Merge branch 'master' of https://twinetfs.visualstudio.com/Tango/_git/Tango

4 files changed, 88 insertions, 10 deletions

diff --git a/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c b/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c
index 63072e4d8..cdb726b5e 100644
--- a/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c
+++ b/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c
@@ -49,6 +49,7 @@
 #include "PMR/ThreadLoading/TryThreadLoadingResponse.pb-c.h"
 #include "PMR/ThreadLoading/StopThreadLoadingRequest.pb-c.h"
 #include "PMR/ThreadLoading/StopThreadLoadingResponse.pb-c.h"
+#include "PMR/ThreadLoading/AttemptThreadJoggingResponse.pb-c.h"
 
 //#include <stdint.h>
 //#include <stdbool.h>
@@ -1597,3 +1598,52 @@ uint32_t StopThreadLoadingFunc(MessageContainer* requestContainer)
     return OK;
 
 }
+uint8_t attemptJogCounter = 0;
+#define ATTEMPT_JOG_TIMEOUT 18
+char AttemptJoggingToken[36+1] = {0};
+
+uint32_t AttemptThreadJoggingCallback(uint32_t index, uint32_t ReadValue)
+{
+    AttemptThreadJoggingResponse response = ATTEMPT_THREAD_JOGGING_RESPONSE__INIT;
+    MessageContainer responseContainer;
+
+    attemptJogCounter++;
+    Report("AttemptThreadJoggingCallback",__FILE__,attemptJogCounter,JobEndReason,RpWarning,(int)JobIsActive(),0);
+    if (attemptJogCounter<ATTEMPT_JOG_TIMEOUT)
+    {
+        if (JobIsActive() == true)//jog still preparing/running
+            return OK;
+    }
+    if (JobEndReason == JOB_OK)
+        ThreadAbortJoggingFunc();
+    else
+    {
+        responseContainer.has_error = true;
+        responseContainer.error = getJobError_to_ErrorCode(JobEndReason);
+    }
+    SafeRemoveControlCallback(LoadingControlId, AttemptThreadJoggingCallback );
+    LoadingControlId = 0xFF;
+
+    if (AttemptJoggingToken[0])
+    {
+        responseContainer = createContainer(MESSAGE_TYPE__AttemptThreadJoggingResponse, AttemptJoggingToken, true, &response, &attempt_thread_jogging_response__pack, &attempt_thread_jogging_response__get_packed_size);
+        responseContainer.continuous = false;
+        uint8_t* container_buffer = my_malloc(message_container__get_packed_size(&responseContainer));
+        size_t container_size = message_container__pack(&responseContainer, container_buffer);
+        my_free(responseContainer.data.data);
+        SendChars((char*)container_buffer, container_size);
+    }
+    return OK;
+
+}
+uint32_t AttemptThreadJoggingFunc(MessageContainer* requestContainer)
+{
+        attemptJogCounter = 0;
+        if(requestContainer)
+            ustrncpy (AttemptJoggingToken, requestContainer->token,36);
+        Report("AttemptThreadJoggingFunc",__FILE__,__LINE__,0xFF,RpWarning,(int)ATTEMPT_JOG_TIMEOUT,0);
+        LoadingControlId = AddControlCallback("Load jog",AttemptThreadJoggingCallback, eOneSecond,TemplateDataReadCBFunction,0,0,0);
+        ThreadJoggingFunc(30);
+        return OK;
+}
+
diff --git a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_Winder.c b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_Winder.c
index a6cb25c45..8ecb3f404 100644
--- a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_Winder.c
+++ b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_Winder.c
@@ -141,6 +141,25 @@ uint32_t InternalWindingConfigMessage(JobSpool* request)
  * report ready to the job STM
  */
 int Screw_wait_counter;
+uint32_t Winder_Check_Cone(void)
+{
+    if (FPGA_Read_limit_Switches(GPI_SW_SPOOL_EXISTS)==LIMIT)
+    {
+        REPORT_MSG(LIMIT, "No cone in winder");
+        if (Is_PP_Machine())
+        {
+            if (IgnoreConeMissing == false)
+            {
+                //JobEndReason = JOB_THREAD_BREAK;
+                usnprintf(AlarmReasonStr, 100, "No cone in winder");
+                //PrepareReady(Module_Winder,ModuleFail);
+                AlarmHandlingSetAlarm(EVENT_TYPE__WINDER_CONE_DOES_NOT_EXIST,true);
+                return JOB_THREAD_BREAK;
+            }
+        }
+    }
+    return JOB_OK;
+}
 uint32_t Winder_Prepare(void *JobDetails)
 {
     JobTicket* JobTicket = JobDetails;
@@ -159,7 +178,7 @@ uint32_t Winder_Prepare(void *JobDetails)
      * report ready to the job STM
      */
 
-    if (FPGA_Read_limit_Switches(GPI_SW_SPOOL_EXISTS)==LIMIT)
+    /*if (FPGA_Read_limit_Switches(GPI_SW_SPOOL_EXISTS)==LIMIT)
     {
         REPORT_MSG(LIMIT, "No cone in winder");
         if (Is_PP_Machine())
@@ -173,7 +192,7 @@ uint32_t Winder_Prepare(void *JobDetails)
                 return ERROR;
             }
         }
-    }
+    }*/
 
 #ifdef READ_SCREW_ENCODER
     ScrewLocationRun[0] = 0;
diff --git a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_ex.h b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_ex.h
index 0861b677b..07ecf5d0b 100644
--- a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_ex.h
+++ b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_ex.h
@@ -53,6 +53,7 @@ uint32_t LoadDancerConfigMessage(void);
 extern float NumberOfRotationPerPassage; //debug for rotation per passage trials
 
 uint32_t Winder_Init(void);
+uint32_t Winder_Check_Cone(void);
 uint32_t Winder_Prepare(void *JobDetails);
 uint32_t Winder_Presegment(void *JobDetails, uint32_t SegmentId);
 uint32_t WinderDistanceToSpoolState(void );
@@ -88,6 +89,8 @@ uint32_t StartThreadLoadingFunc(MessageContainer* requestContainer);
 uint32_t ContinueThreadLoadingFunc(MessageContainer* requestContainer);
 uint32_t StopThreadLoadingFunc(MessageContainer* requestContainer);
 uint32_t TryThreadLoadingFunc(MessageContainer* requestContainer);
+uint32_t AttemptThreadJoggingFunc(MessageContainer* requestContainer);
+
 void ThreadCheckArcHeadCovers(void);
 uint32_t Thread_Load_End(void);
 uint32_t ThreadLoadingRestartReport(void); //sending after a failure in the finalizing stage
diff --git a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_print.c b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_print.c
index bc4e6cb8f..8d41f3b9a 100644
--- a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_print.c
+++ b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_print.c
@@ -337,7 +337,7 @@ uint32_t PoolerThreadLengthCBFunction(uint32_t IfIndex, uint32_t ReadValue)
         }**/
 
     //}
-#ifdef BTSR_NO_TFU
+#ifdef BTSR_NO_PULLER_TFU
         if (CurrentControlledSpeed[WINDER_MOTOR]>100)
             length = dyeingspeed/10;
 #endif
@@ -917,7 +917,7 @@ uint32_t Release_Right_TFU_TensionCallback(uint32_t deviceID, uint32_t BusyFlag)
 uint32_t Release_Right_TFU_Tension()
 {
     uint32_t status = OK;
-#ifndef BTSR_NO_TFU
+#ifndef BTSR_NO_FEEDER_TFU
     if (RTFU_Up == true)
     {
         Report("Release_Right_TFU_Tension",__FILE__,__LINE__,HARDWARE_MOTOR_TYPE__MOTO_RDANCER,RpMessage,MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_RDANCER].pulseperround/4,0);
@@ -931,7 +931,7 @@ int SecondFeederCorrection = 4;
 int PrepareWaitCount = 0;
 uint32_t Adjust_Right_TFU_Tension_2nd_Callback(uint32_t MotorId, uint32_t ReadValue)
 {
-#ifndef BTSR_NO_TFU
+#ifndef BTSR_NO_FEEDER_TFU
     MotorStop (HARDWARE_MOTOR_TYPE__MOTO_RDANCER,Soft_Stop); //per L6470 errata between mov and run commands
     Report("Adjust_Right_TFU_Tension_2ndCallback x more steps",__FILE__,__LINE__,MotorId,RpMessage,SecondFeederCorrection,0);
     if (JobIsActive()==false)
@@ -955,7 +955,7 @@ uint32_t Adjust_Right_TFU_Tension_2nd_Callback(uint32_t MotorId, uint32_t ReadVa
 }
 uint32_t Adjust_Right_TFU_Tension_Callback(uint32_t MotorId, uint32_t ReadValue)
 {
-#ifndef BTSR_NO_TFU
+#ifndef BTSR_NO_FEEDER_TFU
     Report("Adjust_Right_TFU_Tension_Callback",__FILE__,__LINE__,MotorId,RpMessage,0,0);
     MotorMoveWithCallback(HARDWARE_MOTOR_TYPE__MOTO_RDANCER, 1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_RDANCER].directionthreadwize,SecondFeederCorrection* MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_RDANCER].microstep, Adjust_Right_TFU_Tension_2nd_Callback,1000);
     RTFU_Up = true;
@@ -966,7 +966,7 @@ uint32_t Adjust_Right_TFU_Tension_Callback(uint32_t MotorId, uint32_t ReadValue)
 uint32_t Adjust_Right_TFU_Tension(double tension)
 {
     uint32_t status = OK;
-#ifndef BTSR_NO_TFU
+#ifndef BTSR_NO_FEEDER_TFU
     if (tension > 0.5) //0 = lower position, 1 = high position
     {
         if (FPGA_Read_limit_Switches(GPI_LS_RDANCER_UP) == NO_LIMIT)
@@ -1093,11 +1093,13 @@ uint32_t ThreadPrepareState(void *JobDetails)
     IntersegmentLength = JobTicket->intersegmentlength;
 
     PrepareWaitCount = 0;
-#ifndef BTSR_NO_TFU
     status = ThreadPrepare_Tension (HARDWARE_DANCER_TYPE__LeftDancer, windertension);
     ReportWithPackageFilter(ThreadFilter,"ThreadPrepare_Tension Winder",__FILE__,HARDWARE_DANCER_TYPE__LeftDancer,PrepareWaitCount,RpWarning,(int)windertension,0);
+#ifndef BTSR_NO_PULLER_TFU
     status = ThreadPrepare_Tension (HARDWARE_DANCER_TYPE__MiddleDancer, pullertension);
     ReportWithPackageFilter(ThreadFilter,"ThreadPrepare_Tension Puller",__FILE__,HARDWARE_DANCER_TYPE__MiddleDancer,PrepareWaitCount,RpWarning,(int)pullertension,0);
+#endif
+#ifndef BTSR_NO_FEEDER_TFU
     status = ThreadPrepare_Tension (HARDWARE_DANCER_TYPE__RightDancer, feedertension);
     ReportWithPackageFilter(ThreadFilter,"ThreadPrepare_Tension Feeder",__FILE__,HARDWARE_DANCER_TYPE__RightDancer,PrepareWaitCount,RpWarning,(int)feedertension,0);
 #endif
@@ -1219,7 +1221,7 @@ uint32_t ThreadPrepareState(void *JobDetails)
 /////////////////////////////////////////////////////
         MotorSetDirection((TimerMotors_t)HW_Motor_Id,MotorsCfg[HW_Motor_Id].directionthreadwize);
 
-#ifndef BTSR_NO_TFU
+#ifndef BTSR_NO_FEEDER_TFU
         if (Motor_i == FEEDER_MOTOR) // dryer motor is speed controlled. later a speed sensor will be utilized, but for now it will not be controlled
         {
             ReportWithPackageFilter(ThreadFilter,"Feeder Control",__FILE__,Motor_i,MotorControlConfig[Motor_i].m_params.Kp,RpWarning,MotorControlConfig[Motor_i].m_params.Ki,0);
@@ -1233,6 +1235,7 @@ uint32_t ThreadPrepareState(void *JobDetails)
             SpeedControlId = AddControlCallback(NULL,ThreadLengthCBFunction, eHundredMillisecond,MotorGetPositionFromFPGA,(IfTypeThread*0x100+Motor_i),ThreadMotorIdToMotorId[Motor_i],Motor_i);
         }
 #endif
+#ifndef BTSR_NO_PULLER_TFU
         if (Motor_i == POOLER_MOTOR) // dryer motor is speed controlled. later a speed sensor will be utilized, but for now it will not be controlled
         {
             ReportWithPackageFilter(ThreadFilter,"Puller Control",__FILE__,Motor_i,MotorControlConfig[Motor_i].m_params.Kp,RpWarning,MotorControlConfig[Motor_i].m_params.Ki,0);
@@ -1246,7 +1249,8 @@ uint32_t ThreadPrepareState(void *JobDetails)
             PoolerLengthCalculationMultiplier = (MotorsCfg[ThreadMotorIdToMotorId[Motor_i]].pulleyradius*2*PI)/(MotorsCfg[ThreadMotorIdToMotorId[Motor_i]].pulseperround*MotorsCfg[ThreadMotorIdToMotorId[Motor_i]].microstep);
             PoolerSpeedControlId = AddControlCallback(NULL,PoolerThreadLengthCBFunction, eHundredMillisecond,MotorGetPositionFromFPGA,(IfTypeThread*0x100+Motor_i),ThreadMotorIdToMotorId[Motor_i],Motor_i);
         }
-#ifndef BTSR_NO_TFU
+#endif
+#ifndef BTSR_NO_FEEDER_TFU
             if (Motor_i == FEEDER_MOTOR) // dryer motor is speed controlled. later a speed sensor will be utilized, but for now it will not be controlled
             {
                 if (ControlIdtoMotorId[Motor_i] != 0xFF)
@@ -1261,6 +1265,8 @@ uint32_t ThreadPrepareState(void *JobDetails)
                 //AddControlCallback(NULL,ThreadControlSpeedReadFunction, eHundredMillisecond,MotorGetSpeedFromFPGA,(IfTypeThread*0x100+Motor_i),ThreadMotorIdToMotorId[Motor_i],Motor_i);
 #endif
             }
+#endif
+#ifndef BTSR_NO_PULLER_TFU
             if (Motor_i == POOLER_MOTOR) // dryer motor is speed controlled. later a speed sensor will be utilized, but for now it will n//ot be controlled
             {
                 if (ControlIdtoMotorId[Motor_i] != 0xFF)