head type name change

9 files changed, 52 insertions, 44 deletions

diff --git a/Software/Embedded_SW/Embedded/Modules/Control/MillisecTask.c b/Software/Embedded_SW/Embedded/Modules/Control/MillisecTask.c
index 27fc8a707..242bdc3ce 100644
--- a/Software/Embedded_SW/Embedded/Modules/Control/MillisecTask.c
+++ b/Software/Embedded_SW/Embedded/Modules/Control/MillisecTask.c
@@ -621,7 +621,7 @@ uint32_t MillisecLowLoop(uint32_t tick)
     //ROM_IntMasterDisable();
     int StartPT100 = 0;
     //Screw_ENC_Velocity_to_DAC(); - for testing the screw enc
-    if (Head_Type > HEAD_TYPE_SYLKO_WITHOUT_CARD)
+    if (Head_Type > HEAD_TYPE_FLAT_WITHOUT_CARD)
         StartPT100 = TEMP_SENSE_ANALOG_DRYER_TEMP1;
     if (Ten_msTick)
     {
diff --git a/Software/Embedded_SW/Embedded/Modules/Diagnostics/DiagnosticActions.c b/Software/Embedded_SW/Embedded/Modules/Diagnostics/DiagnosticActions.c
index d872b30b5..79e84ebca 100644
--- a/Software/Embedded_SW/Embedded/Modules/Diagnostics/DiagnosticActions.c
+++ b/Software/Embedded_SW/Embedded/Modules/Diagnostics/DiagnosticActions.c
@@ -378,7 +378,7 @@ uint32_t SetBlowerStateRequestFunc(MessageContainer* requestContainer)
                 Turn_the_Blower_Off();
             break;
         case HARDWARE_BLOWER_TYPE__HeadBlower1:
-            if (Head_Type == HEAD_TYPE_STAPLE_SPUN)
+            if (Head_Type == HEAD_TYPE_ARC)
             {
                 if ((request->has_voltage)&&(request->isactive == true))
                     Trigger_Head_Fan_Control(HEAD_FAN_RIGHT,request->voltage);
@@ -390,7 +390,7 @@ uint32_t SetBlowerStateRequestFunc(MessageContainer* requestContainer)
 
             break;
         case HARDWARE_BLOWER_TYPE__HeadBlower2:
-            if (Head_Type == HEAD_TYPE_STAPLE_SPUN)
+            if (Head_Type == HEAD_TYPE_ARC)
             {
                 if ((request->has_voltage)&&(request->isactive == true))
                     Trigger_Head_Fan_Control(HEAD_FAN_LEFT,request->voltage);
diff --git a/Software/Embedded_SW/Embedded/Modules/Diagnostics/Diagnostics.c b/Software/Embedded_SW/Embedded/Modules/Diagnostics/Diagnostics.c
index 0e91f4211..ed817f9cc 100644
--- a/Software/Embedded_SW/Embedded/Modules/Diagnostics/Diagnostics.c
+++ b/Software/Embedded_SW/Embedded/Modules/Diagnostics/Diagnostics.c
@@ -425,8 +425,8 @@ void CopyTemperaturesToMonitor(void)
             HeaterCounterIndex[HEATER_TYPE__HeaterZone2];
     DiagnosticsMonitor.n_headzone3temperature =
             HeaterCounterIndex[HEATER_TYPE__HeaterZone3];
-    if ((Head_Type == HEAD_TYPE_SYLKO)
-            || (Head_Type == HEAD_TYPE_SYLKO_WITHOUT_CARD))
+    if ((Head_Type == HEAD_TYPE_FLAT)
+            || (Head_Type == HEAD_TYPE_FLAT_WITHOUT_CARD))
     {
         DiagnosticsMonitor.headzone4temperature =
                 HeaterTemperature[HEATER_TYPE__HeaterZone4];
@@ -441,7 +441,7 @@ void CopyTemperaturesToMonitor(void)
         DiagnosticsMonitor.n_headzone6temperature =
                 HeaterCounterIndex[HEATER_TYPE__HeaterZone6];
     }
-    if (Head_Type == HEAD_TYPE_SYLKO)
+    if (Head_Type == HEAD_TYPE_FLAT)
     {
         DiagnosticsMonitor.headzone7temperature =
                 HeaterTemperature[HEATER_TYPE__HeaterZone7];
@@ -478,7 +478,7 @@ void CopyTemperaturesToMonitor(void)
                 HeaterCounterIndex[HEATER_TYPE__HeadCoverHeater2];
     }
     //if ((Head_Type == HEAD_TYPE_SYLKO)||(Head_Type == HEAD_TYPE_STAPLE_SPUN))
-    if (Head_Type == HEAD_TYPE_STAPLE_SPUN)
+    if (Head_Type == HEAD_TYPE_ARC)
     {
         DiagnosticsMonitor.headcoverheater1temperature =
                 HeaterTemperature[HEATER_TYPE__HeadCoverHeater1];
@@ -613,7 +613,7 @@ void DiagnosticOneMinuteCollection(void)
     DiagnosticsMonitor.midtank7level = MidTankpressure[6];
     DiagnosticsMonitor.n_midtank8level = 1;
     DiagnosticsMonitor.midtank8level = MidTankpressure[7];
-    if (Head_Type > HEAD_TYPE_SYLKO_WITHOUT_CARD) //rapid/pp machines
+    if (Head_Type > HEAD_TYPE_FLAT_WITHOUT_CARD) //rapid/pp machines
     {
         /*DiagnosticsMonitor.n_drierzone1heatercurrent = 1;
         DiagnosticsMonitor.drierzone1heatercurrent = HeatersCurrent[HEATER_DRYER_CURRENT_1];
@@ -622,7 +622,7 @@ void DiagnosticOneMinuteCollection(void)
         Get_Head_Current(HEAD_CURRENT_MIXER,&HeadCurrent[HEAD_CURRENT_ZONE_12+1][0]);
         DiagnosticsMonitor.n_mixer1heatercurrent = 1;
         DiagnosticsMonitor.mixer1heatercurrent = HeadCurrent[HEAD_CURRENT_ZONE_12+1];
-        if (Head_Type == HEAD_TYPE_SYLKO)
+        if (Head_Type == HEAD_TYPE_FLAT)
         {
             for (i=0;i<HEAD_CURRENT_ZONE_12;i++)
             {
@@ -853,7 +853,7 @@ void DiagnosticOneSecCollection(void)
     int i;
     memset(HeaterCounterIndex,0,sizeof(HeaterCounterIndex));
 
-    if (Head_Type > HEAD_TYPE_SYLKO_WITHOUT_CARD) //rapid/pp machines
+    if (Head_Type > HEAD_TYPE_FLAT_WITHOUT_CARD) //rapid/pp machines
     {
         AcVoltage = ReadVAC();
         DiagnosticsMonitor.whsblower2voltage = &AcVoltage;
@@ -898,7 +898,7 @@ void DiagnosticOneSecCollection(void)
     DiagnosticsMonitor.n_drierzone2heatercurrent = 1;
     DiagnosticsMonitor.drierzone2heatercurrent = HeatersCurrent[HEATER_DRYER_CURRENT_2];
 
-    if (Head_Type == HEAD_TYPE_SYLKO_WITHOUT_CARD)
+    if (Head_Type == HEAD_TYPE_FLAT_WITHOUT_CARD)
     {
         DiagnosticLoadTemperature(HARDWARE_PID_CONTROL_TYPE__MixerHeater, MillisecGetTemperatures( MIXER_PT100));
         DiagnosticLoadTemperature(HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ1, MillisecGetTemperatures(TEMP_SENSE_ANALOG_DYEINGH_TEMP1));
@@ -908,7 +908,7 @@ void DiagnosticOneSecCollection(void)
         DiagnosticLoadTemperature(HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ5, MillisecGetTemperatures(TEMP_SENSE_ANALOG_DYEINGH_TEMP5));
         DiagnosticLoadTemperature(HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ6, MillisecGetTemperatures(HEAD6_PT100));
     }
-    if (Head_Type == HEAD_TYPE_SYLKO)
+    if (Head_Type == HEAD_TYPE_FLAT)
     {
         DiagnosticLoadTemperature(HEATER_TYPE__MixerHeater, MillisecGetTemperatures( HEAD_PT100_MIXER_0X8E_0));
         DiagnosticLoadTemperature(HEATER_TYPE__HeaterZone1, MillisecGetTemperatures(HEAD_PT100_ZONE_1_0X80_0));
@@ -927,7 +927,7 @@ void DiagnosticOneSecCollection(void)
         DiagnosticLoadTemperature(HEATER_TYPE__HeadCoverHeater1, MillisecGetTemperatures(HEAD_PT100_AIR_HEATER_2_0X8C_1));
         DiagnosticLoadTemperature(HEATER_TYPE__HeadCoverHeater2, MillisecGetTemperatures(HEAD_PT100_AIR_HEATER_1_0X8C_0));
     }
-    if (Head_Type == HEAD_TYPE_STAPLE_SPUN)
+    if (Head_Type == HEAD_TYPE_ARC)
     {
         DiagnosticLoadTemperature(HEATER_TYPE__MixerHeater, MillisecGetTemperatures( HEAD_PT100_MIXER_0X8E_0));
         DiagnosticLoadTemperature(HEATER_TYPE__HeaterZone1, MillisecGetTemperatures(HEAD_PT100_ZONE_1_0X80_0));
@@ -1208,22 +1208,22 @@ void SendDiagnostics(void)
     LoadHeaterState(HEATER_TYPE__HeaterZone2,&HeaterInfo[i++]);
     LoadHeaterState(HEATER_TYPE__HeaterZone3,&HeaterInfo[i++]);
 
-    if ((Head_Type == HEAD_TYPE_SYLKO)||(Head_Type == HEAD_TYPE_SYLKO_WITHOUT_CARD))
+    if ((Head_Type == HEAD_TYPE_FLAT)||(Head_Type == HEAD_TYPE_FLAT_WITHOUT_CARD))
     {
         LoadHeaterState(HEATER_TYPE__HeaterZone4,&HeaterInfo[i++]);    
     }
 	LoadHeaterState(HEATER_TYPE__HeaterZone5,&HeaterInfo[i++]);
 	//LoadHeaterState(HEATER_TYPE__HeaterZone6,&HeaterInfo[i++]);
-	 if ((Head_Type == HEAD_TYPE_SYLKO)||(Head_Type == HEAD_TYPE_SYLKO_WITHOUT_CARD))
+	 if ((Head_Type == HEAD_TYPE_FLAT)||(Head_Type == HEAD_TYPE_FLAT_WITHOUT_CARD))
     {
         LoadHeaterState(HEATER_TYPE__HeaterZone6,&HeaterInfo[i++]);  
     }
-	if ((Head_Type == HEAD_TYPE_SYLKO)||(Head_Type == HEAD_TYPE_STAPLE_SPUN))
+	if ((Head_Type == HEAD_TYPE_FLAT)||(Head_Type == HEAD_TYPE_ARC))
 	{
         LoadHeaterState(HEATER_TYPE__HeaterZone7,&HeaterInfo[i++]);
 		//LoadHeaterState(HEATER_TYPE__HeaterZone8,&HeaterInfo[i++]);
 	}
-    if (Head_Type == HEAD_TYPE_SYLKO)
+    if (Head_Type == HEAD_TYPE_FLAT)
     {		
         LoadHeaterState(HEATER_TYPE__HeaterZone8,&HeaterInfo[i++]);
 		LoadHeaterState(HEATER_TYPE__HeaterZone9,&HeaterInfo[i++]);
@@ -1231,7 +1231,7 @@ void SendDiagnostics(void)
         LoadHeaterState(HEATER_TYPE__HeaterZone11,&HeaterInfo[i++]);
         LoadHeaterState(HEATER_TYPE__HeaterZone12,&HeaterInfo[i++]);
     }
-    if ((Head_Type == HEAD_TYPE_SYLKO)||(Head_Type == HEAD_TYPE_STAPLE_SPUN))
+    if ((Head_Type == HEAD_TYPE_FLAT)||(Head_Type == HEAD_TYPE_ARC))
     //if (Head_Type == HEAD_TYPE_STAPLE_SPUN)
     {
         LoadHeaterState(HEATER_TYPE__HeadCoverHeater1,&HeaterInfo[i++]);
diff --git a/Software/Embedded_SW/Embedded/Modules/General/process.c b/Software/Embedded_SW/Embedded/Modules/General/process.c
index 30a99ac86..7530408c9 100644
--- a/Software/Embedded_SW/Embedded/Modules/General/process.c
+++ b/Software/Embedded_SW/Embedded/Modules/General/process.c
@@ -198,7 +198,7 @@ uint32_t HandleProcessParameters(ProcessParameters* ProcessParams,bool saveData)
     {
         status |= HeaterCommandRequestMessage(HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ3, false,ProcessParams->headzone3temp);
     }
-    if(Head_Type != HEAD_TYPE_STAPLE_SPUN)
+    if(Head_Type != HEAD_TYPE_ARC)
     {
         Trigger_HeaterWriting();
         if (ProcessParams->headzone4temp>1)
@@ -230,7 +230,7 @@ uint32_t HandleProcessParameters(ProcessParameters* ProcessParams,bool saveData)
         status |= HeaterCommandRequestMessage(HARDWARE_PID_CONTROL_TYPE__DryerAirTemperature, true,ProcessParams->dryerzone1temp);
     else
         status |= HeaterCommandRequestMessage(HARDWARE_PID_CONTROL_TYPE__DryerAirTemperature, false,ProcessParams->dryerzone1temp);
-    if(Head_Type == HEAD_TYPE_SYLKO)
+    if(Head_Type == HEAD_TYPE_FLAT)
     {
         if (ProcessParams->headzone7temp>1)
         {
@@ -283,7 +283,7 @@ uint32_t HandleProcessParameters(ProcessParameters* ProcessParams,bool saveData)
             status |= HeaterCommandRequestMessage(HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ12, false,ProcessParams->headzone12temp);
         }
     }
-    if(Head_Type == HEAD_TYPE_STAPLE_SPUN)
+    if(Head_Type == HEAD_TYPE_ARC)
     {
         Trigger_HeaterWriting();
         if (ProcessParams->rblowertemp>1)
diff --git a/Software/Embedded_SW/Embedded/Modules/Heaters/Heaters_print.c b/Software/Embedded_SW/Embedded/Modules/Heaters/Heaters_print.c
index ec743ea4a..52e9a6e85 100644
--- a/Software/Embedded_SW/Embedded/Modules/Heaters/Heaters_print.c
+++ b/Software/Embedded_SW/Embedded/Modules/Heaters/Heaters_print.c
@@ -113,7 +113,7 @@ void initializeArrays(void)
         HeaterId2PT100Id[i] = 0xFF;
         HeaterId2CurrentId[i] = NUM_OF_CURRENT_HEATERS;
     }
-    if (Head_Type > HEAD_TYPE_SYLKO_WITHOUT_CARD)
+    if (Head_Type > HEAD_TYPE_FLAT_WITHOUT_CARD)
     {
         HeaterId2PT100Id[HEATER_TYPE__DryerAirHeater] =       DRYER_AIR_PT100;
         HeaterId2PT100Id[HEATER_TYPE__DryerMainHeater] =      DRYER_MAIN_PT100;
@@ -466,7 +466,7 @@ uint32_t HeatersSingleHeaterEnd(int HeaterId)
             HeaterCmd[HeaterId].targettemperatue = 0;
             HeaterReady[HeaterId] = true;
             HeaterAtTemp[HeaterId] = true;
-            if(Head_Type > HEAD_TYPE_SYLKO_WITHOUT_CARD)
+            if(Head_Type > HEAD_TYPE_FLAT_WITHOUT_CARD)
                 Disable_Reading_Heaters_ADC(HeaterId2CurrentId[HeaterId]);
             else
                 Disable_Reading_Heaters_Current(HeaterId2CurrentId[HeaterId]);
@@ -722,7 +722,7 @@ void PrepareACHeater(int HeaterId,uint32_t Frequency, uint32_t SetTemperatue)
     HeaterAtTemp[HeaterId] = false;
     if (BlowerCfg.enabled == true)
     {
-        if(Head_Type > HEAD_TYPE_SYLKO_WITHOUT_CARD)
+        if(Head_Type > HEAD_TYPE_FLAT_WITHOUT_CARD)
         {
             WHS_Set_SetPoint_Q_value(headairflow*2/3);
         }
@@ -786,7 +786,7 @@ int PrepareDCHeater(int HeaterId, uint32_t Frequency, uint32_t SetTemperatue)
 
     if (HeaterPreviousRead[HeaterId] < HeaterCmd[HeaterId].targettemperatue )
     {
-        if(Head_Type > HEAD_TYPE_SYLKO_WITHOUT_CARD)
+        if(Head_Type > HEAD_TYPE_FLAT_WITHOUT_CARD)
             Enable_Reading_Heaters_ADC(HeaterId2CurrentId[HeaterId]);
         else
             Enable_Reading_Heaters_Current(HeaterId2CurrentId[HeaterId]);
@@ -1244,7 +1244,7 @@ uint32_t HeaterControlCBFunction(uint32_t IfIndex, uint32_t readValue)
             AlarmHandlingSetAlarm(HeaterUnderEventType[index], false);
             /*if (BlowerCfg.enabled == true)
             {
-                if(Head_Type > HEAD_TYPE_SYLKO_WITHOUT_CARD)
+                if(Head_Type > HEAD_TYPE_FLAT_WITHOUT_CARD)
                 {
                     WHS_Set_SetPoint_Q_value(headairflow);
                 }
@@ -1281,7 +1281,7 @@ uint32_t HeaterControlCBFunction(uint32_t IfIndex, uint32_t readValue)
             IncreaseBlower = true;
             if (BlowerCfg.enabled == true)
             {
-                if(Head_Type > HEAD_TYPE_SYLKO_WITHOUT_CARD)
+                if(Head_Type > HEAD_TYPE_FLAT_WITHOUT_CARD)
                 {
                     WHS_Set_SetPoint_Q_value(headairflow);
                 }
@@ -1454,7 +1454,7 @@ uint32_t DCHeaterControlCBFunction(uint32_t IfIndex, uint32_t readValue)
             //DCInitialHeating[index] = false;
             HeatersControlStart();
             AlarmHandlingSetAlarm(HeaterUnderEventType[index], false);
-            if(Head_Type > HEAD_TYPE_SYLKO_WITHOUT_CARD)
+            if(Head_Type > HEAD_TYPE_FLAT_WITHOUT_CARD)
                 Disable_Reading_Heaters_ADC(HeaterId2CurrentId[index]);
             else
                 Disable_Reading_Heaters_Current(HeaterId2CurrentId[index]);
@@ -1560,9 +1560,9 @@ void EightMilliSecondHeatersInterrupt(UArg arg0)
         ROM_TimerLoadSet(Heater_timerBase, TIMER_A,OutputProportionalSingleStep);
     }
     else
-	{
+    {
         TimerDisable(Heater_timerBase, TIMER_A);
-	}
+    }
     //
     // Enable all interrupts.
     //
@@ -1649,7 +1649,7 @@ uint32_t DrierHeaterVoltageSetup(void)
     }
     Histeresis = 0;
 #ifndef VAC_TEST
-    if (Head_Type > HEAD_TYPE_SYLKO_WITHOUT_CARD) //rapid/pp machines
+    if (Head_Type > HEAD_TYPE_FLAT_WITHOUT_CARD) //rapid/pp machines
 #endif
     {
         DrierAcVoltage = ReadVAC();
diff --git a/Software/Embedded_SW/Embedded/Modules/IDS/IDS_Cleaning.c b/Software/Embedded_SW/Embedded/Modules/IDS/IDS_Cleaning.c
index c6be46bca..8347c5ee9 100644
--- a/Software/Embedded_SW/Embedded/Modules/IDS/IDS_Cleaning.c
+++ b/Software/Embedded_SW/Embedded/Modules/IDS/IDS_Cleaning.c
@@ -51,7 +51,7 @@ int Tup = 4,Tdelay1 = 9,Tdelay2 = 29;
 
 uint32_t IDS_Cleaning_Move_Actuators()
 {
-   if(Head_Type != HEAD_TYPE_SYLKO)
+   if(Head_Type != HEAD_TYPE_FLAT)
        return OK;
    if (CleaningStageCounter == 1)
    {
@@ -83,7 +83,7 @@ uint32_t IDS_Cleaning_Move_Actuators()
 
    return OK;
 }
-/*uint32_t IDS_Cleaning_Move_Rockers (int LeftRockerSpeed,int RightRockerSpeed)
+uint32_t IDS_Cleaning_Move_Rockers (int LeftRockerSpeed,int RightRockerSpeed)
 {
     uint32_t status = OK;
     SaveLeftRockerSpeed = LeftRockerSpeed;
@@ -109,7 +109,7 @@ uint32_t IDS_Cleaning_Center_And_Stop_Rockers (int timeout,callback_fptr callbac
     Report("IDS_Cleaning_Center_And_Stop_Rockers actuator down", __FILE__, __LINE__, timeout, RpWarning,   123456, 0);
 
     return status;
-}*/
+}
 uint32_t IDS_Cleaning_Spray_Cleaning_Solution (int dispenserSpeed,callback_fptr callback)
 {
     uint32_t status = OK;
@@ -128,10 +128,11 @@ uint32_t IDS_Cleaning_Stop_Cleaning_Solution (callback_fptr callback)
     uint32_t status = OK;
     status = IDS_Dispenser_Close_Valve_And_Stop_Motor(CLEANER_DISPENSER,callback);
     Report("IDS_Cleaning_Stop_Cleaning_Solution", __FILE__, __LINE__, CLEANER_DISPENSER, RpWarning,   status, 0);
-    HeadCard_Actuators_Relocate();
-    CleaningStageCounter = 0;
-    CleaningStage = CleaningStageIdle;
-    Report("IDS_Cleaning_Stop_Cleaning_Solution actuator relocate", __FILE__, __LINE__, CleaningStage, RpWarning,   CleaningStageCounter, 0);
+    if(Head_Type == HEAD_TYPE_FLAT)
+    {
+        Trigger_Head_Actuators_Control(ACTIN, LOW,false);
+        Report("IDS_Cleaning_MoveDown cleaning stop", __FILE__, __LINE__, Tdelay1, RpWarning,   CleaningStageCounter, 0);
+    }
 
     return status;
 
diff --git a/Software/Embedded_SW/Embedded/Modules/Stubs_Handler/Progress.c b/Software/Embedded_SW/Embedded/Modules/Stubs_Handler/Progress.c
index e14053ae3..f61eebfa8 100644
--- a/Software/Embedded_SW/Embedded/Modules/Stubs_Handler/Progress.c
+++ b/Software/Embedded_SW/Embedded/Modules/Stubs_Handler/Progress.c
@@ -87,6 +87,13 @@ void Stub_ProgressRequest(MessageContainer* requestContainer)
 
     uint8_t ReadBackReg[1];
 
+
+    if(request->amount == 0xacc1e)
+        {
+            response.progress = IDS_Cleaning_Move_Actuators();
+            response.has_progress = true;
+        }
+        else
     if(request->amount == 0xC04f)
     {
 
diff --git a/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c b/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c
index 01c70d42f..b81c2e602 100644
--- a/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c
+++ b/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c
@@ -209,7 +209,7 @@
         }
         else
         {
-            if(Head_Type > HEAD_TYPE_SYLKO_WITHOUT_CARD)
+            if(Head_Type > HEAD_TYPE_FLAT_WITHOUT_CARD)
             {
                 WHS_Set_SetPoint_Q_value(headairflow*2/3);
             }
@@ -349,7 +349,7 @@
         //HARDWARE_MOTOR_TYPE__MOTO_DH_LID = 2,
         //HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID = 4,
         //DeActivateHeadMagnet();
-        if (Head_Type != HEAD_TYPE_STAPLE_SPUN)
+        if (Head_Type != HEAD_TYPE_ARC)
         {
             CallbackCounter++;
             MotorMovetoLimitSwitch (HARDWARE_MOTOR_TYPE__MOTO_DH_LID,1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DH_LID].directionthreadwize, 200,  Motor_Id_to_LS_IdUp[HARDWARE_MOTOR_TYPE__MOTO_DH_LID], Thread_Load_HomingCallback,10000);
@@ -366,7 +366,7 @@
             direction = DRIER_LID_OPEN;
         }
         MotorGotoWithCallback(HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID, direction, Motor_Id_to_LS_IdUp[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID], Thread_Load_HomingCallback,10000);
-        if (Head_Type == HEAD_TYPE_SYLKO)
+        if (Head_Type == HEAD_TYPE_FLAT)
         {
             Report("Thread_Load_Lift_actuators",__FILE__,__LINE__,LOW,RpMessage,false,0);
             Trigger_Head_Actuators_Control(ACTOT, LOW,true);
@@ -500,7 +500,7 @@
         //Close Dyeing Head Cover And Dryer Lid
         //HARDWARE_MOTOR_TYPE__MOTO_DH_LID = 2,
         //HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID = 4,
-        if (Head_Type != HEAD_TYPE_STAPLE_SPUN)
+        if (Head_Type != HEAD_TYPE_ARC)
         {
             CallbackCounter++;
             MotorMovetoLimitSwitch (HARDWARE_MOTOR_TYPE__MOTO_DH_LID,MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DH_LID].directionthreadwize, 200,  Motor_Id_to_LS_IdDown[HARDWARE_MOTOR_TYPE__MOTO_DH_LID], Thread_Load_HomingCallback,10000);
@@ -517,7 +517,7 @@
             direction = DRIER_LID_CLOSE;
         }
         MotorGotoWithCallback(HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID, direction, Motor_Id_to_LS_IdDown[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID], Thread_Load_HomingCallback,10000);
-        if (Head_Type == HEAD_TYPE_SYLKO)
+        if (Head_Type == HEAD_TYPE_FLAT)
         {
             Report("Thread_Load_Close_actuators",__FILE__,__LINE__,LOW,RpMessage,true,0);
             Trigger_Head_Actuators_Control(ACTOT, LOW,false);
diff --git a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_print.c b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_print.c
index f403eeeab..09ab89f24 100644
--- a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_print.c
+++ b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_print.c
@@ -1037,7 +1037,7 @@ uint32_t ThreadPrepareState(void *JobDetails)
 //    if ((FPGA_Read_limit_Switches(Motor_Id_to_LS_IdUp[HARDWARE_MOTOR_TYPE__MOTO_DH_LID]) == LIMIT)&&(JoggingJobActive == false))
     if ((FPGA_Read_limit_Switches(Motor_Id_to_LS_IdDown[HARDWARE_MOTOR_TYPE__MOTO_DH_LID]) != LIMIT)&&(JoggingJobActive == false))
     {
-        if(Head_Type != HEAD_TYPE_STAPLE_SPUN)
+        if(Head_Type != HEAD_TYPE_ARC)
         {
             ReportWithPackageFilter(ThreadFilter,"Dyeing head is wide open!!!",__FILE__,__LINE__,HARDWARE_MOTOR_TYPE__MOTO_DH_LID,RpError,LIMIT,0);
             if (SkipOpenLids == false)