Updated events definitions.

1 files changed, 177 insertions, 27 deletions

diff --git a/Software/Visual_Studio/Tango.BL/Enumerations/EventTypes.cs b/Software/Visual_Studio/Tango.BL/Enumerations/EventTypes.cs
index 93732c9f3..27a2b78e3 100644
--- a/Software/Visual_Studio/Tango.BL/Enumerations/EventTypes.cs
+++ b/Software/Visual_Studio/Tango.BL/Enumerations/EventTypes.cs
@@ -698,10 +698,10 @@ namespace Tango.BL.Enumerations
         DRYER_HEATERS_ZONE_2_CURRENT_LOOP_BREAK = 4014,
 
         /// <summary>
-        /// (Dryer fan RPM is too low. Cannot execute job)
+        /// (Dryer filter is clogged. Cannot execute job)
         /// </summary>
-        [Description("Dryer fan RPM is too low. Cannot execute job")]
-        DRYER_FAN_RPM_TOO_LOW = 4015,
+        [Description("Dryer filter is clogged. Cannot execute job")]
+        DRYER_FILTER_IS_CLOGGED = 4015,
 
         /// <summary>
         /// (Dryer fan stopped. Cannot execute job)
@@ -2654,16 +2654,16 @@ namespace Tango.BL.Enumerations
         E_DRYER_DOOR_OPEN = 103002,
 
         /// <summary>
-        /// (Dryer thermal cutoff activated. Cannot execute job)
+        /// (Dryer temperatue too high. Cannot execute job)
         /// </summary>
-        [Description("Dryer thermal cutoff activated. Cannot execute job")]
-        E_DRYER_THERMAL_CUTOFF = 103003,
+        [Description("Dryer temperatue too high. Cannot execute job")]
+        E_DRYER_HEATER_1_TEMPERATURE_TOO_HIGH = 103003,
 
         /// <summary>
-        /// (Tunnel thermal cutoff activated. Cannot execute job)
+        /// (Tunnel temperature too high. Cannot execute job)
         /// </summary>
-        [Description("Tunnel thermal cutoff activated. Cannot execute job")]
-        E_TUNNEL_THERMAL_CUTOFF = 103004,
+        [Description("Tunnel temperature too high. Cannot execute job")]
+        E_TUNNEL_HEATER_TEMPERATURE_TOO_HIGH = 103004,
 
         /// <summary>
         /// (Dyeing head thermal cutoff activated. Cannot execute job)
@@ -2684,16 +2684,16 @@ namespace Tango.BL.Enumerations
         E_LUBRICATION_THERMAL_CUTOFF = 103007,
 
         /// <summary>
-        /// (No air flow in tunnel. Cannot execute job)
+        /// (No suction in tunnel. Cannot execute job)
         /// </summary>
-        [Description("No air flow in tunnel. Cannot execute job")]
+        [Description("No suction in tunnel. Cannot execute job")]
         E_TUNNEL_AIR_FLOW_SWITCH = 103008,
 
         /// <summary>
-        /// (No Suction from recycled ink handling system. Cannot execute job)
+        /// (No Suction in dryer. Cannot execute job)
         /// </summary>
-        [Description("No Suction from recycled ink handling system. Cannot execute job")]
-        E_WHS_AIR_FLOW_SWITCH = 103009,
+        [Description("No Suction in dryer. Cannot execute job")]
+        E_DRYER_AIR_FLOW_SWITCH = 103009,
 
         /// <summary>
         /// (Air filter not present. Cannot execute job)
@@ -2702,6 +2702,18 @@ namespace Tango.BL.Enumerations
         E_AIR_FILTER_NOT_PRESENT = 103010,
 
         /// <summary>
+        /// (Dryer temperature too high. Cannot execute job)
+        /// </summary>
+        [Description("Dryer temperature too high. Cannot execute job")]
+        E_DRYER_HEATER_2_TEMPERATURE_TOO_HIGH = 103011,
+
+        /// <summary>
+        /// (Dryer temperature too high. Cannot execute job)
+        /// </summary>
+        [Description("Dryer temperature too high. Cannot execute job")]
+        E_DRYER_HEATER_3_TEMPERATURE_TOO_HIGH = 103012,
+
+        /// <summary>
         /// (Software error has occurred. Cannot execute job )
         /// </summary>
         [Description("Software error has occurred. Cannot execute job ")]
@@ -2822,6 +2834,30 @@ namespace Tango.BL.Enumerations
         E_NO_COMMUNICATION_WITH_MAIN_BOARD = 105017,
 
         /// <summary>
+        /// (Communication error. Cannot execute job)
+        /// </summary>
+        [Description("Communication error. Cannot execute job")]
+        E_NO_COMMUNICATION_WITH_BTSR_5 = 105018,
+
+        /// <summary>
+        /// (Communication error. Cannot execute job)
+        /// </summary>
+        [Description("Communication error. Cannot execute job")]
+        E_NO_COMMUNICATION_WITH_BTSR_6 = 105019,
+
+        /// <summary>
+        /// (Communication error. Cannot execute job)
+        /// </summary>
+        [Description("Communication error. Cannot execute job")]
+        E_NO_COMMUNICATION_WITH_BTSR_7 = 105020,
+
+        /// <summary>
+        /// (Communication error. Cannot execute job)
+        /// </summary>
+        [Description("Communication error. Cannot execute job")]
+        E_NO_COMMUNICATION_WITH_BTSR_8 = 105021,
+
+        /// <summary>
         /// (Door is open. Cannot execute job)
         /// </summary>
         [Description("Door is open. Cannot execute job")]
@@ -2948,64 +2984,118 @@ namespace Tango.BL.Enumerations
         E_THREAD_MISSING = 107015,
 
         /// <summary>
+        /// (Loading comb not in place. Cannot execute job)
+        /// </summary>
+        [Description("Loading comb not in place. Cannot execute job")]
+        E_LOADING_COMB_NOT_IN_PLACE = 107016,
+
+        /// <summary>
+        /// (BTSR malfunction. Cannot execute job)
+        /// </summary>
+        [Description("BTSR malfunction. Cannot execute job")]
+        E_BTSR_5_MALFUNCTION = 107017,
+
+        /// <summary>
+        /// (BTSR malfunction. Cannot execute job)
+        /// </summary>
+        [Description("BTSR malfunction. Cannot execute job")]
+        E_BTSR_6_MALFUNCTION = 107018,
+
+        /// <summary>
+        /// (BTSR malfunction. Cannot execute job)
+        /// </summary>
+        [Description("BTSR malfunction. Cannot execute job")]
+        E_BTSR_7_MALFUNCTION = 107019,
+
+        /// <summary>
+        /// (BTSR malfunction. Cannot execute job)
+        /// </summary>
+        [Description("BTSR malfunction. Cannot execute job")]
+        E_BTSR_8_MALFUNCTION = 107020,
+
+        /// <summary>
+        /// (Tension is out of range. Cannot execute job)
+        /// </summary>
+        [Description("Tension is out of range. Cannot execute job")]
+        E_TENSION_IN_BTSR_5_IS_OUT_OF_RANGE = 107021,
+
+        /// <summary>
+        /// (Tension is out of range. Cannot execute job)
+        /// </summary>
+        [Description("Tension is out of range. Cannot execute job")]
+        E_TENSION_IN_BTSR_6_IS_OUT_OF_RANGE = 107022,
+
+        /// <summary>
+        /// (Tension is out of range. Cannot execute job)
+        /// </summary>
+        [Description("Tension is out of range. Cannot execute job")]
+        E_TENSION_IN_BTSR_7_IS_OUT_OF_RANGE = 107023,
+
+        /// <summary>
+        /// (Tension is out of range. Cannot execute job)
+        /// </summary>
+        [Description("Tension is out of range. Cannot execute job")]
+        E_TENSION_IN_BTSR_8_IS_OUT_OF_RANGE = 107024,
+
+        /// <summary>
         /// (Temperature in dyeing head is too high. Cannot execute job)
         /// </summary>
         [Description("Temperature in dyeing head is too high. Cannot execute job")]
-        E_DYEING_HEAD_ZONE_1_OVERTEMPERATURE = 108000,
+        E_DYEING_HEAD_ZONE_1_OVERTEMPERATURE_A = 108000,
 
         /// <summary>
         /// (Temperature in dyeing head is too high. Cannot execute job)
         /// </summary>
         [Description("Temperature in dyeing head is too high. Cannot execute job")]
-        E_DYEING_HEAD_ZONE_2_OVERTEMPERATURE = 108001,
+        E_DYEING_HEAD_ZONE_2_OVERTEMPERATURE_A = 108001,
 
         /// <summary>
         /// (Temperature in dyeing head is too high. Cannot execute job)
         /// </summary>
         [Description("Temperature in dyeing head is too high. Cannot execute job")]
-        E_DYEING_HEAD_ZONE_3_OVERTEMPERATURE = 108002,
+        E_DYEING_HEAD_ZONE_3_OVERTEMPERATURE_A = 108002,
 
         /// <summary>
         /// (Temperature in mixer is too high. Cannot execute job)
         /// </summary>
         [Description("Temperature in mixer is too high. Cannot execute job")]
-        E_MIXER_1_OVERTEMPERATURE = 108003,
+        E_MIXER_1_OVERTEMPERATURE_A = 108003,
 
         /// <summary>
         /// (Temperature in mixer is too high. Cannot execute job)
         /// </summary>
         [Description("Temperature in mixer is too high. Cannot execute job")]
-        E_MIXER_2_OVERTEMPERATURE = 108004,
+        E_MIXER_2_OVERTEMPERATURE_A = 108004,
 
         /// <summary>
         /// (Temperature in tunnel is too high. Cannot execute job)
         /// </summary>
         [Description("Temperature in tunnel is too high. Cannot execute job")]
-        E_TUNNEL_OVERTEMPERATURE = 108005,
+        E_TUNNEL_OVERTEMPERATURE_A = 108005,
 
         /// <summary>
         /// (Temperature in dryer is too high. Cannot execute job)
         /// </summary>
         [Description("Temperature in dryer is too high. Cannot execute job")]
-        E_DRYER_HEATER_1_OVERTEMPERATURE = 108007,
+        E_DRYER_HEATER_1_OVERTEMPERATURE_A = 108007,
 
         /// <summary>
         /// (Temperature in dryer is too high. Cannot execute job)
         /// </summary>
         [Description("Temperature in dryer is too high. Cannot execute job")]
-        E_DRYER_HEATER_2_OVERTEMPERATURE = 108008,
+        E_DRYER_HEATER_2_OVERTEMPERATURE_A = 108008,
 
         /// <summary>
         /// (Temperature in dryer is too high. Cannot execute job)
         /// </summary>
         [Description("Temperature in dryer is too high. Cannot execute job")]
-        E_DRYER_HEATER_3_OVERTEMPERATURE = 108009,
+        E_DRYER_HEATER_3_OVERTEMPERATURE_A = 108009,
 
         /// <summary>
         /// (Temperature in lubricant is too high. Cannot execute job)
         /// </summary>
         [Description("Temperature in lubricant is too high. Cannot execute job")]
-        E_LUBRICANT_OVERTEMPERATURE = 108010,
+        E_LUBRICANT_OVERTEMPERATURE_A = 108010,
 
         /// <summary>
         /// (Dyeing head is heating up. Cannot execute job)
@@ -3071,7 +3161,7 @@ namespace Tango.BL.Enumerations
         /// (Temperature in dyeing head is too low. Cannot execute job)
         /// </summary>
         [Description("Temperature in dyeing head is too low. Cannot execute job")]
-        E_DYEING_HEAD_ZONE_1_UNDRTEMPERATURE_B = 108021,
+        E_DYEING_HEAD_ZONE_1_UNDERTEMPERATURE_B = 108021,
 
         /// <summary>
         /// (Temperature in dyeing head is too low. Cannot execute job)
@@ -3164,6 +3254,66 @@ namespace Tango.BL.Enumerations
         E_DRYER_INTERNAL_TEMPERATURE_TOO_LOW = 108036,
 
         /// <summary>
+        /// (Temperature in dyeing head is stabilizing . Cannot execute job)
+        /// </summary>
+        [Description("Temperature in dyeing head is stabilizing . Cannot execute job")]
+        E_DYEING_HEAD_ZONE_1_OVERTEMPERATURE_B = 108037,
+
+        /// <summary>
+        /// (Temperature in dyeing head is stabilizing . Cannot execute job)
+        /// </summary>
+        [Description("Temperature in dyeing head is stabilizing . Cannot execute job")]
+        E_DYEING_HEAD_ZONE_2_OVERTEMPERATURE_B = 108038,
+
+        /// <summary>
+        /// (Temperature in dyeing head is stabilizing . Cannot execute job)
+        /// </summary>
+        [Description("Temperature in dyeing head is stabilizing . Cannot execute job")]
+        E_DYEING_HEAD_ZONE_3_OVERTEMPERATURE_B = 108039,
+
+        /// <summary>
+        /// (Temperature in mixer is stabilizing. Cannot execute job)
+        /// </summary>
+        [Description("Temperature in mixer is stabilizing. Cannot execute job")]
+        E_MIXER_1_OVERTEMPERATURE_B = 108040,
+
+        /// <summary>
+        /// (Temperature in mixer is stabilizing. Cannot execute job)
+        /// </summary>
+        [Description("Temperature in mixer is stabilizing. Cannot execute job")]
+        E_MIXER_2_OVERTEMPERATURE_B = 108041,
+
+        /// <summary>
+        /// (Temperature in tunnel is stabilizing. Cannot execute job)
+        /// </summary>
+        [Description("Temperature in tunnel is stabilizing. Cannot execute job")]
+        E_TUNNEL_OVERTEMPERATURE_B = 108042,
+
+        /// <summary>
+        /// (Temperature in dryer is stabilizing. Cannot execute job)
+        /// </summary>
+        [Description("Temperature in dryer is stabilizing. Cannot execute job")]
+        E_DRYER_HEATER_1_OVERTEMPERATURE_B = 108043,
+
+        /// <summary>
+        /// (Temperature in dryer is stabilizing. Cannot execute job)
+        /// </summary>
+        [Description("Temperature in dryer is stabilizing. Cannot execute job")]
+        E_DRYER_HEATER_2_OVERTEMPERATURE_B = 108044,
+
+        /// <summary>
+        /// (Temperature in dryer is stabilizing. Cannot execute job)
+        /// </summary>
+        [Description("Temperature in dryer is stabilizing. Cannot execute job")]
+        E_DRYER_HEATER_3_OVERTEMPERATURE_B = 108045,
+
+        /// <summary>
+        /// (Temperature in lubricant is stabilizing. Cannot execute job)
+        /// </summary>
+        [Description("Temperature in lubricant is stabilizing. Cannot execute job")]
+        E_LUBRICANT_OVERTEMPERATURE_B = 108046,
+
+        /// <summary>
         /// (Dyeing head zone current is out of range. Cannot execute job)
         /// </summary>
         [Description("Dyeing head zone current is out of range. Cannot execute job")]
@@ -3380,9 +3530,9 @@ namespace Tango.BL.Enumerations
         E_AIR_FILTER_CLOGGED = 111004,
 
         /// <summary>
-        /// (No circulation flow in blower. Cannot execute job)
+        /// (No circulation flow in dryer. Cannot execute job)
         /// </summary>
-        [Description("No circulation flow in blower. Cannot execute job")]
+        [Description("No circulation flow in dryer. Cannot execute job")]
         E_NO_CIRCULATION_FLOW_IN_DRYER = 111005,
 
         /// <summary>