Merge branch 'master' of https://twinetfs.visualstudio.com/Tango/_git/Tango

1 files changed, 25 insertions, 16 deletions

diff --git a/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c b/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c
index 151886016..c478b82de 100644
--- a/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c
+++ b/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c
@@ -164,7 +164,7 @@
     {
 
         if (Is_PP_Machine())
-            kval_upperValue = MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_RLOADING].kvalrun;
+            kval_upperValue = 28;
         else
             kval_upperValue = 70;
 
@@ -208,7 +208,7 @@
         {
             if(Head_Type > HEAD_TYPE_FLAT_WITHOUT_CARD)
             {
-                WHS_Set_SetPoint_Q_value(headairflow*2/3);
+                WHS_Set_SetPoint_Q_value(headairflow);
             }
             else
             {
@@ -349,7 +349,10 @@
         if (Head_Type != HEAD_TYPE_ARC)
         {
             CallbackCounter++;
-            MotorMovetoLimitSwitch (HARDWARE_MOTOR_TYPE__MOTO_DH_LID,1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DH_LID].directionthreadwize, 200,  Motor_Id_to_LS_IdUp[HARDWARE_MOTOR_TYPE__MOTO_DH_LID], Thread_Load_HomingCallback,10000);
+            if (MotorMovetoLimitSwitch (HARDWARE_MOTOR_TYPE__MOTO_DH_LID,1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DH_LID].directionthreadwize, 300,  Motor_Id_to_LS_IdUp[HARDWARE_MOTOR_TYPE__MOTO_DH_LID], Thread_Load_HomingCallback,20000)==ERROR)
+            {
+                Thread_Load_HomingCallback(HARDWARE_MOTOR_TYPE__MOTO_DH_LID,NO_LIMIT);
+            }
         }
         CallbackCounter++;
         //MotorMovetoLimitSwitch (HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID,1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID].directionthreadwize, 200,  Motor_Id_to_LS_IdUp[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID], Thread_Load_HomingCallback,10000);
@@ -366,8 +369,8 @@
         if (Head_Type == HEAD_TYPE_FLAT)
         {
             Report("Thread_Load_Lift_actuators",__FILE__,__LINE__,LOW,RpMessage,false,0);
-            Trigger_Head_Actuators_Control(ACT_IN_AND_OUT, LOW,true);
-            //Trigger_Head_Actuators_Control(ACTIN, LOW,true);
+            Trigger_Head_Actuators_Stub(ACTOT, ENABLE, UP);
+            Trigger_Head_Actuators_Stub(ACTIN, ENABLE, UP);
         }
         return OK;
     }
@@ -395,8 +398,8 @@
     {
         keepmicrostep = MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_RLOADING].microstep;
         keepkvalrun = MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_RLOADING].kvalrun;
-        if (keepkvalrun>=25)
-            keepkvalrun = 25;
+        /*if (keepkvalrun>=25)
+            keepkvalrun = 25;*/
 
         Report("Read_Dryer_ENC_Position()",__FILE__,__LINE__,0,RpWarning,Read_Dryer_ENC_Position(),0);
 
@@ -428,6 +431,7 @@
         if (FPGA_Read_limit_Switches(GPI_SW_SPOOL_EXISTS)==LIMIT)
         {
             REPORT_MSG(LIMIT, "No cone in winder");
+            Thread_Load_HomingCallback(HARDWARE_MOTOR_TYPE__MOTO_WINDER,NO_LIMIT);
             //return ERROR;
         }
         CallbackCounter++;
@@ -440,8 +444,8 @@
     {
         keepmicrostep = MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_RLOADING].microstep;
         keepkvalrun = MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_RLOADING].kvalrun;
-        if (keepkvalrun>=25)
-            keepkvalrun = 25;
+        /*if (keepkvalrun>=25)
+            keepkvalrun = 25;*/
         Report("Thread_Load_Close_Rockers",__FILE__,__LINE__,keepkvalrun,RpMessage,keepmicrostep,0);
 
         MotorSetMicroStep(HARDWARE_MOTOR_TYPE__MOTO_RLOADING, 8);
@@ -460,7 +464,7 @@
     uint32_t Thread_Load_Close_Dancers(void)
     //Send Dancer Motors To Preset Location, Check That The Dancers Are On The Thread
     {
-        uint32_t  current = 0;
+        uint32_t  current = 1;
         REPORT_MSG(LoadStages, "Thread Load State Machine step Thread_Load_Close_Dancers");
         CallbackCounter++;
         MotorMovetoLimitSwitch (HARDWARE_MOTOR_TYPE__MOTO_RDANCER,MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_RDANCER].directionthreadwize, 15,  Motor_Id_to_LS_IdDown[HARDWARE_MOTOR_TYPE__MOTO_RDANCER], Thread_Load_HomingCallback,10000);
@@ -500,14 +504,14 @@
         if (Head_Type == HEAD_TYPE_FLAT)
         {
             Report("Thread_Load_Close_actuators",__FILE__,__LINE__,LOW,RpMessage,true,0);
-            Trigger_Head_Actuators_Control(ACTOT, LOW,false);
-            //Trigger_Head_Actuators_Control(ACTIN, LOW,false);
+            Trigger_Head_Actuators_Stub(ACTOT, ENABLE, DOWN);
+            //Trigger_Head_Actuators_Stub(ACTIN, ENABLE, DOWN);
             HeadCard_Actuators_Relocate();
         }
         if (Head_Type != HEAD_TYPE_ARC)
         {
             CallbackCounter++;
-            MotorMovetoLimitSwitch (HARDWARE_MOTOR_TYPE__MOTO_DH_LID,MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DH_LID].directionthreadwize, 200,  Motor_Id_to_LS_IdDown[HARDWARE_MOTOR_TYPE__MOTO_DH_LID], Thread_Load_HomingCallback,10000);
+            MotorMovetoLimitSwitch (HARDWARE_MOTOR_TYPE__MOTO_DH_LID,MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DH_LID].directionthreadwize, 300,  Motor_Id_to_LS_IdDown[HARDWARE_MOTOR_TYPE__MOTO_DH_LID], Thread_Load_HomingCallback,20000);
         }
         CallbackCounter++;
 //        MotorMovetoLimitSwitch (HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID,MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID].directionthreadwize, 200,  Motor_Id_to_LS_IdDown[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID], Thread_Load_HomingCallback,10000);
@@ -1227,11 +1231,11 @@ uint32_t ThreadLoadControlCBFunction(uint32_t IfIndex, uint32_t ReadValue)
     index = IfIndex&0xFF;
 
     DancerId = ThreadMotorIdToDancerId[index];
-    if (ReadValue < 10)
+    /*if (ReadValue < 10)
     {
         Report("Dancer value read too small.",__FILE__,__LINE__,DancerId,RpError,ReadValue,0);
         return OK;
-    }
+    }*/
     if (ReadValue == 0x3FFF)
     {
         return OK;
@@ -1242,6 +1246,11 @@ uint32_t ThreadLoadControlCBFunction(uint32_t IfIndex, uint32_t ReadValue)
         //pooler dancer is right sided: data is opposite
         TranslatedReadValue = (-1*TranslatedReadValue);
     }
+    if (abs(TranslatedReadValue) > 0x2000)
+    {
+        TranslatedReadValue = 0x3FFF- TranslatedReadValue; //overcome zero environment
+    }
+
     //TranslatedReadValue = 0;//test
     MotorSamples[index][MotorSamplePointer[index]] = TranslatedReadValue;//(-1 * TranslatedReadValue);
     MotorSamplePointer[index]++;
@@ -1469,7 +1478,7 @@ uint32_t ThreadLoadingReport(void)
 
 uint32_t TryThreadLoadingFunc(MessageContainer* requestContainer)
 {
-    TryThreadLoadingRequest *request = continue_thread_loading_request__unpack(NULL, requestContainer->data.len, requestContainer->data.data);
+    TryThreadLoadingRequest *request = try_thread_loading_request__unpack(NULL, requestContainer->data.len, requestContainer->data.data);
     TryThreadLoadingResponse Cresponse = TRY_THREAD_LOADING_RESPONSE__INIT;
     MessageContainer responseContainer;
     MessageState = 2;