merge

1 files changed, 0 insertions, 615 deletions

diff --git a/Software/Stubs Collection/stubs/Scripts/Jig_Tester/span.cs b/Software/Stubs Collection/stubs/Scripts/Jig_Tester/span.cs
deleted file mode 100644
index 1b31dbb4e..000000000
--- a/Software/Stubs Collection/stubs/Scripts/Jig_Tester/span.cs
+++ /dev/null
@@ -1,615 +0,0 @@
-using System;
-using System.Text;
-using System.IO;
-using System.Linq;
-using System.Drawing;
-using System.Diagnostics;
-using System.Windows.Forms;
-using System.Threading;
-using System.Threading.Tasks;
-using System.Collections.Generic;
-using Tango.PMR.Stubs;
-using Tango.Stubs;
-
-const	int 	New_DyeHead_UNDER_TEST=47;
-const 	Int32	MGNET_OPEN=0x420301;
-const	Int32	MGNET_EN=0x420280;
-const	Int32	MGNET_CLOSE=0x420300;
-const	Int32	MGNET_DIS=0x420200;
-const	Int32	ACTDIR_ON=0x460280;
-const	Int32	ACTDIR_OFF=0x460200;
-
-const	Int32	ACTIN_ON=0x460308;
-const	Int32	ACTOUT_ON=0x460304;
-
-const	Int32	ACTIN_OFF=0x46030C;
-const	Int32	ACTOUT_OFF=0x46030C;
-
-
-
-const	Int32	LS_FRONT=0X460110;
-const	Int32	LS_REAR=0X460120;
-const	Int32	LS_UPPER=0X460140;
-const	Int32	LS_SPARE=0X460180;
-const	Int32	ACTIN_EN=0X460101;
-const	Int32	ACTOUT_EN=0X460102;
-
-
-
-string EEPROM_Header="Header_1         ";	//16 characters
-
-int Head_Mux_Channel_ID = 4; //Head MUX channel
-
-
-//float [] DyeHeadTemp = new float[6]	;
-
-string [,] Units_status_New_DyeHead = new string[New_DyeHead_UNDER_TEST,2]	{ 
-												{"Pt100_Zone_1","Pass"},		//0
-												{"Pt100_Zone_2","Pass"},		//1
-												{"Pt100_Zone_3","Pass"},		//2
-												{"Pt100_Zone_4","Pass"},		//3
-												{"Pt100_Zone_5","Pass"},		//4
-												{"Pt100_Zone_6","Pass"},		//5
-												{"Pt100_Zone_7","Pass"},		//6
-												{"Pt100_Zone_8","Pass"},		//7
-												{"Pt100_Zone_9","Pass"},		//8
-												{"Pt100_Zone_10","Pass"},		//9
-												{"Pt100_Zone_11","Pass"},		//10
-												{"Pt100_Zone_12","Pass"},		//11
-												
-												{"Current_Zone_1","Pass"},		//12
-												{"Current_Zone_2","Pass"},		//13
-												{"Current_Zone_3","Pass"},		//14
-												{"Current_Zone_4","Pass"},		//15
-												{"Current_Zone_5","Pass"},		//16
-												{"Current_Zone_6","Pass"},		//17
-												{"Current_Zone_7","Pass"},		//18
-												{"Current_Zone_8","Pass"},		//19
-												{"Current_Zone_9","Pass"},		//20
-												{"Current_Zone_10","Pass"},		//21
-												{"Current_Zone_11","Pass"},		//22
-												{"Current_Zone_12","Pass"},		//23
-												
-												{"Break_Zone_1","Pass"},		//24
-												{"Break_Zone_2","Pass"}, 		//25
-												{"Break_Zone_3","Pass"}, 		//26
-												{"Break_Zone_4","Pass"}, 		//27
-												{"Break_Zone_5","Pass"}, 		//28
-												{"Break_Zone_6","Pass"}, 		//29
-												{"Break_Zone_7","Pass"},		//30
-												{"Break_Zone_8","Pass"},		//31
-												{"Break_Zone_9","Pass"},		//32
-												{"Break_Zone_10","Pass"},		//33
-												{"Break_Zone_11","Pass"},		//34
-												{"Break_Zone_12","Pass"},		//35
-												                        
-												{"Magnet      ","Not Test"},	//36
-												{"LS_REAR","Not Test"},     	//37
-												{"LS_FRONT","Not Test"},    	//38
-												{"DH_LID_Motor","Not Test"},	//39
-												
-												{"EEPROM ","Pass"},				//40
-												
-												{"ACTUATOR_IN","Not Test"},			//41
-												{"LS_IN_UP","Not Test"},			//42
-												{"LS_IN_DN","Not Test"},			//43
-												{"ACTUATOR_OUT","Not Test"},		//44
-												{"LS_OUT_UP","Not Test"},			//45
-												{"LS_OUT_DN","Not Test"},			//46
-												
-												
-											};
-
-
-
-//--------------------------------------------------------------------------------
-
-public Task<decimal> NewDyeHead_test( Action<string> settext, CancellationToken cancellationToken, string SN, string Location)
-{
-    Task<decimal> task = null;
-    // Start a task and return it
-    task = Task.Run(() =>
-    {
-	stubManager.Write("S/N:" +SN+ "\n");
-	stubManager.Write("Location:" +Location+ "\n");
-
-	copy_table (New_DyeHead_UNDER_TEST,Units_status_New_DyeHead);
-
-	DialogResult result1 = MessageBox.Show("Make shure, Dyehead is not hot", "Warning",MessageBoxButtons.OKCancel);
-	if(result1 == DialogResult.Cancel)
-		{
-			stubManager.AppendToFile(File_Name1,"Dyehead is too hot \tFail");
-			stubManager.Write("Dyehead is too hot \tFail\n");
-			return 0 ;
-		}
-	else
-	{
-
-//------------------------------- start test -----------
-	settext("Test Magnet Motor LS");
-	Test_Magnet_Motor_LS_New_DyeHead();
-	settext("Test heaters &pt100");
-	Test_heaters_pt100 ();
-	settext("Test Head EEPROM");
-	Test_Head_EEPROM(SN);	
-	settext("Test Actuator In");
-	Test_Actuator_in();
-	settext("Test Actuator Out");
-	Test_Actuator_out();
-	Status=write_to_file(SN,Location,DyeHead_UNDER_TEST,"Dyehead");
-
-	settext("End Test");
-	}
-	decimal result = 0;
-		
-        return result;
-    });
-    return task;
-}
-  
-//------------------------------------------------------------- 
- int Test_Actuator_in()
-{  
-	Int32 temp;
-	int i=0;
-	
-	DialogResult result = MessageBox.Show("Make shure, ACTUATOR-IN is down", "Warning",MessageBoxButtons.OKCancel);
-	if(result == DialogResult.Cancel)
-		{
-			Units_status[41,1]="Fail";
-			stubManager.Write("ACTUATOR-IN is Up\n"); 
-			return 0;
-		}
-//---------------------- move ACTUATOR-IN Up ---------------------------- 
-	stubManager.Run<ProgressResponse>("ProgressRequest" ,0x0EAD,ACTDIR_ON);	// DIR=1
-	stubManager.Run<ProgressResponse>("ProgressRequest" ,0x0EAD,ACTIN_ON);	// act_in enable
-	delay(10);																					
-	stubManager.Run<ProgressResponse>("ProgressRequest" ,0x0EAD,ACTIN_OFF);	// act_in disable
-	stubManager.Write("ACTUATOR-IN  moving Up\n"); 
-
-	temp = 1;
-	 i=0;		
-	while ((temp != 0x0)&& (i<200) )		//wait until Limit Switch or timeout 200*50msec=10sec
-			{	
-					temp=read_pio (ACTIN_EN);	// read ACTIN_EN
-					delay(50);
-					i++;
-			}
-
-	if(i == 200)
-		{
-			Units_status[41,1]="Fail";
-			stubManager.Write("CTUATOR-IN is not moving Up\n");
-			return 0;
-		}
-		
-	DialogResult result2 = MessageBox.Show("Limit Switch calibrate ?", "Warning",MessageBoxButtons.OKCancel);
-	if(result2 == DialogResult.Cancel)
-		{
-			Units_status[42,1]="Fail";
-			stubManager.Write("LS_IN_UP Not calibrate\n");
-			return 0;
-		}
-	Units_status[41,1]="Pass";
-	Units_status[42,1]="Pass";
-//---------------------- move ACTUATOR-IN Dn ---------------------------- 
-	stubManager.Run<ProgressResponse>("ProgressRequest" ,0x0EAD,ACTDIR_OFF);	// DIR=0
-	stubManager.Run<ProgressResponse>("ProgressRequest" ,0x0EAD,ACTIN_ON);	// act_in enable
-	delay(10);																					
-	stubManager.Run<ProgressResponse>("ProgressRequest" ,0x0EAD,ACTIN_OFF);	// act_in disable
-	stubManager.Write("ACTUATOR-IN  moving Dn\n"); 
-
-	temp = 1;
-	 i=0;		
-	while ((temp != 0x0)&& (i<200) )		//wait until Limit Switch or timeout 200*50msec=10sec
-			{	
-					temp=read_pio (ACTIN_EN);	// read ACTIN_EN
-					delay(50);
-					i++;
-			}
-
-	if(i == 200)
-		{
-			Units_status[41,1]="Fail";
-			stubManager.Write("CTUATOR-IN is not moving Down\n");
-			return 0;
-		}
-		
-	DialogResult result3 = MessageBox.Show("Limit Switch calibrate ?", "Warning",MessageBoxButtons.OKCancel);
-	if(result3 == DialogResult.Cancel)
-		{
-			Units_status[43,1]="Fail";
-			stubManager.Write("LS_IN_Down Not calibrate\n");
-			return 0;
-		}
-	Units_status[43,1]="Pass";
-	return 0;
-
-}
-//------------------------------------------------------------- 
- int Test_Actuator_out()
-{  
-	Int32 temp;
-	int i=0;
-	
-	DialogResult result = MessageBox.Show("Make shure, ACTUATOR-OUT is down", "Warning",MessageBoxButtons.OKCancel);
-	if(result == DialogResult.Cancel)
-		{
-			Units_status[44,1]="Fail";
-			stubManager.Write("ACTUATOR-OUT is Up\n"); 
-			return 0;
-		}
-//---------------------- move ACTUATOR-OUT Up ---------------------------- 
-	stubManager.Run<ProgressResponse>("ProgressRequest" ,0x0EAD,ACTDIR_ON);	// DIR=1
-	stubManager.Run<ProgressResponse>("ProgressRequest" ,0x0EAD,ACTOUT_ON);	// act_OUT enable
-	delay(10);																					
-	stubManager.Run<ProgressResponse>("ProgressRequest" ,0x0EAD,ACTOUT_OFF);	// act_OUT disable
-	stubManager.Write("ACTUATOR-OUT  moving Up\n"); 
-
-	temp = 1;
-	 i=0;		
-	while ((temp != 0x0)&& (i<200) )		//wait until Limit Switch or timeout 200*50msec=10sec
-			{	
-					temp=read_pio (ACTOUT_EN);	// read ACTOUT_EN
-					delay(50);
-					i++;
-			}
-
-	if(i == 200)
-		{
-			Units_status[44,1]="Fail";
-			stubManager.Write("CTUATOR-OUT is not moving Up\n");
-			return 0;
-		}
-		
-	DialogResult result2 = MessageBox.Show("Limit Switch calibrate ?", "Warning",MessageBoxButtons.OKCancel);
-	if(result2 == DialogResult.Cancel)
-		{
-			Units_status[45,1]="Fail";
-			stubManager.Write("LS_OUT_UP Not calibrate\n");
-			return 0;
-		}
-	Units_status[44,1]="Pass";
-	Units_status[45,1]="Pass";
-//---------------------- move ACTUATOR-OUT Dn ---------------------------- 
-	stubManager.Run<ProgressResponse>("ProgressRequest" ,0x0EAD,ACTDIR_OFF);	// DIR=0
-	stubManager.Run<ProgressResponse>("ProgressRequest" ,0x0EAD,ACTOUT_ON);	// act_out enable
-	delay(10);																					
-	stubManager.Run<ProgressResponse>("ProgressRequest" ,0x0EAD,ACTOUT_OFF);	// act_out disable
-	stubManager.Write("ACTUATOR-OUT  moving Dn\n"); 
-
-	temp = 1;
-	 i=0;		
-	while ((temp != 0x0)&& (i<200) )		//wait until Limit Switch or timeout 200*50msec=10sec
-			{	
-					temp=read_pio (ACTOUT_EN);	// read ACTOUT_EN
-					delay(50);
-					i++;
-			}
-
-	if(i == 200)
-		{
-			Units_status[44,1]="Fail";
-			stubManager.Write("CTUATOR-OUT is not moving Down\n");
-			return 0;
-		}
-		
-	DialogResult result3 = MessageBox.Show("Limit Switch calibrate ?", "Warning",MessageBoxButtons.OKCancel);
-	if(result3 == DialogResult.Cancel)
-		{
-			Units_status[46,1]="Fail";
-			stubManager.Write("LS_OUT_Down Not calibrate\n");
-			return 0;
-		}
-	Units_status[46,1]="Pass";
-	return 0;
-
-}
-
-
-
-//-------------------------------------------- 
- int Test_Magnet_Motor_LS_New_DyeHead()
-{  
-	Int32 temp;
-	int i=0;
-//---------------------- open Magnet ---------------------------- 
-		stubManager.Run<ProgressResponse>("ProgressRequest" ,0x0EAD,MGNET_OPEN);	// turn magnet on
-		stubManager.Run<ProgressResponse>("ProgressRequest" ,0x0EAD,MGNET_EN);	// magnet enable
-		stubManager.Write("Magnet is Open\n"); 
-		delay(1000);																					
-//---------------------- chekc Magnet is open  ---------------------------- 
-		temp=read_pio (LS_UPPER);	// read LS_UPPER
-		if (temp != 0)		
-		{	
-			Units_status[36,1]="Fail";
-			stubManager.Write("Magnet is close\n"); 
-			return 0;
-		}
-	DialogResult result = MessageBox.Show("Make shure, Magnet is open", "Warning",MessageBoxButtons.OKCancel);
-	if(result == DialogResult.Cancel)
-		{
-			Units_status[36,1]="Fail";
-			stubManager.Write("Magnet is close\n"); 
-			return 0;
-		}
-//---------------------- Move DyeingHead Lid Motor rear---------------------------- 
-	stubManager.Run<StubMotorRunResponse>("StubMotorRunRequest" ,DyeingHeadLid_Motor, true, 250);
-	stubManager.Write("***   Open Lid Head \n");
-	
-	temp = 0;
-	 i=0;		
-	while ((temp == 0x0)&& (i<200) )		//wait until Limit Switch or timeout 200*50msec=10sec
-			{	
-					temp=read_pio (LS_REAR);	// read LS_REAR
-					delay(50);
-					i++;
-			}
-	stubManager.Run<StubMotorStopResponse>("StubMotorStopRequest" ,DyeingHeadLid_Motor,3);		//stop motor
-	if(i == 200)
-		{
-			Units_status[37,1]="Fail";
-			Units_status[39,1]="Fail";
-			stubManager.Write("LS_REAR Not calibrate\n");
-			return 0;
-		}
-	DialogResult result2 = MessageBox.Show("Limit Switch calibrate ?", "Warning",MessageBoxButtons.OKCancel);
-	if(result2 == DialogResult.Cancel)
-		{
-			Units_status[37,1]="Fail";
-			Units_status[39,1]="Fail";
-			stubManager.Write("LS_REAR Not calibrate\n");
-			return 0;
-		}
-	Units_status[37,1]="Pass";
-//---------------------- Move DyeingHead Lid Motor front---------------------------- 
-	stubManager.Write("***   Close Lid Head \n");
-	stubManager.Run<StubMotorRunResponse>("StubMotorRunRequest" ,DyeingHeadLid_Motor, false, 250);
-	temp = 0;
-	 i=0;		
-	while ((temp == 0x0)&& (i<200) )		//wait until Limit Switch or timeout 200*50msec=10sec
-			{	
-					temp=read_pio (LS_FRONT);	// read LS_FRONT
-					delay(50);
-					i++;
-			}
-	stubManager.Run<StubMotorStopResponse>("StubMotorStopRequest" ,DyeingHeadLid_Motor,3);		//stop motor
-	if(i == 200)
-		{
-			Units_status[38,1]="Fail";
-			stubManager.Write("LS_FRONT Not calibrate\n");
-			return 0;
-		}
-		
-	DialogResult result3 = MessageBox.Show("Limit Switch calibrate ?", "Warning",MessageBoxButtons.OKCancel);
-	if(result3 == DialogResult.Cancel)
-		{
-			Units_status[38,1]="Fail";
-			stubManager.Write("LS_FRONT Not calibrate\n");
-			return 0;
-		}
-	Units_status[37,1]="Pass";
-	Units_status[38,1]="Pass";
-//---------------------- Close Magnet ---------------------------- 
-		stubManager.Run<ProgressResponse>("ProgressRequest" ,0x0EAD,MGNET_CLOSE);	// turn magnet off
-		delay(2000);																					
-		stubManager.Run<ProgressResponse>("ProgressRequest" ,0x0EAD,MGNET_DIS);	// magnet Disable
-		
-		stubManager.Write("Magnet is Close\n"); 
-		delay(1000);																					
-//---------------------- chekc Magnet is close  ---------------------------- 
-		temp=read_pio (LS_UPPER);	// read LS_UPPER
-		if (temp == 0)		
-		{	
-			Units_status[36,1]="Fail";
-			stubManager.Write("Magnet is open\n"); 
-			return 0;
-		}
-	DialogResult result4 = MessageBox.Show("Make shure, Magnet is close", "Warning",MessageBoxButtons.OKCancel);
-	if(result4 == DialogResult.Cancel)
-		{
-			Units_status[36,1]="Fail";
-			stubManager.Write("Magnet is open\n"); 
-			return 0;
-		}
-			Units_status[36,1]="Pass";
-			stubManager.Write("Magnet is close\n"); 
-			return 0;
-}		
-  
-
-//------------------------------------  
-public int Test_new_heaters_pt100()
-{
-	
-//	uint utemp=0;
-	Int32 temp=0;
-	float ftemp=0;
-	float ftemp1=0;
-	float current=0;
-	Double current_sense; 
-
-	for (Int32 i = 0; i < 12; i++)
-	{
-		Int32 tdly=10000;
-//---------------------- get tempurature of heaters---------------------------- 
-		temp= 12+i/2+(i%2)*8;			//HZone_1=12
-										//HZone_2=20
-										//HZone_3=13
-										//HZone_4=21
-										//HZone_5=14
-										//HZone_6=22
-										//HZone_7=15
-										//HZone_8=23
-										//HZone_9=16
-										//HZone_10=24
-										//HZone_11=17
-										//HZone_11=25
-		var response = stubManager.Run<StubTempSensorResponse>("StubTempSensorRequest" , temp);	//get temperature from the buffer
-		 ftemp = (float)response.TemperatureCMultBy100;
-		ftemp = ftemp / 100;
-
-		if ((ftemp>50)|| (ftemp<15))
-		{	
-			Units_status[i,1]="Fail";
-			tdly=1000;
-
-		}
-		stubManager.Write("Zone-"+(i+1)+ "\t" + ftemp.ToString("F2")+"°C\n"); 
-//---------------------- get current of heaters  ---------------------------- 
-	var response1 = stubManager.Run<StubMidTankPressureSensorResponse>("StubMidTankPressureSensorRequest" ,0x8000 + i); // get current
-		current_sense=response1.Pressure;
-		if (current_sense>0.1)
-		{	
-			Units_status[i+12,1]="Fail";
-		}
-		stubManager.Write("current is "+(i+1)+ "\t" + current_sense +"\n"); 
-//---------------------- get Break of heaters  ---------------------------- 
-	var response2 = stubManager.Run<ProgressResponse>("ProgressRequest" ,0x0EAD,0x440000 +(i/8)*0x100+(1<<(i&7)));	// read break
-		temp = (Int32) (response2.Progress);
-		if ((temp & (1<<(i&7))) !=0)						//if break ok
-		{	
-			Units_status[i+24,1]="Fail";
-			stubManager.Write("Break Zone "+(i+1)+ "\t is Off\n"); 
-		}
-		else
-		{
-			stubManager.Write("Break Zone "+(i+1)+ "\t is Off\n"); 
-		}
-//---------------------- turn heater on  ---------------------------- 
-		stubManager.Run<ProgressResponse>("ProgressRequest" ,0x0EAD,0x400200 +(i/8)*0x100+(1<<(i&7)));	// turn heater on 
-		stubManager.Write("Heater -  "+(i+1)+ "\t is On\n"); 
-		delay(2000);																					//delay 20 second
-//---------------------- get current of heaters  ---------------------------- 
-	var response3 = stubManager.Run<StubMidTankPressureSensorResponse>("StubMidTankPressureSensorRequest" ,0x8000 + i); // get current
-		current_sense=response3.Pressure;
-		if ((current_sense<1.1) ||(current_sense>1.4) )		//if current not 1.25A  
-		{	
-			Units_status[i+12,1]="Fail";
-		}
-		stubManager.Write("current is "+(i+1)+ "\t" + current_sense +"\n"); 
-//---------------------- get Break of heaters  ---------------------------- 
-	var response4 = stubManager.Run<ProgressResponse>("ProgressRequest" ,0x0EAD,0x440000 +(i/8)*0x100+(1<<(i&7)));	// read break
-		temp = (Int32) (response4.Progress);
-		if ((temp & (1<<(i&7))) !=0)						//if break ok
-		{	
-			Units_status[i+24,1]="Fail";
-			stubManager.Write("Break Zone "+(i+1)+ "\t is Off\n"); 
-		}
-		else
-		{
-			stubManager.Write("Break Zone "+(i+1)+ "\t is On\n"); 
-		}
-		delay(tdly);																					//delay 20 second
-		temp= 12+i/2+(i%2)*8;
-		var response5 = stubManager.Run<StubTempSensorResponse>("StubTempSensorRequest" , temp);	//get temperature from the buffer
-		ftemp1 = (float)response5.TemperatureCMultBy100;
-		ftemp1 = ftemp1 / 100;
-
-		if (((ftemp1-ftemp)<5)|| ((ftemp1-ftemp)>35))
-		{	
-			Units_status[i,1]="Fail";
-		}
-		stubManager.Write("Zone-"+(i+1)+ "after heating is \t" + ftemp1.ToString("F2")+"°C\n"); 
-//---------------------- turn heater off  ---------------------------- 
-		stubManager.Run<ProgressResponse>("ProgressRequest" ,0x0EAD,0x400200 +(i/8)*0x100);	// turn heater off 
-		stubManager.Write("Heater -  "+(i+1)+ "\t is Off\n"); 
-
-	}	
-			return 0;
-}
-
-Int32 read_pio(Int32 i2c_input)
-{
-		Int32 temp=0;
-	var response = stubManager.Run<ProgressResponse>("ProgressRequest" ,0x0EAD,i2c_input);	// read break
-		temp = (Int32) (response.Progress);
-		temp =temp & (i2c_input& 0xff);						//if break ok
-		return temp;
-}
-//end mati
-	
-	//enable_all_channel();
-public int Test_Head_EEPROM(string s_n)
-{
-
-	enable_channel(Head_Mux_Channel_ID); // Chanel 0-7 => Disp0enser 0-7 
-	
-		Write_EEPROM(0xA0,s_n);
-		delay(20); 					//Sleep for 5 milli. - must! otherwise read 0xff (See data sheet )	
-		
-		adc_set_for_read_ch(0xA0);
-		//Thread.Sleep(1); //Sleep for 10 milli.
-		Read_EEPROM(0xA0);
-		
-		delay(20); 					//Sleep for 5 milli. - must! otherwise read 0xff (See data sheet )	
-		return 0;
-
-}
-
-
-
-int enable_channel(int Channel_ID) 
-{
-	uint Const_temp = 0x01;	
-	
-	StubI2CWriteBytesRequest stubI2CWriteBytesRequest = new StubI2CWriteBytesRequest();
-	stubI2CWriteBytesRequest.I2CId = I2C_ID3;
-	stubI2CWriteBytesRequest.SlaveAddress = TCA9548A_address;
-	
-	Const_temp = Const_temp << Channel_ID;
-	stubI2CWriteBytesRequest.BytesTWrite.Add(Const_temp);
-
-	var response = stubManager.Run<StubI2CWriteBytesResponse>(stubI2CWriteBytesRequest);
-	
-	return 1;
-}
-
-int Write_EEPROM (uint I2C_Slave_Add,string s_n   ) 
-{
-	
-	StubI2CWriteBytesRequest stubI2CWriteBytesRequest = new StubI2CWriteBytesRequest();
-	stubI2CWriteBytesRequest.I2CId = I2C_ID3;
-	stubI2CWriteBytesRequest.SlaveAddress = I2C_Slave_Add;
-	
-	UInt32 uInt32 = new UInt32();
-	stubI2CWriteBytesRequest.BytesTWrite.Add(0);//Byte 0 to write
-	stubI2CWriteBytesRequest.BytesTWrite.Add(0);//Byte 0 to write
-	//--------------------------------------------------------------
-		char[] characters = EEPROM_Header.ToCharArray();	
-
-	for (int i=0;i<16;i++)
-		{
-		stubI2CWriteBytesRequest.BytesTWrite.Add(characters[i]);	//add header
-		}
-		characters = s_n.ToCharArray();	
-		
-	for (int i=0;i<16;i++)
-		{
-			stubI2CWriteBytesRequest.BytesTWrite.Add(characters[i]);	//add s/n
-		}
-	var response = stubManager.Run<StubI2CWriteBytesResponse>(stubI2CWriteBytesRequest);
-	
-	return 1;
-}
-
-int Read_EEPROM(uint I2C_Slave_Add) 
-{
-	StubI2CReadBytesRequest stubI2CReadBytesRequest = new StubI2CReadBytesRequest();
-	stubI2CReadBytesRequest.I2CId = I2C_ID3;
-	stubI2CReadBytesRequest.SlaveAddress = I2C_Slave_Add + 1;
-	stubI2CReadBytesRequest.NumberOfBytesToRead = 16; // Number of header bytes to read
-
-	var response1 = stubManager.Run<StubI2CReadBytesResponse>(stubI2CReadBytesRequest);
-	uint temph=0;
-		char[] characters = EEPROM_Header.ToCharArray();	
-
-	for(int i=0; i<stubI2CReadBytesRequest.NumberOfBytesToRead;i++)
-	{
-			if (characters[i]!=response1.ReadBytes[i]);
-				Units_status[40,1]="Fail";
-	}
-	stubManager.Write("EEprom "+ Units_status[40,1]+"\n"); 
-	
-	return 1;
-}