Update BTSR + commenet the define USE_UART4_FOR_BTSR (need changes in FPGA_1+ jumpers in main board )

2 files changed, 166 insertions, 3 deletions

diff --git a/Software/Embedded_SW/Embedded/DataDef.h b/Software/Embedded_SW/Embedded/DataDef.h
index 1bed505f2..001303c88 100644
--- a/Software/Embedded_SW/Embedded/DataDef.h
+++ b/Software/Embedded_SW/Embedded/DataDef.h
@@ -20,7 +20,7 @@
 #define NO_INITIAL_HEATING
 #define MAX_STRING_LEN              255 //Embedded  version + filter.c
 
-//#define WATCHDOG
+#define WATCHDOG
 //#define DISPESER_TEST
 //#define FPGA_WATCHDOG_DISABLE
 
@@ -36,7 +36,7 @@
 #endif
 //#define BTSR_ROTATED_WINDER_TFU
 
-#define USE_UART4_FOR_BTSR // need change in FRPGA FPGA_1 yy > 0x20 + jumpers in main board need to read HW Version
+//#define USE_UART4_FOR_BTSR // need change in FRPGA FPGA_1 yy > 0x20 + jumpers in main board need to read HW Version
 
 //#define USE_RFID_STUB //stub only. to use it undef USE_RFID_LOGIC
 //#define RFID_READ_ONLY //
diff --git a/Software/Embedded_SW/Embedded/Drivers/Uart_Comm/BTSR/BTSR.c b/Software/Embedded_SW/Embedded/Drivers/Uart_Comm/BTSR/BTSR.c
index 12699a1fd..92337080d 100644
--- a/Software/Embedded_SW/Embedded/Drivers/Uart_Comm/BTSR/BTSR.c
+++ b/Software/Embedded_SW/Embedded/Drivers/Uart_Comm/BTSR/BTSR.c
@@ -77,7 +77,7 @@ void U4RX()
 
 void uart4_intHandler()
 {
-    static uint8_t nop = 0;
+    //static uint8_t nop = 0;
     //Get interrupt flags
     unsigned long status = UARTIntStatus(UART4_BASE, 1);
 
@@ -626,5 +626,168 @@ uint8_t BTSR_Read_Status(uint8_t BTSR_Id, uint8_t Application, uint8_t Yarn_Type
         return ERROR;
 }
 
+//----------------------------------------------------------------------------------------------------------------
+//----------------------------------------------------------------------------------------------------------------
+//----------------------------------------------------------------------------------------------------------------
 
+//BTSR_ALARM_AND_ENABLING_STATUS_READ
+typedef struct
+{
+    bool D0 : 1;//0
+    bool D1 : 1;//1
+    bool D2 : 1;//2
+    bool D3 : 1;//3
+    bool D4 : 1;//4
+    bool D5 : 1;//5
+    bool D6 : 1;//6
+    bool D7 : 1;//7
+}BITS;
+
+
+typedef union
+{
+    BITS Bit[4];
+    uint8_t Byte[4];
+}BTSR_ALARM_AND_ENABLING_STATUS_READ;
+
+BTSR_ALARM_AND_ENABLING_STATUS_READ BTSR_Status;
+
+void BTSR_Configuration_Set(uint8_t UFeeder_ID)
+{
+    memset(BTSR_TX_Buff, 0, Max_BTSR_TX_Bytes);
+
+    BTSR_TX_Buff[0] = UFeeder_ID;
+    BTSR_TX_Buff[1] = 0x36;
+    BTSR_TX_Buff[2] = 0x80;//CCW
+    BTSR_TX_Buff[3] = 0x01;//YYT OFF, UNICO OFF
+    BTSR_TX_Buff[4] = 0x40;//FLIP DISPLAY
+
+    BTSR_Calculate_CheckSum(BTSR_TX_Buff,18);
+
+    BTSR_Send_Buf(Typology_Set.Buf, 20);
+
+}
+
+void BTSR_Alarm_and_Enabling_Status_Read(uint8_t UFeeder_ID)
+{
+    memset(BTSR_TX_Buff, 0, Max_BTSR_TX_Bytes);
+
+    BTSR_TX_Buff[0] = UFeeder_ID;
+    BTSR_TX_Buff[1] = 0x1C;
+
+    BTSR_Calculate_CheckSum(BTSR_TX_Buff,2);
+
+    BTSR_Send_Buf(Typology_Set.Buf, 4);
+}
+
+typedef enum
+{
+    //BTSR_READ
+    DEVICE_INFORMATION_READ_10               ,
+    ADVANCED_PROGRAMMING_READ_18             ,
+    ADVANCED_TENSION_READ_23                 ,
+    APPLICATION_AND_YARN_TYPOLOGY_READ_28    ,
+    ALARM_AND_ENABLING_STATUS_READ_30        ,
+    PC_LINK_READ_32                          ,
+    METERS_TOTAL_COUNTER_READ_LOW_37         ,
+    METERS_TOTAL_COUNTER_READ_HIGH_39        ,
+    METER_TOTAL_COUNTER_READ_HIGHEST_41      ,
+    MAX_BTSR_READ                            ,
+
+    //BTSR_SET
+    //return 0xFA/0xFB/0xF9
+    DEVICE_CALIBRATION_11                    ,
+    BAUDRATE_SET_13                          ,
+    DISPLAY_LANGUAGE_SET_14                  ,
+    CONFIGURATION_SET_15                     ,
+    ADVANCED_CONFIGURATION_SET_17            ,
+    INPUT_CURRENT_CONTROL_SET_20             ,
+    ADVANCED_TENSION_PROGRAMMING_21          ,
+    ADVANCED_STYLE_LOAD_25                   ,
+    APPLICATION_AND_YARN_TYPOLOGY_SET_27     ,
+    WORK_TENSION_AND_OPERATION_STATUS_SET_29 ,
+    ALARM_STATUS_RESET_35                    ,
+    RESETS_ALL_THE_COUNTERS_36               ,
+    //return device + Function code
+    METERS_TOTAL_COUNTER_RESET_LOW_38        ,
+    METERS_TOTAL_COUNTER_RESET_HIGH_40       ,
+    METERS_TOTAL_COUNTER_RESET_HIGHEST_42    ,
+    MAX_BTSR_SET
+}BTSR_CMD;
+
+#define Get_Set_resp 5
+#define Set_Command 6
+
+#define Get_Read_resp 7
+#define Read_Command 8
+
+BTSR_CMD BTSR_command_Stage[MAX_BTSR_SET];
+
+uint8_t BTSR_State_Machine(uint8_t UFeeder_ID)
+{
+    uint8_t status = OK;
+    uint8_t i;
+
+    for(i = DEVICE_CALIBRATION_11; i < MAX_BTSR_SET; i++)
+    {
+        if(BTSR_command_Stage[i] == Get_Set_resp)
+        {
+            if((i >= DEVICE_CALIBRATION_11) && (i <= RESETS_ALL_THE_COUNTERS_36) /*&& (BTSR_RX_Buff[0] != BTSR_RISP_OK)*/)
+            {
+                    status = ERROR;
+                    BTSR_command_Stage[i] = BTSR_RX_Buff[0];
+                    //print response + command ID
+            }
+            else if(((i == METERS_TOTAL_COUNTER_RESET_LOW_38)     && (BTSR_RX_Buff[1] != 0x06)) ||
+                    ((i == METERS_TOTAL_COUNTER_RESET_HIGH_40)    && (BTSR_RX_Buff[1] != 0x1E)) ||
+                    ((i == METERS_TOTAL_COUNTER_RESET_HIGHEST_42) && (BTSR_RX_Buff[1] != 0x48))   )
+            {
+                    status = ERROR;
+                    BTSR_command_Stage[i] = BTSR_RX_Buff[1];
+                    //print response + command ID
+            }
+            //print response + command ID
+            BTSR_command_Stage[i] = OK;
+        }
+
+        if(BTSR_command_Stage[i] == Set_Command)
+        {
+            if(i == CONFIGURATION_SET_15)
+            {
+                BTSR_Configuration_Set(UFeeder_ID);
+            }
+
+            BTSR_command_Stage[i] = Get_Set_resp;
+            return status;//Only one command in cycle
+        }
+    }
+
+
+    for(i = DEVICE_INFORMATION_READ_10; i < MAX_BTSR_READ; i++)
+    {
+        if(BTSR_command_Stage[i] == Get_Read_resp)
+        {
+            // Add CRC check
+            if(i == ALARM_AND_ENABLING_STATUS_READ_30)
+            {
+                for(i = 0; i < 4; i++)
+                    BTSR_Status.Byte[i] = BTSR_RX_Buff[i];
+            }
+            BTSR_command_Stage[i] = 0;
+        }
+
+        if(BTSR_command_Stage[i] == Read_Command)
+        {
+
+            if(i == ALARM_AND_ENABLING_STATUS_READ_30)
+            {
+                BTSR_Alarm_and_Enabling_Status_Read(UFeeder_ID);
+            }
+            BTSR_command_Stage[i] = Get_Read_resp;
+            return status;//Only one command in cycle
+        }
+    }
+
+        return status;
+}