disable current reading. fix thread loading. fix power off cleaning job

1 files changed, 16 insertions, 17 deletions

diff --git a/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c b/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c
index a860c553c..5a1bb9063 100644
--- a/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c
+++ b/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c
@@ -43,20 +43,19 @@
         0 THREAD_LOAD_INIT,
         1 THREAD_LOAD_REDUCE_HEAT,                           //HEATERS OFF, DRYER BLOWER OFF, BLOWER LOW,
         2 THREAD_LOAD_SET_LOAD_ARM_TO_START_POSITION,        //USE NOTATION HOW MANY ROTATIONS IN THE DRYER, OR CHECK AGAINST STOPPER. MOVE SLOWLY
-        3 THREAD_LOAD_CENTER_HEAD_ROCKERS,                   //puthead cleaning rockers to middle position
-        4 THREAD_LOAD_OPEN_COVERS,                           //OPEN DYEING HEAD COVER AND DRYER LID
-        5 THREAD_LOAD_LIFT_DANCERS,
-        6 THREAD_LOAD_LIFT_ROCKERS,                          //MACHINE IS READY. SEND MESSAGE, START TIMER TO CLOSE LIDS, WAIT FOR OPERATOR RESPONSE
-        7 THREAD_LOAD_INITIAL_TENSION,                       //CHECK SPOOL PRESENCERUN WINDER UNTIL BREAK SENSOR IS IDENTIFIEING MOVEMENT FOR A SECOND
-        8 THREAD_LOAD_CLOSE_ROCKERS,
-        9 THREAD_LOAD_CLOSE_DANCERS,                         //SEND DANCER MOTORS TO PRESET LOCATION, CHECK THAT THE DANCERS ARE ON THE THREAD
-        10 THREAD_LOAD_CLOSE_LIDS,
-        11 THREAD_LOAD_JOG_FEEDER_TO_MIDDLE_POINT,           //JOG THE FEEDER MOTOR UNTIL THE FEEDER DANCER IS AT MIDDLE POSITION
-        12 THREAD_LOAD_DRYER_LOADING,                        //START FEEDER PID, ROTATE LOADING ARM COUNTER THREAD DIRECTION X CIRCLES ACCORDING TO RML. FEEDER SPEED IS 40
+        3 THREAD_LOAD_OPEN_COVERS,                           //OPEN DYEING HEAD COVER AND DRYER LID
+        4 THREAD_LOAD_LIFT_DANCERS,
+        5 THREAD_LOAD_LIFT_ROCKERS,                          //MACHINE IS READY. SEND MESSAGE, START TIMER TO CLOSE LIDS, WAIT FOR OPERATOR RESPONSE
+        6 THREAD_LOAD_INITIAL_TENSION,                       //CHECK SPOOL PRESENCERUN WINDER UNTIL BREAK SENSOR IS IDENTIFIEING MOVEMENT FOR A SECOND
+        7 THREAD_LOAD_CLOSE_ROCKERS,
+        8 THREAD_LOAD_CLOSE_DANCERS,                         //SEND DANCER MOTORS TO PRESET LOCATION, CHECK THAT THE DANCERS ARE ON THE THREAD
+        9  THREAD_LOAD_CLOSE_LIDS,
+        10 THREAD_LOAD_JOG_FEEDER_TO_MIDDLE_POINT,           //JOG THE FEEDER MOTOR UNTIL THE FEEDER DANCER IS AT MIDDLE POSITION
+        11 THREAD_LOAD_DRYER_LOADING,                        //START FEEDER PID, ROTATE LOADING ARM COUNTER THREAD DIRECTION X CIRCLES ACCORDING TO RML. FEEDER SPEED IS 40
                                                              //KEEP NOTATION HOW MANY ROTATIONS IN THE DRYER
-        13 THREAD_LOAD_RESUME_HEATING,
-        14 THREAD_LOAD_JOG_THREAD,                           //JOG THREAD SHORTLY TO MAKE SURE SPOOL IS RUNNING. REPORT END OF LOADING
-        15 THREAD_LOAD_END
+        12 THREAD_LOAD_RESUME_HEATING,
+        13 THREAD_LOAD_JOG_THREAD,                           //JOG THREAD SHORTLY TO MAKE SURE SPOOL IS RUNNING. REPORT END OF LOADING
+        14 THREAD_LOAD_END
     }THREAD_LOAD_STAGES_ENUM;*/
     THREAD_LOAD_STAGES_ENUM LoadStages = THREAD_LOAD_INIT;
     ProcessParameters ProcessParametersClear,ProcessParametersRecover;
@@ -292,7 +291,7 @@
             LOG_ERROR(MotorId, "Thread_Load_HomingCallback Callback is already 0");
         return OK;
     }
-    uint32_t Thread_Load_Center_Head_Rockers(void)
+    /*uint32_t Thread_Load_Center_Head_Rockers(void)
     {
         REPORT_MSG(LoadStages, "Thread Load State Machine step");
         CallbackCounter++;
@@ -300,7 +299,7 @@
         CallbackCounter++;
         MotorMovetoLimitSwitch (HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANMECH,1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANMECH].directionthreadwize, 80,  Motor_Id_to_LS_IdUp[HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANMECH], Thread_Load_HomingCallback,10000);
         return OK;
-    }
+    }*/
     uint32_t Thread_Load_Open_Covers(void)
     {
         REPORT_MSG(LoadStages, "Thread Load State Machine step");
@@ -658,10 +657,10 @@
             //Thread_Load_Set_Load_Arm_To_Start_Position();
             Thread_Load_Dryer_UnLoading();
             break;
-        case THREAD_LOAD_CENTER_HEAD_ROCKERS:
+        /*case THREAD_LOAD_CENTER_HEAD_ROCKERS:
             //LoadStages++;
             Thread_Load_Center_Head_Rockers();
-            break;
+            break;*/
         case THREAD_LOAD_OPEN_COVERS:  //OPEN DYEING HEAD COVER AND DRYER LID
             //LoadStages++;
             Thread_Load_Open_Covers();