1 files changed, 8 insertions, 43 deletions

diff --git a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_ex.h b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_ex.h
index 05cacd20e..29876549e 100644
--- a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_ex.h
+++ b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_ex.h
@@ -9,42 +9,20 @@
 #define WINDER_DANCER HARDWARE_DANCER_TYPE__LeftDancer
 #define POOLER_DANCER HARDWARE_DANCER_TYPE__MiddleDancer
 #define FEEDER_DANCER HARDWARE_DANCER_TYPE__RightDancer
-#define WINDER_2_DANCER HARDWARE_DANCER_TYPE__FourthDancer
-#define WINDER_3_DANCER HARDWARE_DANCER_TYPE__ThirdDancer
-#define WINDER_4_DANCER HARDWARE_DANCER_TYPE__RightDancer
-
-#define NUM_OF_DANCERS NUM_OF_ROTENC
-
-typedef struct
-{
-    uint32_t startoffsetpulses;
-    uint32_t spoolbackingrate;
-    uint32_t segmentoffsetpulses;// the spool winding initial length in mm
-    uint32_t milimetersperrotation;
-    uint32_t SpoolBottomBackingRate;// the angle of the bottom of the spool
-    double NumberOfRotationPerPassage;  // how many rotations per spool passage
-    double diameter;
-}InternalWinderConfigStruc;
-
+#define NUM_OF_DANCERS (HARDWARE_DANCER_TYPE__RightDancer+1)
+//} DANCER_ENUM;
 typedef enum threadMotorsEnum
 {
     FEEDER_MOTOR,
     DRYER_MOTOR,
     POOLER_MOTOR,
     WINDER_MOTOR,
-#ifdef FOUR_WINDERS
-    WINDER_2_MOTOR,
-    WINDER_3_MOTOR,
-    WINDER_4_MOTOR,
-#endif
     SCREW_MOTOR,
     MAX_THREAD_MOTORS_NUM
 }threadMotorsEnum;
 
 extern double TotalProcessedLength;
 extern double PoolerTotalProcessedLength;
-extern int SecondFeederCorrection;
-extern bool SkipOpenLids,IgnoreConeMissing;
 
 void ThreadSetBreakSensorLimit(int limit);
 
@@ -58,18 +36,13 @@ uint32_t ThreadPreSegmentState(void *SegmentDetails, uint32_t SegmentId);
 uint32_t ThreadSegmentState(void *SegmentDetails, int SegmentId);
 uint32_t ThreadDistanceToSpoolState(void);
 uint32_t ThreadEndState();
+uint32_t ThreadInitialTestStub();
 
-bool Set_Thread_Rockers_Bypass (int value);
-
-uint32_t StoreDancerConfigMessage(int DancerId);
+uint32_t StoreDancerConfigMessage(void);
 uint32_t LoadDancerConfigMessage(void);
 
 //uint32_t MotorPidRequestMessage(HardwarePidControl* request);
-extern float NumberOfRotationPerPassage; //debug for rotation per passage trials
-extern InternalWinderConfigStruc InternalWinderCfg;
-
 uint32_t Winder_Init(void);
-uint32_t Winder_Check_Cone(void);
 uint32_t Winder_Prepare(void *JobDetails);
 uint32_t Winder_Presegment(void *JobDetails, uint32_t SegmentId);
 uint32_t WinderDistanceToSpoolState(void );
@@ -79,10 +52,10 @@ typedef enum
 {
     /*00*/ THREAD_LOAD_INIT,
     /*01*/ THREAD_LOAD_REDUCE_HEAT,  //HEATERS OFF, DRYER BLOWER OFF, BLOWER LOW,
-    /*02*/ THREAD_LOAD_LIFT_ROCKERS, //MACHINE IS READY. SEND MESSAGE, START TIMER TO CLOSE LIDS, WAIT FOR OPERATOR RESPONSE
-    /*03*/ THREAD_LOAD_SET_LOAD_ARM_TO_START_POSITION,//USE NOTATION HOW MANY ROTATIONS IN THE DRYER, OR CHECK AGAINST STOPPER. MOVE SLOWLY
-    /*04*/ THREAD_LOAD_OPEN_COVERS,  //OPEN DYEING HEAD COVER AND DRYER LID
-    /*05*/ THREAD_LOAD_LIFT_DANCERS,
+    /*02*/ THREAD_LOAD_SET_LOAD_ARM_TO_START_POSITION,//USE NOTATION HOW MANY ROTATIONS IN THE DRYER, OR CHECK AGAINST STOPPER. MOVE SLOWLY
+    /*03*/ THREAD_LOAD_OPEN_COVERS,  //OPEN DYEING HEAD COVER AND DRYER LID
+    /*04*/ THREAD_LOAD_LIFT_DANCERS,
+    /*05*/ THREAD_LOAD_LIFT_ROCKERS, //MACHINE IS READY. SEND MESSAGE, START TIMER TO CLOSE LIDS, WAIT FOR OPERATOR RESPONSE
     /*06*/ THREAD_LOAD_INITIAL_TENSION,//CHECK SPOOL PRESENCERUN WINDER UNTIL BREAK SENSOR IS IDENTIFIEING MOVEMENT FOR A SECOND
     /*07*/ THREAD_LOAD_CLOSE_ROCKERS,
     /*08*/ THREAD_LOAD_CLOSE_DANCERS, //SEND DANCER MOTORS TO PRESET LOCATION, CHECK THAT THE DANCERS ARE ON THE THREAD
@@ -101,14 +74,6 @@ bool ThreadLoadingActive(void);
 void ThreadLoadPollRequest(MessageContainer* requestContainer);
 void ThreadLoadRequest(MessageContainer* requestContainer);
 
-uint32_t StartThreadLoadingFunc(MessageContainer* requestContainer);
-uint32_t ContinueThreadLoadingFunc(MessageContainer* requestContainer);
-uint32_t StopThreadLoadingFunc(MessageContainer* requestContainer);
-uint32_t TryThreadLoadingFunc(MessageContainer* requestContainer);
-uint32_t AttemptThreadJoggingFunc(MessageContainer* requestContainer);
-
-void ThreadCheckArcHeadCovers(void);
 uint32_t Thread_Load_End(void);
-uint32_t ThreadLoadingRestartReport(void); //sending after a failure in the finalizing stage
 
 #endif