From adebfb6bccfc75ae2057a538f5b028b45ac2d8b4 Mon Sep 17 00:00:00 2001
From: Shlomo Hecht <shlomo@twine-s.com>
Date: Mon, 29 Jun 2020 21:50:42 +0300
Subject: Embedded SW Release note - Version 1.4.6.34 - Pack 2+
 ============================================================= Validate IFS
 and cartridge location on manual waste handling - bug #3033 better handling
 of powerstep01 configuration and motors clocks waste level: logs, fixed
 reading during waste filling, fix PT100 reading in WHS                       
                                                                              
                                                                              
              //important, OK improve diespensers reading in I2C timing       
                                                                              
                                                       //important OK alarm
 handling: fix report (mid tank empty) diagnostics - waste level in liters
 Heating and process - avoid activating all heaters at once. tested for flat
 head. Heating - remove alarms when colling dwn due to change of RML or idle
 mode Thread - improve feeder tension handling system: hold initalization
 process after 3 failures to enable code / parameters change and debugging

---
 Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c   |  6 +++---
 Software/Embedded_SW/Embedded/Modules/Thread/Thread_print.c | 10 +++++-----
 2 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'Software/Embedded_SW/Embedded/Modules/Thread')

diff --git a/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c b/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c
index 965ea30da..2b65ca806 100644
--- a/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c
+++ b/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c
@@ -863,7 +863,7 @@
     uint32_t Thread_Load_Dryer_UnLoading(void)
     {
         uint32_t temp;
-        REPORT_MSG(LoadStages, "Thread UnLoad State Machine step");
+        REPORT_MSG(LoadStages, "Thread Load State Machine step Dryer Unloading");
         //LoadArmRounds = 0;
         //uint32_t numberOfSteps = 0;
         //Start Feeder Pid, Rotate Loading Arm Counter Thread Direction X Circles According To Rml. Feeder Speed Is 40
@@ -1258,7 +1258,7 @@ uint32_t ThreadLoadControlCBFunction(uint32_t IfIndex, uint32_t ReadValue)
 }
 bool ThreadLoaded(void)
 {
-    uint32_t ReadValue;
+   /* uint32_t ReadValue;
 
     int32_t PoolerValue,WinderValue,FeederValue;
     //this function tests if there is a thread in the machine. all dancers are in lowermost position then there is no thread.
@@ -1280,7 +1280,7 @@ bool ThreadLoaded(void)
         Report("Thread is out",__FILE__,(-1*PoolerValue),(-1*WinderValue),RpWarning,(-1*FeederValue),0);
         return true;
     }
-    else
+    else*/
         return false;
 }
 void ThreadLoadRequest(MessageContainer* requestContainer)
diff --git a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_print.c b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_print.c
index 8a4960433..d762e507f 100644
--- a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_print.c
+++ b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_print.c
@@ -217,7 +217,7 @@ uint32_t ThreadLengthCBFunction(uint32_t IfIndex, uint32_t ReadValue)
         }
 
     }
-    FeederSpeedStore[FeederSpeedIndex++] = length;
+    /*FeederSpeedStore[FeederSpeedIndex++] = length;
     if (FeederSpeedIndex>=SPEED_STORE_SIZE)
     {
         FeederSpeedIndex = 0;
@@ -225,8 +225,8 @@ uint32_t ThreadLengthCBFunction(uint32_t IfIndex, uint32_t ReadValue)
         for (Speed_i = 0;Speed_i<SPEED_STORE_SIZE;Speed_i++)
             FeederSpeedAverage+=FeederSpeedStore[Speed_i];
         FeederSpeedAverage = FeederSpeedAverage/SPEED_STORE_SIZE;
-        ReportWithPackageFilter(ThreadFilter,"Average Speed 2 second",__FILE__,__LINE__,(int)(FeederSpeedAverage*100),RpWarning,(int)(PullerSpeedAverage*100),0);
-    }
+        ReportWithPackageFilter(ThreadFilter,"Avg len 100ms last 2 sec",__FILE__,(int)PoolerTotalProcessedLength,(int)(FeederSpeedAverage*1000),RpWarning,(int)(PullerSpeedAverage*1000),0);
+    }*/
     TotalProcessedLength += (length/100);
     TempTotalProcessedLength = TotalProcessedLength;
 #ifdef FEEDER_LENGTH_CALCULATION
@@ -317,7 +317,7 @@ uint32_t PoolerThreadLengthCBFunction(uint32_t IfIndex, uint32_t ReadValue)
             length = 0;
 
         }
-        PullerSpeedStore[PullerSpeedIndex++] = length;
+        /*PullerSpeedStore[PullerSpeedIndex++] = length;
         if (PullerSpeedIndex>=SPEED_STORE_SIZE)
         {
             PullerSpeedIndex = 0;
@@ -326,7 +326,7 @@ uint32_t PoolerThreadLengthCBFunction(uint32_t IfIndex, uint32_t ReadValue)
                 PullerSpeedAverage+=PullerSpeedStore[Speed_i];
             PullerSpeedAverage = PullerSpeedAverage/SPEED_STORE_SIZE;
             //ReportWithPackageFilter(ThreadFilter,"Average Speed 2 second",__FILE__,__LINE__,(int)(FeederSpeedAverage*100),RpWarning,(int)(PullerSpeedAverage*100),0);
-        }
+        }**/
 
     //}
 
-- 
cgit v1.3.1