global progress counter, some minor corrections

5 files changed, 9 insertions, 9 deletions

diff --git a/Software/Embedded_SW/Embedded/Modules/Heaters/Heaters_init.c b/Software/Embedded_SW/Embedded/Modules/Heaters/Heaters_init.c
index 047500c19..452643ed3 100644
--- a/Software/Embedded_SW/Embedded/Modules/Heaters/Heaters_init.c
+++ b/Software/Embedded_SW/Embedded/Modules/Heaters/Heaters_init.c
@@ -351,7 +351,7 @@ uint32_t HeaterRecalculateSharedHeatersParams(uint32_t deviceId, uint32_t new_ou
    Heater1000Slices = HeaterControl[HARDWARE_PID_CONTROL_TYPE__DryerHeater1000w].outputproportionalpowerlimit * NumberOFSlicesInUse / 100;
    Heater200aSlices = HeaterControl[HARDWARE_PID_CONTROL_TYPE__DryerHeater200w1].outputproportionalpowerlimit * NumberOFSlicesInUse / 100;
 
-#warning temporary disable time slice control as we are working with one heater in run time
+//#warning temporary disable time slice control as we are working with one heater in run time
 /*   if ((Heater1000Slices + Heater200aSlices +2)>NumberOFSlicesInUse)
    {
        LOG_ERROR (NumberOFSlicesInUse, "proportional time slices too high too high");
diff --git a/Software/Embedded_SW/Embedded/Modules/Heaters/Heaters_print.c b/Software/Embedded_SW/Embedded/Modules/Heaters/Heaters_print.c
index fd828ddb2..e18884ccd 100644
--- a/Software/Embedded_SW/Embedded/Modules/Heaters/Heaters_print.c
+++ b/Software/Embedded_SW/Embedded/Modules/Heaters/Heaters_print.c
@@ -46,7 +46,7 @@ HeaterCommand          HeaterCmd[MAX_HEATERS_NUM];
 uint32_t    ControlIdtoHeaterId [MAX_HEATERS_NUM] = {0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF};
 uint32_t    DryerHeaterMaxTempControl = 0xFF;
 #warning the PT100 id for the dryer control is number2 - dryer internal ambient sensor.
-#warning the PT100 for head 4 is number 5
+
 uint32_t HeaterId2PT100Id[MAX_HEATERS_NUM] = {TEMP_SENSE_ANALOG_DRYER_TEMP2,TEMP_SENSE_ANALOG_DRYER_TEMP1,TEMP_SENSE_ANALOG_DRYER_TEMP3,TEMP_SENSE_ANALOG_DYEINGH_TEMP1,TEMP_SENSE_ANALOG_DYEINGH_TEMP2,TEMP_SENSE_ANALOG_DYEINGH_TEMP3,TEMP_SENSE_ANALOG_DYEINGH_TEMP4,TEMP_SENSE_ANALOG_DYEINGH_TEMP5,TEMP_SENSE_ANALOG_MIXCHIP_TEMP,TEMP_SENSE_ANALOG_MIXCHIP_TEMP};
 uint32_t    DryerInternalPT100Id = TEMP_SENSE_ANALOG_DRYER_TEMP3;
 bool HeatersRestart = false;
diff --git a/Software/Embedded_SW/Embedded/Modules/IDS/IDS_print.c b/Software/Embedded_SW/Embedded/Modules/IDS/IDS_print.c
index e3c5a5c6f..af3005a18 100644
--- a/Software/Embedded_SW/Embedded/Modules/IDS/IDS_print.c
+++ b/Software/Embedded_SW/Embedded/Modules/IDS/IDS_print.c
@@ -134,7 +134,6 @@ void DispenserPrepareReady(void)
             DispenserControlConfig[Motor_i].m_SetParam = 0;//need to update SetParams on presegment stage
 
             MotorSetDirection((TimerMotors_t)HW_Motor_Id,MotorsCfg[HW_Motor_Id].directionthreadwize); //set the dispenser to the
-#warning activate valve
             /*Start the dispensers to build initial pressure
              * check different handling for dispensers that participate in the first segment and idle dispensers
              * start control for initial pressure
diff --git a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_Winder.c b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_Winder.c
index a8ca46574..0ec10a072 100644
--- a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_Winder.c
+++ b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_Winder.c
@@ -183,7 +183,7 @@ uint32_t CalculateNumberOfSteps (uint32_t Counter, bool direction)
 
         }
     }
-    return CalculateNumberOfSteps;
+    return NumberOfSteps;
 
 }
 uint32_t ScrewDirectionChange(uint32_t deviceID, uint32_t BusyFlag)
@@ -225,7 +225,7 @@ uint32_t WinderPresegmentReady(uint32_t deviceID, uint32_t ReadValue)
 
 uint32_t Winder_Presegment(void *JobDetails, uint32_t SegmentId)
 {
-    JobTicket* JobTicket = JobDetails;
+    //JobTicket* JobTicket = JobDetails;
     float screw_speed = 0;
     float RotationsPerSecond;
 
@@ -280,18 +280,18 @@ uint32_t Winder_End(void)
 }
 void Winder_ScrewHomeLimitSwitchInterrupt(void)
 {
-    uint32_t status;
+    //uint32_t status;
     //handle glitch - send information to the next time that the motor stops
     if  (Winder_ScrewHoming)
     {
         MotorStop(HARDWARE_MOTOR_TYPE__MOTO_SCREW,Hard_Hiz); //stop ASAP
     }
-    status = MotorSetDirection(HARDWARE_MOTOR_TYPE__MOTO_SCREW,MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_SCREW].directionthreadwize);//make sure to move the cart out
+    MotorSetDirection(HARDWARE_MOTOR_TYPE__MOTO_SCREW,MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_SCREW].directionthreadwize);//make sure to move the cart out
 }
 void Winder_ScrewOutLimitSwitchInterrupt(void)
 {
     //handle glitch - send information to the next time that the motor stops
-    uint32_t status;
-    status = MotorSetDirection(HARDWARE_MOTOR_TYPE__MOTO_SCREW,1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_SCREW].directionthreadwize);//make sure to move the cart out
+    //uint32_t status;
+    MotorSetDirection(HARDWARE_MOTOR_TYPE__MOTO_SCREW,1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_SCREW].directionthreadwize);//make sure to move the cart out
 }
 
diff --git a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_ex.h b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_ex.h
index 56e88204f..df88da8c8 100644
--- a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_ex.h
+++ b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_ex.h
@@ -11,6 +11,7 @@
 #define FEEDER_DANCER HARDWARE_DANCER_TYPE__RightDancer
 #define NUM_OF_DANCERS HARDWARE_DANCER_TYPE__RightDancer+1
 //} DANCER_ENUM;
+extern double TotalProcessedLength;
 
 uint32_t InternalWindingConfigMessage(JobSpool* request);