fix head identification; remove adc interrupt

8 files changed, 159 insertions, 83 deletions

diff --git a/Software/Embedded_SW/Embedded/Common/SWUpdate/FileSystem.c b/Software/Embedded_SW/Embedded/Common/SWUpdate/FileSystem.c
index 84d8fa725..794ef6d37 100644
--- a/Software/Embedded_SW/Embedded/Common/SWUpdate/FileSystem.c
+++ b/Software/Embedded_SW/Embedded/Common/SWUpdate/FileSystem.c
@@ -177,7 +177,7 @@ uint32_t    FileChunkUploadRequestFunc(MessageContainer* requestContainer)
     if (ReceivedFileHandle==NULL)
     {
         Fresult = FR_DENIED;
-        Report("file chunk uplad rejected - file not created", __FILE__, __LINE__, 4, RpWarning,   (int)0, 0);
+        Report("file chunk upload rejected - file not created", __FILE__, __LINE__, 4, RpWarning,   (int)0, 0);
         FileDone = true;
     }
     else
diff --git a/Software/Embedded_SW/Embedded/Drivers/ADC_Sampling/ADC.c b/Software/Embedded_SW/Embedded/Drivers/ADC_Sampling/ADC.c
index f495758ec..627ad45b9 100644
--- a/Software/Embedded_SW/Embedded/Drivers/ADC_Sampling/ADC.c
+++ b/Software/Embedded_SW/Embedded/Drivers/ADC_Sampling/ADC.c
@@ -349,7 +349,7 @@ void ADCAcquireInit(void) // (called by MillisecInit)
     ADCReferenceSet(ADC0_BASE, ADC_REF_EXT_3V);
     ADCReferenceSet(ADC1_BASE, ADC_REF_EXT_3V);
 
-    VOCAlarmsInit();
+    //VOCAlarmsInit();
     if (!isInitialized)
     {
         // Create a periodic Clock Instance with _period - triggers the ADC sampling
@@ -391,7 +391,7 @@ void ADCAcquireStart(ProcessCallback _callback, uint32_t _period) // (called by
     MAP_ADCIntClear(ADC1_BASE, 0);
     MAP_ADCIntEnable(ADC0_BASE, 0);
     MAP_ADCIntEnable(ADC0_BASE, 1);
-    ROM_IntEnable(INT_ADC0SS0);
+    //ROM_IntEnable(INT_ADC0SS0);
 
     // Store process
     processCallBack = _callback;
diff --git a/Software/Embedded_SW/Embedded/Drivers/I2C_Communication/Head_Card/EEPROM/Head_EEPROM.c b/Software/Embedded_SW/Embedded/Drivers/I2C_Communication/Head_Card/EEPROM/Head_EEPROM.c
index d55e1f617..603c13ad0 100644
--- a/Software/Embedded_SW/Embedded/Drivers/I2C_Communication/Head_Card/EEPROM/Head_EEPROM.c
+++ b/Software/Embedded_SW/Embedded/Drivers/I2C_Communication/Head_Card/EEPROM/Head_EEPROM.c
@@ -117,7 +117,7 @@ uint32_t Check_Head_Type_Via_EEPROM()
 
 #ifndef EVALUATION_BOARD
 
-    if(Head_i2c_status == I2C_MASTER_ERR_ADDR_ACK)
+    if((Head_i2c_status == I2C_MASTER_ERR_ADDR_ACK)||(status == 0xFF))
     {
         Head_Type = HEAD_TYPE_SYLKO_WITHOUT_CARD;
     }
diff --git a/Software/Embedded_SW/Embedded/Embedded.cfg b/Software/Embedded_SW/Embedded/Embedded.cfg
index fe3d71979..666d9f9b3 100644
--- a/Software/Embedded_SW/Embedded/Embedded.cfg
+++ b/Software/Embedded_SW/Embedded/Embedded.cfg
@@ -26,9 +26,10 @@ BIOS.heapSize = 60000;   // bios heapmem
 
 Clock.timerId = 7;
 
-var hwi0Params = new Hwi.Params();
-hwi0Params.instance.name = "adcHwi";
-Program.global.adcHwi = Hwi.create(30, "&ADC0SS0Handler", hwi0Params);
+//var hwi0Params = new Hwi.Params();
+//hwi0Params.instance.name = "adcHwi";
+//Program.global.adcHwi = Hwi.create(30, "&ADC0SS0Handler", hwi0Params);
+
 var hwi1Params = new Hwi.Params();
 hwi1Params.instance.name = "sysTick";
 Program.global.sysTick = Hwi.create(15, "&SysTickHandler", hwi1Params);
diff --git a/Software/Embedded_SW/Embedded/Modules/Control/MillisecTask.c b/Software/Embedded_SW/Embedded/Modules/Control/MillisecTask.c
index d334c9001..9609e445e 100644
--- a/Software/Embedded_SW/Embedded/Modules/Control/MillisecTask.c
+++ b/Software/Embedded_SW/Embedded/Modules/Control/MillisecTask.c
@@ -626,6 +626,10 @@ uint32_t MillisecLowLoop(uint32_t tick)
         Trigger_HeaterWriting();
 
     }
+    if (m20msecTick)
+    {
+        ADC0SS0Handler();
+    }
     if(Fifty_msTick)
     {
         WHS_Read_GPI_Registers();
diff --git a/Software/Embedded_SW/Embedded/Modules/Diagnostics/Diagnostics.c b/Software/Embedded_SW/Embedded/Modules/Diagnostics/Diagnostics.c
index 3f9811636..5f6bb6424 100644
--- a/Software/Embedded_SW/Embedded/Modules/Diagnostics/Diagnostics.c
+++ b/Software/Embedded_SW/Embedded/Modules/Diagnostics/Diagnostics.c
@@ -781,6 +781,9 @@ void DiagnosticOneSecCollection(void)
         DiagnosticLoadTemperature(HEATER_TYPE__HeaterZone10, MillisecGetTemperatures(HEAD_PT100_ZONE_10_0X88_1));
         DiagnosticLoadTemperature(HEATER_TYPE__HeaterZone11, MillisecGetTemperatures(HEAD_PT100_ZONE_11_0X8A_0));
         DiagnosticLoadTemperature(HEATER_TYPE__HeaterZone12, MillisecGetTemperatures(HEAD_PT100_ZONE_12_0X8A_1));
+
+        DiagnosticLoadTemperature(HEATER_TYPE__HeadCoverHeater1, MillisecGetTemperatures(HEAD_PT100_AIR_HEATER_2_0X8C_1));
+        DiagnosticLoadTemperature(HEATER_TYPE__HeadCoverHeater2, MillisecGetTemperatures(HEAD_PT100_AIR_HEATER_1_0X8C_0));
     }
     if (Head_Type == HEAD_TYPE_STAPLE_SPUN)
     {
@@ -790,6 +793,8 @@ void DiagnosticOneSecCollection(void)
         DiagnosticLoadTemperature(HEATER_TYPE__HeaterZone3, MillisecGetTemperatures(HEAD_PT100_ZONE_3_0X82_0));
         DiagnosticLoadTemperature(HEATER_TYPE__HeadCoverHeater1, MillisecGetTemperatures(HEAD_PT100_AIR_HEATER_2_0X8C_1));
         DiagnosticLoadTemperature(HEATER_TYPE__HeadCoverHeater2, MillisecGetTemperatures(HEAD_PT100_AIR_HEATER_1_0X8C_0));
+        DiagnosticLoadTemperature(HEATER_TYPE__HeaterZone4, MillisecGetTemperatures(HEAD_PT100_ZONE_4_0X82_1));
+        DiagnosticLoadTemperature(HEATER_TYPE__HeaterZone6, MillisecGetTemperatures(HEAD_PT100_ZONE_6_0X84_1));
     }
     DiagnosticLoadTemperature(HARDWARE_PID_CONTROL_TYPE__DryerAirTemperature, MillisecGetTemperatures(TEMP_SENSE_ANALOG_DRYER_TEMP1));
     DiagnosticLoadTemperature(HARDWARE_PID_CONTROL_TYPE__DryerHeaterMain, MillisecGetTemperatures(TEMP_SENSE_ANALOG_DRYER_TEMP2));
@@ -977,14 +982,23 @@ void SendDiagnostics(void)
         DiagnosticsMonitor.n_headzone10temperature = HeaterCounterIndex[HEATER_TYPE__HeaterZone10];
         DiagnosticsMonitor.n_headzone11temperature = HeaterCounterIndex[HEATER_TYPE__HeaterZone11];
         DiagnosticsMonitor.n_headzone12temperature = HeaterCounterIndex[HEATER_TYPE__HeaterZone12];
+//temporary
+        DiagnosticsMonitor.headcoverheater1temperature = HeaterTemperature[HEATER_TYPE__HeadCoverHeater1];
+        DiagnosticsMonitor.headcoverheater2temperature = HeaterTemperature[HEATER_TYPE__HeadCoverHeater2];
+        DiagnosticsMonitor.n_headcoverheater1temperature = HeaterCounterIndex[HEATER_TYPE__HeadCoverHeater1];
+        DiagnosticsMonitor.n_headcoverheater2temperature = HeaterCounterIndex[HEATER_TYPE__HeadCoverHeater2];
     }
-    if ((Head_Type == HEAD_TYPE_SYLKO)||(Head_Type == HEAD_TYPE_STAPLE_SPUN))
-//    if (Head_Type == HEAD_TYPE_STAPLE_SPUN)
+    //if ((Head_Type == HEAD_TYPE_SYLKO)||(Head_Type == HEAD_TYPE_STAPLE_SPUN))
+    if (Head_Type == HEAD_TYPE_STAPLE_SPUN)
     {
         DiagnosticsMonitor.headcoverheater1temperature = HeaterTemperature[HEATER_TYPE__HeadCoverHeater1];
         DiagnosticsMonitor.headcoverheater2temperature = HeaterTemperature[HEATER_TYPE__HeadCoverHeater2];
         DiagnosticsMonitor.n_headcoverheater1temperature = HeaterCounterIndex[HEATER_TYPE__HeadCoverHeater1];
         DiagnosticsMonitor.n_headcoverheater2temperature = HeaterCounterIndex[HEATER_TYPE__HeadCoverHeater2];
+        DiagnosticsMonitor.headzone4temperature = HeaterTemperature[HEATER_TYPE__HeaterZone4];
+        DiagnosticsMonitor.headzone6temperature = HeaterTemperature[HEATER_TYPE__HeaterZone6];
+        DiagnosticsMonitor.n_headzone4temperature = HeaterCounterIndex[HEATER_TYPE__HeaterZone4];
+        DiagnosticsMonitor.n_headzone6temperature = HeaterCounterIndex[HEATER_TYPE__HeaterZone6];
     }
     DiagnosticsMonitor.dryerzone1temperature = HeaterTemperature[HEATER_TYPE__DryerAirHeater];
     DiagnosticsMonitor.dryerzone2temperature = HeaterTemperature[HEATER_TYPE__DryerMainHeater];
diff --git a/Software/Embedded_SW/Embedded/Modules/Diagnostics/DiagnosticsHoming.c b/Software/Embedded_SW/Embedded/Modules/Diagnostics/DiagnosticsHoming.c
index d81ab7abb..3b010247d 100644
--- a/Software/Embedded_SW/Embedded/Modules/Diagnostics/DiagnosticsHoming.c
+++ b/Software/Embedded_SW/Embedded/Modules/Diagnostics/DiagnosticsHoming.c
@@ -30,6 +30,7 @@
 #include "drivers/Valves/Valve.h"
 #include "Drivers/I2C_Communication/DAC/blower.h"
 #include "drivers/Flash_ram/MCU_E2Prom.h"
+#include <Drivers/SSI_Comm/Dancer/Dancer.h>
 
 #include "ids/ids_ex.h"
 #include "General/process.h"
@@ -40,6 +41,9 @@ char HomingToken[NUM_OF_MOTORS][36+1]={0};
 int HomingCounter[NUM_OF_MOTORS];
 uint32_t HomingControlId[NUM_OF_MOTORS];
 
+uint32_t Diagnostics_Dryer_UnLoading(void);
+uint32_t Diagnostics_Dryer_Loading(void);
+
 /********************************************************************************
  * Motor Homing
  ********************************************************************************/
@@ -119,61 +123,9 @@ uint32_t D_numberOfSteps = 0;
 float D_numberOfCycles = 0;
 double D_DrierPrevLocation = 0;
 
-uint32_t Diagnostics_Set_Load_Arm_To_Stopper_Callback(uint32_t deviceID, uint32_t BusyFlag)
-{
-    Report("Diagnostics_Set_Load_Arm_To_Stopper_Callback",__FILE__,__LINE__,D_numberOfCycles,RpMessage,0,0);
-    //storeLoadArmParameters();
-
-    SetMotHome(HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM);  //set this point as the spool home
-    if (HomingControlId[deviceID] != 0xff)
-    {
-        Report("MotorHomingProgressReport stopped",__FILE__,__LINE__,deviceID,RpMessage,HomingCounter[deviceID],0);
-        RemoveControlCallback(HomingControlId[deviceID],MotorHomingProgressReport);
-        HomingControlId[deviceID] = 0xff;
-    }
-    return OK;
-}
-
-uint32_t Diagnostics_Dryer_UnLoading_Callback(uint32_t MotorId, uint32_t ReadValue)
-{
-    D_numberOfCycles++;
-    uint32_t temp = Read_Dryer_ENC_Position();
-    Report("Thread_Load_Dryer_UnLoading_Callback",__FILE__,ReadValue,temp,RpMessage,D_DrierPrevLocation,0);
-    //Report("Thread_Load_Dryer_UnLoading_Callback details",__FILE__,(int)(TotalLoadedLen),D_numberOfCycles,RpMessage,CallbackCounter,0);
-    if ((abs (temp -D_DrierPrevLocation)>1000  )&&(ReadValue == NOTBUSY)) // OK - take another round
-    {
-        D_DrierPrevLocation = temp;
-        Report("Thread_Load_Dryer_UnLoading cycles",__FILE__,D_numberOfCycles,LoadArmRounds,RpMessage,0,0);
-        if (D_numberOfCycles<LoadArmRounds)
-        {
-            MotorMoveWithCallback (HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM, 1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].directionthreadwize,
-                                   D_numberOfSteps,    Diagnostics_Dryer_UnLoading_Callback, 10000);
-        }
-        else //done enough cycles, go to the center point
-        {
-            MotorMovetoEncoderPosition(HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM,Diagnostics_Set_Load_Arm_To_Stopper_Callback,30000);
-            MCU_E2PromProgram(EEPROM_STORAGE_DRYER_CYCLES,LoadArmRounds-D_numberOfCycles);
-            Report("Store Number of cycles in drier",__FILE__,__LINE__,D_numberOfCycles,RpMessage,LoadArmRounds,0);
-        }
-    }
-    else  //timeout or no movement
-    {
-        Report("Store Number of cycles in drier - halted",__FILE__,__LINE__,D_numberOfCycles,RpMessage,LoadArmRounds,0);
-        MCU_E2PromProgram(EEPROM_STORAGE_DRYER_CYCLES,LoadArmRounds-(D_numberOfCycles-2));//it takes two cycles to identify a stop of the arm
-        Report("Drier unloading timeout(1) or no movement",__FILE__,temp,D_DrierPrevLocation,RpWarning,ReadValue,0);
-        if (HomingControlId[MotorId] != 0xff)
-        {
-            Report("MotorHomingProgressReport stopped",__FILE__,__LINE__,MotorId,RpMessage,HomingCounter[MotorId],0);
-            RemoveControlCallback(HomingControlId[MotorId],MotorHomingProgressReport);
-            HomingControlId[MotorId] = 0xff;
-        }
-    }
-    return OK;
-}
 
 uint32_t MotorHomingRequestFunc(MessageContainer* requestContainer)
 {
-    //uint32_t numberOfSteps = 0;
     uint32_t status = FAILED;
     MessageContainer responseContainer;
 
@@ -215,16 +167,7 @@ uint32_t MotorHomingRequestFunc(MessageContainer* requestContainer)
                 {
                     if(MotorId == HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM)
                     {
-                        D_numberOfSteps = MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].pulseperround*LoadArmRounds*MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].microstep*MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].pulleyradius;
-                        Report("MotorHomingRequestFunc Set_Load_Arm_To_Start_Position",__FILE__,__LINE__,D_numberOfSteps,RpMessage,LoadArmRounds,0);
-                        //MotorMoveToStopper(HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM, (1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].directionthreadwize),
-                        //                                MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].pulseperround/2, MotorHomingRequestCallback,0,1000);
-                        MotorMoveWithCallback (HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM, 1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].directionthreadwize,
-                                               D_numberOfSteps-800,    Diagnostics_Dryer_UnLoading_Callback, 10000);
-                        D_numberOfCycles = 0;
-
-                        //MotorMoveWithCallback(HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM, (1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].directionthreadwize),
-                        //                                D_numberOfSteps, MotorHomingRequestCallback,1000);
+                        Diagnostics_Dryer_UnLoading();
                         status = OK;
                     }
                     if ( Motor_Id_to_LS_IdDown[MotorId] != MAX_GPI)
@@ -265,18 +208,7 @@ uint32_t MotorHomingRequestFunc(MessageContainer* requestContainer)
                 {
                     if(MotorId == HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM)
                     {
-                        if (LoadArmRounds <= 2)
-                                LoadArmRounds = 30;
-
-                        D_numberOfSteps = MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].pulseperround*LoadArmRounds*MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].microstep*MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].pulleyradius;
-                        D_numberOfSteps -= 100;
-                        D_numberOfCycles = LoadArmRounds;
-                        Report("MotorHomingRequestFunc Set_Load_Arm_To_Start_Position",__FILE__,__LINE__,D_numberOfSteps,RpMessage,LoadArmRounds,0);
-
-                        MotorSetMaxSpeed (HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM, MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].pulseperround/4);
-
-                        MotorMoveWithCallback (HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM, MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].directionthreadwize,
-                                               D_numberOfSteps,    MotorHomingRequestCallback, 100000);
+                        Diagnostics_Dryer_Loading();
                         status = OK;
                     }
                     if ( Motor_Id_to_LS_IdUp[MotorId] != MAX_GPI)
@@ -486,4 +418,128 @@ uint32_t DispenserAbortHomingRequestFunc(MessageContainer* requestContainer)
 
 return OK;
 }
+uint32_t Diagnostics_Set_Load_Arm_To_Stopper_Callback(uint32_t deviceID, uint32_t BusyFlag)
+{
+
+    Report("Diagnostics_Set_Load_Arm_To_Stopper time",__FILE__,__LINE__,msec_millisecondCounter,RpMessage,0,0);
+
+    //NumberOfDrierLoaderCycles=0;
+    //storeLoadArmParameters();
+    SetMotHome(HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM);  //set this point as the spool home
+
+    return OK;
+}
+
+uint32_t Diagnostics_Dryer_UnLoading_Callback(uint32_t MotorId, uint32_t ReadValue)
+{
+    D_numberOfCycles++;
+    uint32_t temp = Read_Dryer_ENC_Position();
+    Report("Diagnostics_Dryer_UnLoading_Callback",__FILE__,ReadValue,temp,RpMessage,D_DrierPrevLocation,0);
+    //Report("Diagnostics_Dryer_UnLoading_Callback details",__FILE__,(int)(TotalLoadedLen),D_numberOfCycles,RpMessage,CallbackCounter,0);
+    if (ReadValue == NOTBUSY) // OK - take another round
+    {
+        D_DrierPrevLocation = temp;
+        Report("Diagnostics_Dryer_UnLoading cycles",__FILE__,D_numberOfCycles,LoadArmRounds,RpMessage,0,0);
+        if (D_numberOfCycles<LoadArmRounds)
+        {
+            MotorMoveWithCallback (HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM, 1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].directionthreadwize,
+                                   D_numberOfSteps,    Diagnostics_Dryer_UnLoading_Callback, 10000);
+        }
+        else //done enough cycles, go to the center point
+        {
+            MotorMovetoEncoderPosition(HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM,Diagnostics_Set_Load_Arm_To_Stopper_Callback,15000);
+            MCU_E2PromProgram(EEPROM_STORAGE_DRYER_CYCLES,LoadArmRounds-D_numberOfCycles);
+            Report("Store Number of cycles in drier",__FILE__,__LINE__,D_numberOfCycles,RpMessage,LoadArmRounds,0);
+        }
+    }
+    else  //timeout or no movement
+    {
+        Report("Store Number of cycles in drier - halted",__FILE__,__LINE__,D_numberOfCycles,RpMessage,LoadArmRounds,0);
+        MCU_E2PromProgram(EEPROM_STORAGE_DRYER_CYCLES,LoadArmRounds-(D_numberOfCycles-2));//it takes two cycles to identify a stop of the arm
+
+        Report("Drier unloading timeout(1) or no movement",__FILE__,temp,D_DrierPrevLocation,RpWarning,ReadValue,0);
+    }
+    return OK;
+}
+uint32_t Diagnostics_Dryer_UnLoading(void)
+{
+    uint32_t temp;
+
+    D_numberOfSteps = MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].pulseperround/**LoadArmRounds*/*MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].microstep*MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].pulleyradius;
+    D_numberOfCycles = 0;
+
+    MCU_E2PromRead(EEPROM_STORAGE_DRYER_CYCLES,&LoadArmRounds);
+    if (LoadArmRounds == 0) //prev trial stopped
+    {
+        LoadArmRounds = (int)dryerbufferlength;
+    }
+    if (LoadArmRounds <= 2)
+        MCU_E2PromRead(EEPROM_STORAGE_DRYER_CYCLES,&LoadArmRounds);
+
+    MCU_E2PromRead(EEPROM_STORAGE_DRYER_CENTER,&temp);
+    D_DrierPrevLocation = temp;
+    Report("Diagnostics_Set_Load_Arm_To_Start_Position",__FILE__,__LINE__,D_DrierPrevLocation,RpMessage, LoadArmRounds,0);
+    MotorSetMaxSpeed (HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM, MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].pulseperround/6*MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].pulleyradius);
+//        status |= MotorMoveToStopper(HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM, (1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].directionthreadwize),
+//                                        MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].pulseperround/4, Diagnostics_Set_Load_Arm_To_Stopper_Callback,0,1000);
+    MotorMoveWithCallback (HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM, 1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].directionthreadwize,
+                           D_numberOfSteps-800,    Diagnostics_Dryer_UnLoading_Callback, 10000);
+
+    return OK;
+}
+uint32_t Diagnostics_Dryer_MovetoEncoderPosition_Callback(uint32_t MotorId, uint32_t ReadValue)
+{
+    //Report("Diagnostics_Dryer_MovetoEncoderPosition_Callback",__FILE__,__LINE__,0,RpMessage,CallbackCounter,0);
+    MotorSetMaxSpeed (HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM, 200);
+
+    return OK;
+}
+
+uint32_t Diagnostics_Dryer_Loading_Callback(uint32_t MotorId, uint32_t ReadValue)
+{
+    D_numberOfCycles++;
+
+    Report("Diagnostics_Dryer_Loading_Callback",__FILE__,(int)D_numberOfCycles,(int)D_DrierPrevLocation,RpMessage,ReadValue,0);
+
+    if (ReadValue == NOTBUSY)
+    {
+        //Report("Diagnostics_Dryer_Loading_Callback",__FILE__,__LINE__,LoadStages,RpMessage,NumberOfDrierLoaderCycles,0);
+        //Report("Diagnostics_Dryer_Loading_Callback details",__FILE__,(int)(TotalLoadedLen),numberOfCycles,RpMessage,CallbackCounter,0);
+        if (D_numberOfCycles<LoadArmRounds)
+        {
+            MotorMoveWithCallback (HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM, MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].directionthreadwize,
+                                   D_numberOfSteps,    Diagnostics_Dryer_Loading_Callback, 10000);
+        }
+        else
+        {
+            MotorMovetoEncoderPosition(HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM,Diagnostics_Dryer_MovetoEncoderPosition_Callback,15000);
+            MCU_E2PromProgram(EEPROM_STORAGE_DRYER_CYCLES,D_numberOfCycles);
+            Report("Store Number of cycles in drier",__FILE__,__LINE__,D_numberOfCycles,RpMessage,LoadArmRounds,0);
+        }
+    }
+    else
+    {
+        Report("Store Number of cycles in drier - halted",__FILE__,__LINE__,D_numberOfCycles,RpMessage,LoadArmRounds,0);
+        MCU_E2PromProgram(EEPROM_STORAGE_DRYER_CYCLES,D_numberOfCycles);
+        MotorSetMaxSpeed (HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM, 200);
+    }
+    return OK;
+}
+
+uint32_t Diagnostics_Dryer_Loading(void)
+{
+    if (dryerbufferlength)
+        LoadArmRounds = (int)dryerbufferlength;
+    MCU_E2PromRead(EEPROM_STORAGE_DRYER_CENTER,&D_DrierPrevLocation);
+    D_numberOfCycles = 0;
+    D_numberOfSteps = MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].pulseperround/**LoadArmRounds*/*MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].microstep*MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].pulleyradius;
+
+    MotorSetMaxSpeed (HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM, MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].pulseperround/6*MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].pulleyradius);
+    //6 seconds per round
+
+    //SetMotHome(ThreadMotorIdToMotorId[Motor_i]);
+    MotorMoveWithCallback (HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM, MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM].directionthreadwize,
+                           D_numberOfSteps-800,    Diagnostics_Dryer_Loading_Callback, 10000);
+    return OK;
+}
 
diff --git a/Software/Embedded_SW/Embedded/StateMachines/Initialization/PowerIdle.c b/Software/Embedded_SW/Embedded/StateMachines/Initialization/PowerIdle.c
index 402db9d1e..69df1c183 100644
--- a/Software/Embedded_SW/Embedded/StateMachines/Initialization/PowerIdle.c
+++ b/Software/Embedded_SW/Embedded/StateMachines/Initialization/PowerIdle.c
@@ -93,6 +93,7 @@ void PowerIdleSetIdle(void)
     ProcessParametersClear.headzone11temp  = (ActiveProcessParameters.headzone11temp <80)? ActiveProcessParameters.headzone11temp  :IdleHeadTemperature;
     ProcessParametersClear.headzone12temp  = (ActiveProcessParameters.headzone12temp <80)? ActiveProcessParameters.headzone12temp  :IdleHeadTemperature;
     ProcessParametersClear.dyeingspeed    = (ActiveProcessParameters.dyeingspeed   <40)? ActiveProcessParameters.dyeingspeed    :IdleHeadTemperature;
+    ProcessParametersClear.dryerbufferlength    = (ActiveProcessParameters.dryerbufferlength   <30)? ActiveProcessParameters.dryerbufferlength    :30;
     ProcessParametersClear.rblowertemp  = (ActiveProcessParameters.rblowertemp <80)? ActiveProcessParameters.rblowertemp  :IdleHeadTemperature;
     ProcessParametersClear.lblowertemp  = (ActiveProcessParameters.lblowertemp <80)? ActiveProcessParameters.lblowertemp  :IdleHeadTemperature;
     ProcessParametersClear.rblowerflow  = (ActiveProcessParameters.rblowerflow <96)? ActiveProcessParameters.rblowerflow  :96;