Merge branch 'master' of https://twinetfs.visualstudio.com/_git/Tango

2 files changed, 28 insertions, 14 deletions

diff --git a/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c b/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c
index edfa3b0b9..87478d9cb 100644
--- a/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c
+++ b/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c
@@ -69,7 +69,7 @@
         uint32_t LoadArmBackLash;
     }LoadArmInfoStruc;
     LoadArmInfoStruc LoadArmInfo;
-    char LoadArmPath[50] = "0://SWInfo//LoadArm.msg";
+    char LoadArmPath[50] = "0://SysInfo//LoadArm.cfg";
 
     //RUN MOTOR TO SWITCH WITH TIMEOUT
     //RUN MOTOR TO BREAK SENSOR
@@ -85,7 +85,7 @@
         FRESULT Fresult = FR_OK;
         REPORT_MSG(LoadStages, "Thread Load State Machine step");
 
-        LoadArmInfo.LoadArmBackLash = 40;
+        LoadArmInfo.LoadArmBackLash = 10;
         LoadArmInfo.LoadArmRounds = 0xFF;
         Fresult = f_mkdir(SW_INFO_DIR);
         if ((Fresult == FR_OK)||(Fresult == FR_EXIST))
@@ -100,6 +100,7 @@
             }
         }
 
+        Report("Thread_Load_Init",__FILE__,__LINE__,LoadArmInfo.LoadArmBackLash,RpMessage,LoadArmInfo.LoadArmRounds,0);
         memcpy (&ProcessParametersRecover,&ProcessParametersKeep,sizeof(ProcessParameters));
         //NumberOfDrierLoaderCycles = loadLoadArmParameters();
         LoadStages++;
@@ -156,6 +157,7 @@
         {
             Report("Thread_Load_Set_Load_Arm_To_Start_Position_Callback",__FILE__,__LINE__,LoadStages,RpMessage,NumberOfDrierLoaderCycles,0);
             //storeLoadArmParameters();
+            SetMotHome(HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM);  //set this point as the spool home
             LoadStages++;
             //ThreadLoadStateMachine(LoadStages);
         }
@@ -168,6 +170,8 @@
         NumberOfDrierLoaderCycles=0;
         //storeLoadArmParameters();
         LoadStages++;
+        SetMotHome(HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM);  //set this point as the spool home
+
         //ThreadLoadStateMachine(LoadStages);
         return OK;
     }
@@ -241,9 +245,9 @@
     {
         REPORT_MSG(LoadStages, "Thread Load State Machine step");
         CallbackCounter++;
-        MotorMovetoLimitSwitch (HARDWARE_MOTOR_TYPE__MOTO_RDANCER,1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_RDANCER].directionthreadwize, 20,  Motor_Id_to_LS_IdUp[HARDWARE_MOTOR_TYPE__MOTO_RDANCER], Thread_Load_HomingCallback,10000);
+        MotorMovetoLimitSwitch (HARDWARE_MOTOR_TYPE__MOTO_RDANCER,1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_RDANCER].directionthreadwize, 15,  Motor_Id_to_LS_IdUp[HARDWARE_MOTOR_TYPE__MOTO_RDANCER], Thread_Load_HomingCallback,4000);
         CallbackCounter++;
-        MotorMovetoLimitSwitch (HARDWARE_MOTOR_TYPE__MOTO_LDANCER2,1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_LDANCER2].directionthreadwize, 200,  Motor_Id_to_LS_IdUp[HARDWARE_MOTOR_TYPE__MOTO_LDANCER2], Thread_Load_HomingCallback,10000);
+        MotorMovetoLimitSwitch (HARDWARE_MOTOR_TYPE__MOTO_LDANCER1,1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_LDANCER1].directionthreadwize, 500,  Motor_Id_to_LS_IdUp[HARDWARE_MOTOR_TYPE__MOTO_LDANCER1], Thread_Load_HomingCallback,20000);
 
         return OK;
     }
@@ -252,9 +256,9 @@
     {
         REPORT_MSG(LoadStages, "Thread Load State Machine step");
         CallbackCounter++;
-        MotorMovetoLimitSwitch (HARDWARE_MOTOR_TYPE__MOTO_RLOADING,1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_RLOADING].directionthreadwize, 200,  Motor_Id_to_LS_IdUp[HARDWARE_MOTOR_TYPE__MOTO_RLOADING], Thread_Load_HomingCallback,10000);
+        MotorMovetoLimitSwitch (HARDWARE_MOTOR_TYPE__MOTO_RLOADING,1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_RLOADING].directionthreadwize, 700,  Motor_Id_to_LS_IdUp[HARDWARE_MOTOR_TYPE__MOTO_RLOADING], Thread_Load_HomingCallback,10000);
         CallbackCounter++;
-        MotorMovetoLimitSwitch (HARDWARE_MOTOR_TYPE__MOTO_LLOADING,1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_LLOADING].directionthreadwize, 200,  Motor_Id_to_LS_IdUp[HARDWARE_MOTOR_TYPE__MOTO_LLOADING], Thread_Load_HomingCallback,10000);
+        MotorMovetoLimitSwitch (HARDWARE_MOTOR_TYPE__MOTO_LLOADING,1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_LLOADING].directionthreadwize, 700,  Motor_Id_to_LS_IdUp[HARDWARE_MOTOR_TYPE__MOTO_LLOADING], Thread_Load_HomingCallback,10000);
 
         return OK;
     }
@@ -288,9 +292,9 @@
     {
         REPORT_MSG(LoadStages, "Thread Load State Machine step");
         CallbackCounter++;
-        MotorMovetoLimitSwitch (HARDWARE_MOTOR_TYPE__MOTO_RDANCER,MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_RDANCER].directionthreadwize, 200,  Motor_Id_to_LS_IdDown[HARDWARE_MOTOR_TYPE__MOTO_RDANCER], Thread_Load_HomingCallback,10000);
+        MotorMovetoLimitSwitch (HARDWARE_MOTOR_TYPE__MOTO_RDANCER,MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_RDANCER].directionthreadwize, 15,  Motor_Id_to_LS_IdDown[HARDWARE_MOTOR_TYPE__MOTO_RDANCER], Thread_Load_HomingCallback,4000);
         CallbackCounter++;
-        MotorMovetoLimitSwitch (HARDWARE_MOTOR_TYPE__MOTO_LDANCER2,MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_LDANCER2].directionthreadwize, 200,  Motor_Id_to_LS_IdDown[HARDWARE_MOTOR_TYPE__MOTO_LDANCER2], Thread_Load_HomingCallback,10000);
+        MotorMovetoLimitSwitch (HARDWARE_MOTOR_TYPE__MOTO_LDANCER1,MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_LDANCER1].directionthreadwize, 500,  Motor_Id_to_LS_IdDown[HARDWARE_MOTOR_TYPE__MOTO_LDANCER1], Thread_Load_HomingCallback,20000);
 
         return OK;
     }
@@ -337,11 +341,14 @@
     {
         REPORT_MSG(LoadStages, "Thread Load State Machine step");
         LoadArmInfo.LoadArmRounds = 20;
+        uint32_t numberOfSteps = 0;
         //Start Feeder Pid, Rotate Loading Arm Counter Thread Direction X Circles According To Rml. Feeder Speed Is 40
         OriginalMotorSpd_2PPS[FEEDER_MOTOR] = 1000;
+        numberOfSteps = MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].pulseperround*LoadArmInfo.LoadArmRounds*MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].microstep*MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].pulleyradius;
         ControlId = AddControlCallback(ThreadLoadControlCBFunction, eOneMillisecond,Control_Read_Dancer_Position,(IfTypeThread*0x100+FEEDER_MOTOR),FEEDER_DANCER,FEEDER_MOTOR);
+        CallbackCounter++;
         MotorMoveWithCallback (HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM, MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].directionthreadwize,
-                               MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].pulseperround*LoadArmInfo.LoadArmRounds,    Thread_Load_HomingCallback, 100000);
+                               numberOfSteps,    Thread_Load_HomingCallback, 100000);
 
         //Keep Notation How Many Rotations In The Dryer
         //LoadArmInfo.LoadArmBackLash = 0;
@@ -449,17 +456,18 @@
     return OK;
 }
 
-uint32_t ThreadLoadControlCBFunction(uint32_t index, uint32_t ReadValue)
+uint32_t ThreadLoadControlCBFunction(uint32_t IfIndex, uint32_t ReadValue)
 {
     //read value is the dancer angle
     int i;
     int DancerId;
     int32_t TranslatedReadValue, avreageSampleValue = 0;
+    int index=MAX_THREAD_MOTORS_NUM;
     //double tempcalcspeed = 0;
     uint32_t calculated_speed;
     double NormalizedError;
 
-    DancerId = ThreadMotorIdToDancerId[index];
+    DancerId = FEEDER_DANCER;//ThreadMotorIdToDancerId[index];
     if (ReadValue < 10)
     {
         Report("Dancer value read too small.",__FILE__,__LINE__,DancerId,RpError,ReadValue,0);
@@ -470,11 +478,17 @@ uint32_t ThreadLoadControlCBFunction(uint32_t index, uint32_t ReadValue)
         return OK;
     }
     TranslatedReadValue = ReadValue - DancersCfg[DancerId].zeropoint;
-    if (index == POOLER_MOTOR)
+    if (IfIndex>>8 != IfTypeThread)
+    {
+        LOG_ERROR (IfIndex, "Wrong  Interface type");
+        return 0xFFFFFFFF;
+    }
+    index = IfIndex&0xFF;
+    /*if (index == POOLER_MOTOR)
     {
         //pooler dancer is right sided: data is opposite
         TranslatedReadValue = (-1*TranslatedReadValue);
-    }
+    }*/
     //TranslatedReadValue = 0;//test
     MotorSamples[index][MotorSamplePointer[index]] = TranslatedReadValue;//(-1 * TranslatedReadValue);
     MotorSamplePointer[index]++;
diff --git a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_init.c b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_init.c
index b414611ff..14a74ffbe 100644
--- a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_init.c
+++ b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_init.c
@@ -106,7 +106,7 @@ uint32_t MotorPidRequestMessage(HardwarePidControl* request)
     DancerStopActivityLimit[Motor_i] = temp/(2*PI*DancersCfg[ThreadMotorIdToDancerId[Motor_i]].armlength);
     return OK;
 }
-char DancerConfigPath[50] = "0://SWInfo//DancCfg.msg";
+char DancerConfigPath[50] = "0://SysInfo//DancCfg.cfg";
 
 uint32_t StoreDancerConfigMessage()
 {