From 7080d6422a5c20b2acd0562fa2d8b3c91ba1590d Mon Sep 17 00:00:00 2001
From: Shlomo Hecht <shlomo@twine-s.com>
Date: Tue, 19 Mar 2019 11:27:51 +0200
Subject: Version 1.3.8.0 lock

---
 Software/Embedded_SW/Embedded/Modules/Thread/Thread_print.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'Software/Embedded_SW/Embedded/Modules/Thread')

diff --git a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_print.c b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_print.c
index f4dc6a170..6a8474438 100644
--- a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_print.c
+++ b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_print.c
@@ -30,7 +30,6 @@
 #include "drivers/FPGA/FPGA_GPIO/FPGA_GPIO.h"
 #include "modules/heaters/heaters.h"
 #include "modules/General/process.h"
-#include "modules/ids/ids_ex.h"
 #include "Modules/AlarmHandling/AlarmHandling.h"
 #include "Control/MillisecTask.h"
 
@@ -709,7 +708,6 @@ uint32_t ThreadPreSegmentState(void *JobDetails, uint32_t SegmentId)
             MotorSetDirection((TimerMotors_t)HARDWARE_MOTOR_TYPE__MOTO_LLOADING,MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_LLOADING].directionthreadwize);
             MotorSetSpeed(HARDWARE_MOTOR_TYPE__MOTO_LLOADING, 1);
         }
-        IDS_StartLubrication();
     }
     // activate control fr all motors
     //set speed for both rocker motors
@@ -809,7 +807,7 @@ char Endstr[150];
      }
      MotorStop(HARDWARE_MOTOR_TYPE__MOTO_RLOADING,Hard_Hiz);
      MotorStop(HARDWARE_MOTOR_TYPE__MOTO_LLOADING,Hard_Hiz);
-     IDS_StopLubrication();
+
     return OK;
 }
 
-- 
cgit v1.3.1


From 98daf1c80688585d2a34586c30a7ac0bf67dd91b Mon Sep 17 00:00:00 2001
From: Shlomo Hecht <shlomo@twine-s.com>
Date: Tue, 19 Mar 2019 11:52:26 +0200
Subject: PreVersion 1.3.8.1 lubrication, IDS presegment improvement start.
 alarm handling improved, pressure buildup on init, improve centering of drier
 arm. NON Operative, NOT TESTED!

---
 Software/Embedded_SW/Embedded/.cproject            |   3 +-
 .../Embedded_SW/Embedded/Common/SW_Info/SW_Info.c  |   2 +-
 .../PMR/Debugging/DebugLogCategory.pb-c.c          |   4 +-
 .../PMR/EmbeddedParameters/AlarmSourceType.pb-c.c  |  16 +-
 .../PMR/EmbeddedParameters/AlarmSourceType.pb-c.h  |   5 +-
 .../ConfigurationParameters.pb-c.c                 | 110 ++++-
 .../ConfigurationParameters.pb-c.h                 |  18 +-
 .../Communication/PMR/Printing/JobTicket.pb-c.c    |  19 +-
 .../Communication/PMR/Printing/JobTicket.pb-c.h    |   4 +-
 .../Embedded/Drivers/FPGA/FPGA_SPI_Comm.c          |   2 +
 .../Drivers/FPGA/Full_Vme/ispvme/ispvm_ui.c        |  11 +-
 .../Drivers/FPGA/Full_Vme/ispvme/ivm_core.c        |   2 +-
 .../Drivers/FPGA/Full_Vme/ispvme/vmopcode.h        |   2 -
 .../Drivers/I2C_Communication/ADC_MUX/ADC_MUX.c    |   5 +
 .../Drivers/I2C_Communication/ADC_MUX/ADC_MUX.h    |   1 +
 .../Embedded_SW/Embedded/Drivers/Motors/Motor.h    |   1 +
 .../Embedded/Drivers/Motors/MotorActions.c         | 148 +++++-
 Software/Embedded_SW/Embedded/Embedded.cfg         |   3 +
 Software/Embedded_SW/Embedded/Main.c               |   1 -
 .../Embedded/Modules/AlarmHandling/AlarmHandling.c | 534 ++++++++++++---------
 .../Embedded/Modules/AlarmHandling/AlarmHandling.h |   1 +
 .../Embedded/Modules/General/GeneralHardware.c     |   6 +-
 .../Embedded/Modules/IDS/IDS_dispenser.c           |  10 +-
 Software/Embedded_SW/Embedded/Modules/IDS/IDS_ex.h |   4 +
 .../Embedded_SW/Embedded/Modules/IDS/IDS_maint.c   |   4 +-
 .../Embedded_SW/Embedded/Modules/IDS/IDS_print.c   |  74 ++-
 .../Embedded/Modules/Thread/ThreadLoad.c           |   1 +
 .../Embedded/Modules/Thread/Thread_Winder.c        |  12 +-
 .../Embedded/Modules/Thread/Thread_print.c         |   7 +-
 .../Embedded/Software Release Notes.txt            |   2 +-
 .../StateMachines/Initialization/InitSequence.c    |  25 +-
 31 files changed, 742 insertions(+), 295 deletions(-)

(limited to 'Software/Embedded_SW/Embedded/Modules/Thread')

diff --git a/Software/Embedded_SW/Embedded/.cproject b/Software/Embedded_SW/Embedded/.cproject
index ae0630bbb..2dfc05eca 100644
--- a/Software/Embedded_SW/Embedded/.cproject
+++ b/Software/Embedded_SW/Embedded/.cproject
@@ -329,7 +329,6 @@
 								<option id="com.ti.ccstudio.buildDefinitions.TMS470_16.9.compilerID.OPT_LEVEL.1631295487" name="Optimization level (--opt_level, -O)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_16.9.compilerID.OPT_LEVEL" value="com.ti.ccstudio.buildDefinitions.TMS470_16.9.compilerID.OPT_LEVEL.off" valueType="enumerated"/>
 								<option id="com.ti.ccstudio.buildDefinitions.TMS470_16.9.compilerID.OPT_FOR_SPEED.168196449" name="Speed vs. size trade-offs (--opt_for_speed, -mf)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_16.9.compilerID.OPT_FOR_SPEED" value="com.ti.ccstudio.buildDefinitions.TMS470_16.9.compilerID.OPT_FOR_SPEED.0" valueType="enumerated"/>
 								<option id="com.ti.ccstudio.buildDefinitions.TMS470_16.9.compilerID.INCLUDE_PATH.1041853299" name="Add dir to #include search path (--include_path, -I)" superClass="com.ti.ccstudio.buildDefinitions.TMS470_16.9.compilerID.INCLUDE_PATH" valueType="includePath">
-									<listOptionValue builtIn="false" value=""/>
 									<listOptionValue builtIn="false" value="&quot;${COM_TI_RTSC_TIRTOSTIVAC_INSTALL_DIR}/products/ndk_2_25_00_09/packages/ti/ndk/inc/bsd&quot;"/>
 									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}}/Common/protobuf-c&quot;"/>
 									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}}&quot;"/>
@@ -337,6 +336,8 @@
 									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}}/Communication/PMR/Printing&quot;"/>
 									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}}/Communication/PMR/Common&quot;"/>
 									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}}/Communication/PMR/Debugging&quot;"/>
+									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}}/Communication/PMR/Diagnostics&quot;"/>
+									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}}/Communication/PMR/EmbeddedParameters&quot;"/>
 									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}}/Communication/PMR&quot;"/>
 									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}/Communication}&quot;"/>
 									<listOptionValue builtIn="false" value="&quot;${workspace_loc:/${ProjName}/Common}&quot;"/>
diff --git a/Software/Embedded_SW/Embedded/Common/SW_Info/SW_Info.c b/Software/Embedded_SW/Embedded/Common/SW_Info/SW_Info.c
index 336cfd9aa..59d40c8e5 100644
--- a/Software/Embedded_SW/Embedded/Common/SW_Info/SW_Info.c
+++ b/Software/Embedded_SW/Embedded/Common/SW_Info/SW_Info.c
@@ -20,7 +20,7 @@ typedef struct
 } TangoVersion_t;
 
 
-TangoVersion_t _gTangoVersion = {1,3,8,0};
+TangoVersion_t _gTangoVersion = {1,3,8,1};
 #define BUILD_DATE __DATE__
 char Dat[50] = BUILD_DATE; 
  char _gTangoName [MAX_STRING_LEN] = "Tango01 ";//d
diff --git a/Software/Embedded_SW/Embedded/Communication/PMR/Debugging/DebugLogCategory.pb-c.c b/Software/Embedded_SW/Embedded/Communication/PMR/Debugging/DebugLogCategory.pb-c.c
index b651d2acb..ebb901ba8 100644
--- a/Software/Embedded_SW/Embedded/Communication/PMR/Debugging/DebugLogCategory.pb-c.c
+++ b/Software/Embedded_SW/Embedded/Communication/PMR/Debugging/DebugLogCategory.pb-c.c
@@ -13,7 +13,7 @@ static const ProtobufCEnumValue debug_log_category__enum_values_by_number[5] =
   { "Warning", "DEBUG_LOG_CATEGORY__Warning", 1 },
   { "Error", "DEBUG_LOG_CATEGORY__Error", 2 },
   { "Critical", "DEBUG_LOG_CATEGORY__Critical", 3 },
-  { "Safety", "DEBUG_LOG_CATEGORY__Safety", 4 },
+  { "Debug", "DEBUG_LOG_CATEGORY__Debug", 4 },
 };
 static const ProtobufCIntRange debug_log_category__value_ranges[] = {
 {0, 0},{0, 5}
@@ -21,9 +21,9 @@ static const ProtobufCIntRange debug_log_category__value_ranges[] = {
 static const ProtobufCEnumValueIndex debug_log_category__enum_values_by_name[5] =
 {
   { "Critical", 3 },
+  { "Debug", 4 },
   { "Error", 2 },
   { "Info", 0 },
-  { "Safety", 4 },
   { "Warning", 1 },
 };
 const ProtobufCEnumDescriptor debug_log_category__descriptor =
diff --git a/Software/Embedded_SW/Embedded/Communication/PMR/EmbeddedParameters/AlarmSourceType.pb-c.c b/Software/Embedded_SW/Embedded/Communication/PMR/EmbeddedParameters/AlarmSourceType.pb-c.c
index 59509c39e..4167a9599 100644
--- a/Software/Embedded_SW/Embedded/Communication/PMR/EmbeddedParameters/AlarmSourceType.pb-c.c
+++ b/Software/Embedded_SW/Embedded/Communication/PMR/EmbeddedParameters/AlarmSourceType.pb-c.c
@@ -7,7 +7,7 @@
 #endif
 
 #include "AlarmSourceType.pb-c.h"
-static const ProtobufCEnumValue alarm_source_type__enum_values_by_number[7] =
+static const ProtobufCEnumValue alarm_source_type__enum_values_by_number[10] =
 {
   { "TemperatureAlarm", "ALARM_SOURCE_TYPE__TemperatureAlarm", 0 },
   { "LimitSwitchAlarm", "ALARM_SOURCE_TYPE__LimitSwitchAlarm", 1 },
@@ -16,18 +16,24 @@ static const ProtobufCEnumValue alarm_source_type__enum_values_by_number[7] =
   { "MotorAlarm", "ALARM_SOURCE_TYPE__MotorAlarm", 4 },
   { "CoversAlarm", "ALARM_SOURCE_TYPE__CoversAlarm", 5 },
   { "DoNotPollAlarm", "ALARM_SOURCE_TYPE__DoNotPollAlarm", 6 },
+  { "HardLimitAlarm", "ALARM_SOURCE_TYPE__HardLimitAlarm", 7 },
+  { "TachoAlarm", "ALARM_SOURCE_TYPE__TachoAlarm", 8 },
+  { "FluidLevelAlarm", "ALARM_SOURCE_TYPE__FluidLevelAlarm", 9 },
 };
 static const ProtobufCIntRange alarm_source_type__value_ranges[] = {
-{0, 0},{0, 7}
+{0, 0},{0, 10}
 };
-static const ProtobufCEnumValueIndex alarm_source_type__enum_values_by_name[7] =
+static const ProtobufCEnumValueIndex alarm_source_type__enum_values_by_name[10] =
 {
   { "CoversAlarm", 5 },
   { "CurrentAlarm", 3 },
   { "DoNotPollAlarm", 6 },
+  { "FluidLevelAlarm", 9 },
+  { "HardLimitAlarm", 7 },
   { "LimitSwitchAlarm", 1 },
   { "MotorAlarm", 4 },
   { "PressureAlarm", 2 },
+  { "TachoAlarm", 8 },
   { "TemperatureAlarm", 0 },
 };
 const ProtobufCEnumDescriptor alarm_source_type__descriptor =
@@ -37,9 +43,9 @@ const ProtobufCEnumDescriptor alarm_source_type__descriptor =
   "AlarmSourceType",
   "AlarmSourceType",
   "",
-  7,
+  10,
   alarm_source_type__enum_values_by_number,
-  7,
+  10,
   alarm_source_type__enum_values_by_name,
   1,
   alarm_source_type__value_ranges,
diff --git a/Software/Embedded_SW/Embedded/Communication/PMR/EmbeddedParameters/AlarmSourceType.pb-c.h b/Software/Embedded_SW/Embedded/Communication/PMR/EmbeddedParameters/AlarmSourceType.pb-c.h
index 2f6135176..4c7d0f91e 100644
--- a/Software/Embedded_SW/Embedded/Communication/PMR/EmbeddedParameters/AlarmSourceType.pb-c.h
+++ b/Software/Embedded_SW/Embedded/Communication/PMR/EmbeddedParameters/AlarmSourceType.pb-c.h
@@ -26,7 +26,10 @@ typedef enum _AlarmSourceType {
   ALARM_SOURCE_TYPE__CurrentAlarm = 3,
   ALARM_SOURCE_TYPE__MotorAlarm = 4,
   ALARM_SOURCE_TYPE__CoversAlarm = 5,
-  ALARM_SOURCE_TYPE__DoNotPollAlarm = 6
+  ALARM_SOURCE_TYPE__DoNotPollAlarm = 6,
+  ALARM_SOURCE_TYPE__HardLimitAlarm = 7,
+  ALARM_SOURCE_TYPE__TachoAlarm = 8,
+  ALARM_SOURCE_TYPE__FluidLevelAlarm = 9
     PROTOBUF_C__FORCE_ENUM_TO_BE_INT_SIZE(ALARM_SOURCE_TYPE)
 } AlarmSourceType;
 
diff --git a/Software/Embedded_SW/Embedded/Communication/PMR/EmbeddedParameters/ConfigurationParameters.pb-c.c b/Software/Embedded_SW/Embedded/Communication/PMR/EmbeddedParameters/ConfigurationParameters.pb-c.c
index b5e08ea1f..c4c74c826 100644
--- a/Software/Embedded_SW/Embedded/Communication/PMR/EmbeddedParameters/ConfigurationParameters.pb-c.c
+++ b/Software/Embedded_SW/Embedded/Communication/PMR/EmbeddedParameters/ConfigurationParameters.pb-c.c
@@ -52,7 +52,7 @@ void   configuration_parameters__free_unpacked
   assert(message->base.descriptor == &configuration_parameters__descriptor);
   protobuf_c_message_free_unpacked ((ProtobufCMessage*)message, allocator);
 }
-static const ProtobufCFieldDescriptor configuration_parameters__field_descriptors[21] =
+static const ProtobufCFieldDescriptor configuration_parameters__field_descriptors[29] =
 {
   {
     "BreakSensorLimit",
@@ -306,12 +306,110 @@ static const ProtobufCFieldDescriptor configuration_parameters__field_descriptor
     0,             /* flags */
     0,NULL,NULL    /* reserved1,reserved2, etc */
   },
+  {
+    "CurrentAlarmLowLimit",
+    22,
+    PROTOBUF_C_LABEL_OPTIONAL,
+    PROTOBUF_C_TYPE_DOUBLE,
+    offsetof(ConfigurationParameters, has_currentalarmlowlimit),
+    offsetof(ConfigurationParameters, currentalarmlowlimit),
+    NULL,
+    NULL,
+    0,             /* flags */
+    0,NULL,NULL    /* reserved1,reserved2, etc */
+  },
+  {
+    "CurrentAlarmHighLimit",
+    23,
+    PROTOBUF_C_LABEL_OPTIONAL,
+    PROTOBUF_C_TYPE_DOUBLE,
+    offsetof(ConfigurationParameters, has_currentalarmhighlimit),
+    offsetof(ConfigurationParameters, currentalarmhighlimit),
+    NULL,
+    NULL,
+    0,             /* flags */
+    0,NULL,NULL    /* reserved1,reserved2, etc */
+  },
+  {
+    "IDS_SegmentRefillTimeout",
+    24,
+    PROTOBUF_C_LABEL_OPTIONAL,
+    PROTOBUF_C_TYPE_DOUBLE,
+    offsetof(ConfigurationParameters, has_ids_segmentrefilltimeout),
+    offsetof(ConfigurationParameters, ids_segmentrefilltimeout),
+    NULL,
+    NULL,
+    0,             /* flags */
+    0,NULL,NULL    /* reserved1,reserved2, etc */
+  },
+  {
+    "IDS_PreSegmentBuildupTime",
+    25,
+    PROTOBUF_C_LABEL_OPTIONAL,
+    PROTOBUF_C_TYPE_DOUBLE,
+    offsetof(ConfigurationParameters, has_ids_presegmentbuilduptime),
+    offsetof(ConfigurationParameters, ids_presegmentbuilduptime),
+    NULL,
+    NULL,
+    0,             /* flags */
+    0,NULL,NULL    /* reserved1,reserved2, etc */
+  },
+  {
+    "IDS_CleaningSpeed",
+    26,
+    PROTOBUF_C_LABEL_OPTIONAL,
+    PROTOBUF_C_TYPE_DOUBLE,
+    offsetof(ConfigurationParameters, has_ids_cleaningspeed),
+    offsetof(ConfigurationParameters, ids_cleaningspeed),
+    NULL,
+    NULL,
+    0,             /* flags */
+    0,NULL,NULL    /* reserved1,reserved2, etc */
+  },
+  {
+    "IDS_CleaningStopBeforeSegmentTime",
+    27,
+    PROTOBUF_C_LABEL_OPTIONAL,
+    PROTOBUF_C_TYPE_DOUBLE,
+    offsetof(ConfigurationParameters, has_ids_cleaningstopbeforesegmenttime),
+    offsetof(ConfigurationParameters, ids_cleaningstopbeforesegmenttime),
+    NULL,
+    NULL,
+    0,             /* flags */
+    0,NULL,NULL    /* reserved1,reserved2, etc */
+  },
+  {
+    "IDS_LeftCleaningMotorSpeed",
+    28,
+    PROTOBUF_C_LABEL_OPTIONAL,
+    PROTOBUF_C_TYPE_DOUBLE,
+    offsetof(ConfigurationParameters, has_ids_leftcleaningmotorspeed),
+    offsetof(ConfigurationParameters, ids_leftcleaningmotorspeed),
+    NULL,
+    NULL,
+    0,             /* flags */
+    0,NULL,NULL    /* reserved1,reserved2, etc */
+  },
+  {
+    "IDS_RightCleaningMotorSpeed",
+    29,
+    PROTOBUF_C_LABEL_OPTIONAL,
+    PROTOBUF_C_TYPE_DOUBLE,
+    offsetof(ConfigurationParameters, has_ids_rightcleaningmotorspeed),
+    offsetof(ConfigurationParameters, ids_rightcleaningmotorspeed),
+    NULL,
+    NULL,
+    0,             /* flags */
+    0,NULL,NULL    /* reserved1,reserved2, etc */
+  },
 };
 static const unsigned configuration_parameters__field_indices_by_name[] = {
   13,   /* field[13] = ACHeatersLowerOperationLimit */
   14,   /* field[14] = ACHeatersUpperOperationLimit */
   0,   /* field[0] = BreakSensorLimit */
   4,   /* field[4] = CloseValveTimeout */
+  22,   /* field[22] = CurrentAlarmHighLimit */
+  21,   /* field[21] = CurrentAlarmLowLimit */
   15,   /* field[15] = DCHeatersLowerOperationLimit */
   16,   /* field[16] = DCHeatersUpperOperationLimit */
   1,   /* field[1] = DiagnosticCollectionLimit */
@@ -321,6 +419,12 @@ static const unsigned configuration_parameters__field_indices_by_name[] = {
   11,   /* field[11] = DispenserBuildPressureTimeout */
   18,   /* field[18] = DispenserPresegmentWFCF */
   20,   /* field[20] = GeneralParameters */
+  25,   /* field[25] = IDS_CleaningSpeed */
+  26,   /* field[26] = IDS_CleaningStopBeforeSegmentTime */
+  27,   /* field[27] = IDS_LeftCleaningMotorSpeed */
+  24,   /* field[24] = IDS_PreSegmentBuildupTime */
+  28,   /* field[28] = IDS_RightCleaningMotorSpeed */
+  23,   /* field[23] = IDS_SegmentRefillTimeout */
   6,   /* field[6] = InitialDispenserPressure */
   8,   /* field[8] = InitialDispenserTimeLag */
   7,   /* field[7] = InitialDispenserTimeout */
@@ -333,7 +437,7 @@ static const unsigned configuration_parameters__field_indices_by_name[] = {
 static const ProtobufCIntRange configuration_parameters__number_ranges[1 + 1] =
 {
   { 1, 0 },
-  { 0, 21 }
+  { 0, 29 }
 };
 const ProtobufCMessageDescriptor configuration_parameters__descriptor =
 {
@@ -343,7 +447,7 @@ const ProtobufCMessageDescriptor configuration_parameters__descriptor =
   "ConfigurationParameters",
   "",
   sizeof(ConfigurationParameters),
-  21,
+  29,
   configuration_parameters__field_descriptors,
   configuration_parameters__field_indices_by_name,
   1,  configuration_parameters__number_ranges,
diff --git a/Software/Embedded_SW/Embedded/Communication/PMR/EmbeddedParameters/ConfigurationParameters.pb-c.h b/Software/Embedded_SW/Embedded/Communication/PMR/EmbeddedParameters/ConfigurationParameters.pb-c.h
index 3911bbcb1..1b729c0d0 100644
--- a/Software/Embedded_SW/Embedded/Communication/PMR/EmbeddedParameters/ConfigurationParameters.pb-c.h
+++ b/Software/Embedded_SW/Embedded/Communication/PMR/EmbeddedParameters/ConfigurationParameters.pb-c.h
@@ -68,10 +68,26 @@ struct  _ConfigurationParameters
   protobuf_c_boolean startheatingoninitsequence;
   size_t n_generalparameters;
   double *generalparameters;
+  protobuf_c_boolean has_currentalarmlowlimit;
+  double currentalarmlowlimit;
+  protobuf_c_boolean has_currentalarmhighlimit;
+  double currentalarmhighlimit;
+  protobuf_c_boolean has_ids_segmentrefilltimeout;
+  double ids_segmentrefilltimeout;
+  protobuf_c_boolean has_ids_presegmentbuilduptime;
+  double ids_presegmentbuilduptime;
+  protobuf_c_boolean has_ids_cleaningspeed;
+  double ids_cleaningspeed;
+  protobuf_c_boolean has_ids_cleaningstopbeforesegmenttime;
+  double ids_cleaningstopbeforesegmenttime;
+  protobuf_c_boolean has_ids_leftcleaningmotorspeed;
+  double ids_leftcleaningmotorspeed;
+  protobuf_c_boolean has_ids_rightcleaningmotorspeed;
+  double ids_rightcleaningmotorspeed;
 };
 #define CONFIGURATION_PARAMETERS__INIT \
  { PROTOBUF_C_MESSAGE_INIT (&configuration_parameters__descriptor) \
-    , 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,NULL }
+    , 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,NULL, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
 
 
 /* ConfigurationParameters methods */
diff --git a/Software/Embedded_SW/Embedded/Communication/PMR/Printing/JobTicket.pb-c.c b/Software/Embedded_SW/Embedded/Communication/PMR/Printing/JobTicket.pb-c.c
index d624cee6a..a47ff627b 100644
--- a/Software/Embedded_SW/Embedded/Communication/PMR/Printing/JobTicket.pb-c.c
+++ b/Software/Embedded_SW/Embedded/Communication/PMR/Printing/JobTicket.pb-c.c
@@ -52,7 +52,7 @@ void   job_ticket__free_unpacked
   assert(message->base.descriptor == &job_ticket__descriptor);
   protobuf_c_message_free_unpacked ((ProtobufCMessage*)message, allocator);
 }
-static const ProtobufCFieldDescriptor job_ticket__field_descriptors[11] =
+static const ProtobufCFieldDescriptor job_ticket__field_descriptors[12] =
 {
   {
     "Guid",
@@ -186,9 +186,22 @@ static const ProtobufCFieldDescriptor job_ticket__field_descriptors[11] =
     0,             /* flags */
     0,NULL,NULL    /* reserved1,reserved2, etc */
   },
+  {
+    "EnableLubrication",
+    12,
+    PROTOBUF_C_LABEL_OPTIONAL,
+    PROTOBUF_C_TYPE_BOOL,
+    offsetof(JobTicket, has_enablelubrication),
+    offsetof(JobTicket, enablelubrication),
+    NULL,
+    NULL,
+    0,             /* flags */
+    0,NULL,NULL    /* reserved1,reserved2, etc */
+  },
 };
 static const unsigned job_ticket__field_indices_by_name[] = {
   2,   /* field[2] = EnableInterSegment */
+  11,   /* field[11] = EnableLubrication */
   0,   /* field[0] = Guid */
   3,   /* field[3] = InterSegmentLength */
   10,   /* field[10] = JobDescriptionFile */
@@ -203,7 +216,7 @@ static const unsigned job_ticket__field_indices_by_name[] = {
 static const ProtobufCIntRange job_ticket__number_ranges[1 + 1] =
 {
   { 1, 0 },
-  { 0, 11 }
+  { 0, 12 }
 };
 const ProtobufCMessageDescriptor job_ticket__descriptor =
 {
@@ -213,7 +226,7 @@ const ProtobufCMessageDescriptor job_ticket__descriptor =
   "JobTicket",
   "",
   sizeof(JobTicket),
-  11,
+  12,
   job_ticket__field_descriptors,
   job_ticket__field_indices_by_name,
   1,  job_ticket__number_ranges,
diff --git a/Software/Embedded_SW/Embedded/Communication/PMR/Printing/JobTicket.pb-c.h b/Software/Embedded_SW/Embedded/Communication/PMR/Printing/JobTicket.pb-c.h
index 6e6794e63..bf75643a9 100644
--- a/Software/Embedded_SW/Embedded/Communication/PMR/Printing/JobTicket.pb-c.h
+++ b/Software/Embedded_SW/Embedded/Communication/PMR/Printing/JobTicket.pb-c.h
@@ -48,10 +48,12 @@ struct  _JobTicket
   protobuf_c_boolean has_uploadstrategy;
   JobUploadStrategy uploadstrategy;
   char *jobdescriptionfile;
+  protobuf_c_boolean has_enablelubrication;
+  protobuf_c_boolean enablelubrication;
 };
 #define JOB_TICKET__INIT \
  { PROTOBUF_C_MESSAGE_INIT (&job_ticket__descriptor) \
-    , NULL, NULL, 0, 0, 0, 0, 0, 0, NULL, 0, JOB_WINDING_METHOD__Embroidery, NULL, 0,NULL, 0, JOB_UPLOAD_STRATEGY__Default, NULL }
+    , NULL, NULL, 0, 0, 0, 0, 0, 0, NULL, 0, JOB_WINDING_METHOD__Embroidery, NULL, 0,NULL, 0, JOB_UPLOAD_STRATEGY__Default, NULL, 0, 0 }
 
 
 /* JobTicket methods */
diff --git a/Software/Embedded_SW/Embedded/Drivers/FPGA/FPGA_SPI_Comm.c b/Software/Embedded_SW/Embedded/Drivers/FPGA/FPGA_SPI_Comm.c
index 87a1515af..ea5161b15 100644
--- a/Software/Embedded_SW/Embedded/Drivers/FPGA/FPGA_SPI_Comm.c
+++ b/Software/Embedded_SW/Embedded/Drivers/FPGA/FPGA_SPI_Comm.c
@@ -371,11 +371,13 @@ int MotorSendFPGARequest(TimerMotors_t MotorId,uint32_t Data, uint32_t Length)
 //    if (MotorDataIndex[MotorId] == 99) MotorDataIndex[MotorId] = 0;
     //if((*FpgaMotMap[MotorId].NBUSY == NOTBUSY) && (*FpgaMotMap[MotorId].SPI_Busy == NOTBUSY))
     {
+        ROM_IntMasterDisable();
         Int2Short.uint = Data;
 
         *FpgaMotMap[MotorId].TX_01 = Int2Short.ushort.MSB;
         *FpgaMotMap[MotorId].TX_00 = Int2Short.ushort.LSB;
         //*FpgaMotMap[MotorId].WORDS = Length;
+        ROM_IntMasterEnable();
 
         return OK;
     }
diff --git a/Software/Embedded_SW/Embedded/Drivers/FPGA/Full_Vme/ispvme/ispvm_ui.c b/Software/Embedded_SW/Embedded/Drivers/FPGA/Full_Vme/ispvme/ispvm_ui.c
index a18d5bb76..c216b9aad 100644
--- a/Software/Embedded_SW/Embedded/Drivers/FPGA/Full_Vme/ispvme/ispvm_ui.c
+++ b/Software/Embedded_SW/Embedded/Drivers/FPGA/Full_Vme/ispvme/ispvm_ui.c
@@ -38,7 +38,7 @@
 * 08/28/08 NN Added Calculate checksum support.
 ***************************************************************/
 
-#include "Include.h"
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -53,8 +53,6 @@
 
 FILE * g_pVMEFile = NULL;
 
-uint32_t vme_index = 0;
-
 /***************************************************************
 *
 * Functions declared in this ispvm_ui.c module
@@ -199,8 +197,6 @@ unsigned char GetByte()
 	    ucData = s[0];
 	    ////////
 
-
-
 		//if ( feof( g_pVMEFile ) )  avi-
 	    if(rc == 0) //avi+
 		{
@@ -216,11 +212,6 @@ unsigned char GetByte()
 
 
 		}
-	    else
-	    {
-	        vme_index++;
-	    }
-
 		/***************************************************************
 		*
 		* Calculate the 32-bit CRC if the expected CRC exist.
diff --git a/Software/Embedded_SW/Embedded/Drivers/FPGA/Full_Vme/ispvme/ivm_core.c b/Software/Embedded_SW/Embedded/Drivers/FPGA/Full_Vme/ispvme/ivm_core.c
index b4613b7d3..62a2b3b0e 100644
--- a/Software/Embedded_SW/Embedded/Drivers/FPGA/Full_Vme/ispvme/ivm_core.c
+++ b/Software/Embedded_SW/Embedded/Drivers/FPGA/Full_Vme/ispvme/ivm_core.c
@@ -22,7 +22,7 @@
 *        the ispVMLCOUNT function
 * 
 ***************************************************************/
-#include "Include.h"
+
 #include <stdio.h>
 #include <string.h>
 #include "vmopcode.h"
diff --git a/Software/Embedded_SW/Embedded/Drivers/FPGA/Full_Vme/ispvme/vmopcode.h b/Software/Embedded_SW/Embedded/Drivers/FPGA/Full_Vme/ispvme/vmopcode.h
index a6b5af2f1..cdd05fd12 100644
--- a/Software/Embedded_SW/Embedded/Drivers/FPGA/Full_Vme/ispvme/vmopcode.h
+++ b/Software/Embedded_SW/Embedded/Drivers/FPGA/Full_Vme/ispvme/vmopcode.h
@@ -206,5 +206,3 @@ typedef struct {
 	unsigned short usNegativeIndex;
 	unsigned char  ucUpdate;
 } LVDSPair;
-
-extern uint32_t vme_index;
diff --git a/Software/Embedded_SW/Embedded/Drivers/I2C_Communication/ADC_MUX/ADC_MUX.c b/Software/Embedded_SW/Embedded/Drivers/I2C_Communication/ADC_MUX/ADC_MUX.c
index 082981bee..ed41223ae 100644
--- a/Software/Embedded_SW/Embedded/Drivers/I2C_Communication/ADC_MUX/ADC_MUX.c
+++ b/Software/Embedded_SW/Embedded/Drivers/I2C_Communication/ADC_MUX/ADC_MUX.c
@@ -240,6 +240,11 @@ double Get_MidTank_Pressure_Sensor(MidTank_t MidTank_ID) //0-7
     assert (MidTank_ID<NUM_OF_MIDTANKS);
     return MidTank_Pressure[MidTank_ID];
 }
+int Get_MidTank_Int100_Sensor(MidTank_t MidTank_ID) //0-7
+{
+    assert (MidTank_ID<NUM_OF_MIDTANKS);
+    return (int)(MidTank_Pressure[MidTank_ID]*100);
+}
 
 /////////////////////////  Head_MixChip_Heaters_Current //////////////////////////////
 
diff --git a/Software/Embedded_SW/Embedded/Drivers/I2C_Communication/ADC_MUX/ADC_MUX.h b/Software/Embedded_SW/Embedded/Drivers/I2C_Communication/ADC_MUX/ADC_MUX.h
index f30f587b3..0f64cebb9 100644
--- a/Software/Embedded_SW/Embedded/Drivers/I2C_Communication/ADC_MUX/ADC_MUX.h
+++ b/Software/Embedded_SW/Embedded/Drivers/I2C_Communication/ADC_MUX/ADC_MUX.h
@@ -45,6 +45,7 @@ extern uint32_t Heaters_Current_Bits[9];
 
 uint32_t Read_MidTank_Pressure_Sensor(MidTank_t MidTank_ID);
 double Get_MidTank_Pressure_Sensor(MidTank_t MidTank_ID); //0-7
+int Get_MidTank_Int100_Sensor(MidTank_t MidTank_ID); //0-7
 void MidTankPressureCorrection(double Offset);
 
 void Enable_MidTank_Pressure_Reading(MidTank_t MidTank_ID); //0-7
diff --git a/Software/Embedded_SW/Embedded/Drivers/Motors/Motor.h b/Software/Embedded_SW/Embedded/Drivers/Motors/Motor.h
index 7599c10db..ecc70765b 100644
--- a/Software/Embedded_SW/Embedded/Drivers/Motors/Motor.h
+++ b/Software/Embedded_SW/Embedded/Drivers/Motors/Motor.h
@@ -201,6 +201,7 @@ uint32_t MotorMovetoBreakSensor (TimerMotors_t _motorId,bool direction, uint32_t
 uint32_t MotorMovetoDancerPosition (TimerMotors_t _motorId,bool direction, uint32_t Freq,uint32_t DancerId,bool dancervaluedirection,  callback_fptr callback,uint32_t timeout);
 uint32_t MotorAbortMovetoLimitSwitch (TimerMotors_t _motorId);
 uint32_t MotorMoveToStopper (TimerMotors_t _motorId,bool direction, uint32_t Speed, callback_fptr callback,uint32_t backlash,uint32_t timeout);
+uint32_t MotorMovetoEncoderPosition (TimerMotors_t MotorId,  callback_fptr callback,uint32_t timeout);
 
 uint32_t MotorGoTo(TimerMotors_t _motorIdn, uint32_t Steps);
 #endif /* DRIVERS_MOTOR_H_ */
diff --git a/Software/Embedded_SW/Embedded/Drivers/Motors/MotorActions.c b/Software/Embedded_SW/Embedded/Drivers/Motors/MotorActions.c
index 75870d4f7..053f8ac46 100644
--- a/Software/Embedded_SW/Embedded/Drivers/Motors/MotorActions.c
+++ b/Software/Embedded_SW/Embedded/Drivers/Motors/MotorActions.c
@@ -166,6 +166,7 @@ uint32_t MotorMoveWithCallback (TimerMotors_t MotorId,bool direction, uint32_t S
     return MotorControlId[MotorId];
 }
 uint32_t DryerBackLash = 0;
+uint32_t DrierZeroPosition = 0;
 bool     DrierBackLashDirection = false;
 int CallbackCalls=0;
 bool FirstCall = false;
@@ -193,25 +194,29 @@ uint32_t MotorVerifiedCallBackFunction(uint32_t IfIndex, uint32_t ArmPosition) /
     }
     Report("Move_To_Stopper_Callback",__FILE__,__LINE__,MotorPosition,RpMessage,StoredMotorPosition[MotorId],0);
 
-       //if (((abs(MotorPosition - StoredMotorPosition[MotorId])<=60)||(MotorGetDirection(MotorId)!=(1-DrierBackLashDirection)))&&(CallbackCalls>=10)) /*Motor did not move in the last time lag*/
-        if (abs(MotorPosition - StoredMotorPosition[MotorId])<=10)
-        {
-           //stop this control loop
-           REPORT_MSG(MotorPosition,"MotorVerifiedCallBackFunction stopped");
-           SafeRemoveControlCallback(MotorControlId[MotorId], MotorControlCallback[MotorId] );
-           MotorControlCallback[MotorId] = 0;
-           MotorControlId[MotorId] = 0xFF;
-           MotorStop(MotorId,Hard_Hiz );
-           Task_sleep(5);
-           MotorMove(MotorId,DrierBackLashDirection,DryerBackLash );
-           Task_sleep(5);
+    Read_Dryer_ENC_Position(); //trigger the next call
 
-           //call the module callback
-           if (MotorCallback[MotorId])
-               MotorCallback[MotorId](MotorId,ArmPosition);
+   //if (((abs(MotorPosition - StoredMotorPosition[MotorId])<=60)||(MotorGetDirection(MotorId)!=(1-DrierBackLashDirection)))&&(CallbackCalls>=10)) /*Motor did not move in the last time lag*/
+    if (abs(MotorPosition - StoredMotorPosition[MotorId])<=10)
+    {
+       //stop this control loop
+       REPORT_MSG(MotorPosition,"MotorVerifiedCallBackFunction stopped");
+       SafeRemoveControlCallback(MotorControlId[MotorId], MotorControlCallback[MotorId] );
+       MotorControlCallback[MotorId] = 0;
+       MotorControlId[MotorId] = 0xFF;
+       MotorStop(MotorId,Hard_Hiz );
+       Task_sleep(5);
+       MotorMove(MotorId,DrierBackLashDirection,DryerBackLash );
+       Task_sleep(5);
+       DrierZeroPosition = Read_Dryer_ENC_Position(); //trigger the next call
+       Report("MotorVerifiedCallBackFunction",__FILE__,__LINE__,DrierZeroPosition,RpWarning,0,0);
 
-       }
-       else StoredMotorPosition[MotorId] = MotorPosition;
+       //call the module callback
+       if (MotorCallback[MotorId])
+           MotorCallback[MotorId](MotorId,ArmPosition);
+
+   }
+   else StoredMotorPosition[MotorId] = MotorPosition;
 
    return OK;
 }
@@ -236,10 +241,87 @@ uint32_t MotorMoveToStopper (TimerMotors_t MotorId,bool direction, uint32_t Spee
     StoredMotorPosition[MotorId] = MotorGetPosition(MotorId);
     REPORT_MSG(StoredMotorPosition[MotorId],"MotorMoveToStopper initial position");
     MotorSetSpeed (MotorId, Speed);
-    MotorControlId[MotorId] = AddControlCallback( MotorVerifiedCallBackFunction,  /*eTenMillisecond*/50, Read_Dryer_ENC_Position,(IfTypeMotors*0x100+MotorId), MotorId, 0 );
+    MotorControlId[MotorId] = AddControlCallback( MotorVerifiedCallBackFunction,  20,Control_Read_Dryer_Position,(IfTypeMotors*0x100+MotorId), MotorId, 0 );
     MotorControlCallback[MotorId] = MotorVerifiedCallBackFunction;
     return MotorControlId[MotorId];
 }
+uint32_t MotorMoveToDrierPositionCallBackFunction(uint32_t IfIndex, uint32_t ReadValue) //TODO
+{
+    TimerMotors_t MotorId;
+    if (IfIndex>>8 != IfTypeMotors)
+    {
+        LOG_ERROR (IfIndex, "Wrong  Interface type");
+        return 0xFFFFFFFF;
+    }
+    MotorId = (TimerMotors_t)(IfIndex&0xFF);
+
+    if (MotorControlId[MotorId] == 0xFF)
+        return ERROR;
+    Report("MotorMoveToDrierPositionCallBackFunction",__FILE__,__LINE__,DrierZeroPosition,RpWarning,ReadValue,0);
+
+   if (DrierZeroPosition == ReadValue) //thread running identified
+   {
+       //stop this control loop
+       SafeRemoveControlCallback(MotorControlId[MotorId], MotorControlCallback[MotorId] );
+       MotorControlCallback[MotorId] = 0;
+       MotorControlId[MotorId] = 0xFF;
+       MotorStop(MotorId,Hard_Hiz);  //TODO in run time limit switch just reverse direction
+
+       //possibly: start regular control (speed etc)
+       //uint32_t ControlId = AddControlCallback(ControlCBFunction Callback,  eOneMillisecond, (IfTypeMotors*0x100+MotorId), deviceId, Parameter );
+
+       //call the module callback
+       if (MotorCallback[MotorId])
+           MotorCallback[MotorId](MotorId,ReadValue);
+   }
+   return OK;
+}
+uint32_t MotorMovetoEncoderPosition (TimerMotors_t MotorId,  callback_fptr callback,uint32_t timeout)
+{
+    assert (callback);
+    uint32_t currentposition = 0;
+    bool direction;
+    //assert (isValid(deviceId));
+
+    //call driver action to device id with the parameter
+    MotorCallback[MotorId] = callback;
+
+    //decide the required direction and  speed
+    Read_Dryer_ENC_Position();
+    MotorStop(MotorId,Hard_Hiz );
+
+    Task_sleep(5);
+    Read_Dryer_ENC_Position();
+    Task_sleep(5);
+    currentposition = Control_Read_Dryer_Position(0,0,0);
+    Report("MotorMovetoEncoderPosition",__FILE__,__LINE__,DrierZeroPosition,RpWarning,currentposition,0);
+
+    if (currentposition > DrierZeroPosition)
+    {
+        direction = false;
+    }
+    else
+    {
+        if (currentposition == DrierZeroPosition)
+        {
+            if (callback)
+                callback(MotorId,0);
+            return OK;
+        }
+        else
+        {
+            direction = true;
+        }
+    }
+
+    MotorSetDirection( MotorId, direction);
+    MotorSetSpeed (MotorId, 5);
+    MotorControlId[MotorId] = AddControlCallback( MotorMoveToDrierPositionCallBackFunction,  eOneMillisecond,Control_Read_Dryer_Position,(IfTypeMotors*0x100+MotorId), MotorId, 0 );
+    MotorControlCallback[MotorId] = MotorMoveToDrierPositionCallBackFunction;
+    return MotorControlId[MotorId];
+
+}
+
 uint32_t MotorSetSpeedWithCallback (TimerMotors_t MotorId, uint32_t _freq, callback_fptr callback) //TODO
 {
     assert (callback);
@@ -304,6 +386,8 @@ uint32_t MotorSetSpeedCallBackFunction(uint32_t IfIndex, uint32_t BusyFlag) //TO
        }
    return OK;
 }
+bool CloseMagnet = false;
+bool HoldRightDancer = false;
 uint32_t MotorMoveToLimitSwitchCallBackFunction(uint32_t IfIndex, uint32_t LimitSwitch) //TODO
 {
     TimerMotors_t MotorId;
@@ -324,11 +408,12 @@ uint32_t MotorMoveToLimitSwitchCallBackFunction(uint32_t IfIndex, uint32_t Limit
        SafeRemoveControlCallback(MotorControlId[MotorId], MotorControlCallback[MotorId] );
        MotorControlCallback[MotorId] = 0;
        MotorControlId[MotorId] = 0xFF;
-       /*if (MotorId == HARDWARE_MOTOR_TYPE__MOTO_RDANCER)
+       if ((MotorId == HARDWARE_MOTOR_TYPE__MOTO_RDANCER)&&(HoldRightDancer == true))
        {
+           HoldRightDancer = false;
            MotorStop(MotorId,Soft_Stop);  //TODO in run time limit switch just reverse direction
        }
-       else*/
+       else
        {
            MotorStop(MotorId,Hard_Hiz);  //TODO in run time limit switch just reverse direction
        }
@@ -336,8 +421,13 @@ uint32_t MotorMoveToLimitSwitchCallBackFunction(uint32_t IfIndex, uint32_t Limit
        //possibly: start regular control (speed etc)
        //uint32_t ControlId = AddControlCallback(ControlCBFunction Callback,  eOneMillisecond, (IfTypeMotors*0x100+MotorId), deviceId, Parameter );
        if (MotorId == HARDWARE_MOTOR_TYPE__MOTO_DH_LID)
-           ActivateHeadMagnet();
-
+       {
+           if (CloseMagnet == true)
+           {
+               ActivateHeadMagnet();
+               CloseMagnet=false;
+           }
+       }
        //call the module callback
        if (MotorCallback[MotorId])
            MotorCallback[MotorId](MotorId,LimitSwitch);
@@ -360,7 +450,20 @@ uint32_t MotorMovetoLimitSwitch (TimerMotors_t MotorId,bool direction, uint32_t
     //call driver action to device id with the parameter
     //SetMotorSpeed (deviceId, parameter);
     if (MotorId == HARDWARE_MOTOR_TYPE__MOTO_DH_LID)
+    {
         DeActivateHeadMagnet();
+        if (direction == MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_DH_LID].directionthreadwize)
+        {
+            CloseMagnet = true;
+        }
+    }
+    if (MotorId == HARDWARE_MOTOR_TYPE__MOTO_RDANCER)
+    {
+        if (direction != MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_RDANCER].directionthreadwize)
+        {
+            HoldRightDancer = true;
+        }
+    }
 
     MotorTimeout[MotorId] = 0;
     MotorTimeLag[MotorId] = eTenMillisecond;
@@ -483,6 +586,7 @@ uint32_t MotorMoveToDancerPositionCallBackFunction(uint32_t IfIndex, uint32_t Re
    }
    return OK;
 }
+
 uint32_t MotorMovetoDancerPosition (TimerMotors_t MotorId,bool direction, uint32_t Freq,uint32_t dancerid,bool dancervaluedirection,  callback_fptr callback,uint32_t timeout)
 {
     if (MotorControlId[MotorId] != 0xFF)
diff --git a/Software/Embedded_SW/Embedded/Embedded.cfg b/Software/Embedded_SW/Embedded/Embedded.cfg
index 89aff2c92..10cc8c75d 100644
--- a/Software/Embedded_SW/Embedded/Embedded.cfg
+++ b/Software/Embedded_SW/Embedded/Embedded.cfg
@@ -38,6 +38,7 @@ Program.global.portpint = Hwi.create(92, "&PortPIntHandler", hwi21Params);
 */
 var hwi13Params = new Hwi.Params();
 hwi13Params.instance.name = "timer0";
+hwi13Params.priority = 128;
 Program.global.timer0 = Hwi.create(35, "&OneMilliSecondControlInterrupt", hwi13Params);
 
 var hwi20Params = new Hwi.Params();
@@ -47,6 +48,7 @@ Program.global.watchdog = Hwi.create(34, "&WatchdogIntHandler", hwi20Params);
 var hwi15Params = new Hwi.Params();
 hwi15Params.instance.name = "timer2";
 hwi15Params.arg = 2;
+hwi15Params.priority = 160;
 Program.global.timer2 = Hwi.create(39, "&EightMilliSecondHeatersInterrupt", hwi15Params);
 
 /*var hwi5Params = new Hwi.Params();
@@ -55,6 +57,7 @@ Program.global.usb0 = Hwi.create(58, "&USBCDCD_hwiHandler", hwi5Params);*/
 
 var hwi6Params = new Hwi.Params();
 hwi6Params.instance.name = "timer1";
+hwi6Params.priority = 128;
 Program.global.timer1 = Hwi.create(37, "&MillisecInterrupt", hwi6Params);
 
 var hwi17Params = new Hwi.Params();
diff --git a/Software/Embedded_SW/Embedded/Main.c b/Software/Embedded_SW/Embedded/Main.c
index d1eb094eb..9626537ae 100644
--- a/Software/Embedded_SW/Embedded/Main.c
+++ b/Software/Embedded_SW/Embedded/Main.c
@@ -58,7 +58,6 @@
 
 #include "Drivers/I2C_Communication/I2C.h"
 
-//#include "Drivers/I2C_Communication/Dispensers_EEPROM_MUX/Disp_EEPROM_MUX.h"
 
 #include "drivers/FPGA/FPGA_GPIO/FPGA_GPIO.h"
 
diff --git a/Software/Embedded_SW/Embedded/Modules/AlarmHandling/AlarmHandling.c b/Software/Embedded_SW/Embedded/Modules/AlarmHandling/AlarmHandling.c
index 17b2c3664..ee6a88593 100644
--- a/Software/Embedded_SW/Embedded/Modules/AlarmHandling/AlarmHandling.c
+++ b/Software/Embedded_SW/Embedded/Modules/AlarmHandling/AlarmHandling.c
@@ -26,6 +26,7 @@
 #include "drivers/FPGA/FPGA.h"
 #include "PMR/Hardware/HardwareDancerType.pb-c.h"
 #include "drivers/I2C_Communication/ADC_MUX/ADC_MUX.h"
+#include "drivers/I2C_Communication/Dispenser_Card/IO_Ports/Dispenser_IO.h"
 
 #include "modules/thread/thread_ex.h"
 #include "modules/heaters/heaters_ex.h"
@@ -59,6 +60,7 @@ bool AlarmHandlingActive = false;
 uint32_t AlarmHandlingControlId = 0xFF;
 uint32_t AlarmHandlingTick = 0;
 
+bool    CheckHardLimitAlarms = false,CheckCurrentAlarms = false,CheckTamperAlarms = false;
 uint8_t alarm_response_buffer[500];
 
 /******************** Functions  ********************************************/
@@ -84,7 +86,7 @@ typedef struct AlarmHandlingMessage{
 }AlarmHandlingMessageStruc;
 
 #define MAX_SYSTEM_ALARMS 300+1
-typedef enum
+/*typedef enum
 {
     TemperatureAlarm,
     LimitSwitchAlarm,
@@ -93,13 +95,16 @@ typedef enum
     MotorAlarm,
     CoversAlarm,
     DoNotPollAlarm,
-}AlarmSource;
-#define OVER_VALUE true;
-#define UNDER_VALUE false;
+    HardLimitAlarm,
+    TachoAlarm,
+    FluidLevelAlarm,
+}AlarmSource;*/
+#define OVER_VALUE true
+#define UNDER_VALUE false
 typedef struct
 {
     uint16_t Frequency;  //1/10/100/1000
-    AlarmSource AlarmSource;
+    AlarmSourceType AlarmSource;
     uint16_t DeviceId;
     uint8_t ModuleDeviceId;
     uint16_t AlarmValue;
@@ -126,192 +131,211 @@ AlarmStatusItem  AlarmState[MAX_SYSTEM_ALARMS];
 */
 AlarmHandlingItemStruc  *AlarmItem;
 const AlarmHandlingItemStruc  HardCodedAlarmItem[MAX_SYSTEM_ALARMS]={
- {eHundredMillisecond,LimitSwitchAlarm,LimitSwitchAlarmEmpty_1,0,false,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DISPENSER_1_EMPTY,"Dispenser 1 Empty"},
- {eHundredMillisecond,LimitSwitchAlarm,LimitSwitchAlarmEmpty_2,1,false,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DISPENSER_2_EMPTY,"Dispenser 2 Empty"},
- {eHundredMillisecond,LimitSwitchAlarm,LimitSwitchAlarmEmpty_3,2,false,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DISPENSER_3_EMPTY,"Dispenser 3 Empty"},
- {eHundredMillisecond,LimitSwitchAlarm,LimitSwitchAlarmEmpty_4,3,false,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DISPENSER_4_EMPTY,"Dispenser 4 Empty"},
- {eHundredMillisecond,LimitSwitchAlarm,LimitSwitchAlarmEmpty_5,4,false,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DISPENSER_5_EMPTY,"Dispenser 5 Empty"},
- {eHundredMillisecond,LimitSwitchAlarm,LimitSwitchAlarmEmpty_6,5,false,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DISPENSER_6_EMPTY,"Dispenser 6 Empty"},
- {eHundredMillisecond,LimitSwitchAlarm,LimitSwitchAlarmEmpty_7,6,false,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DISPENSER_7_EMPTY,"Dispenser 7 Empty"},
- {eHundredMillisecond,LimitSwitchAlarm,LimitSwitchAlarmEmpty_8,7,false,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DISPENSER_8_EMPTY,"Dispenser 8 Empty"},
- {eOneSecond,PressureAlarm,0,0,5,true,DEBUG_LOG_CATEGORY__Error,0xFF,5,EVENT_TYPE__DISPENSER_1_OVERPRESSURE,"Dispenser 1 Over Pressure"},
- {eOneSecond,PressureAlarm,1,1,5,true,DEBUG_LOG_CATEGORY__Error,0xFF,5,EVENT_TYPE__DISPENSER_2_OVERPRESSURE,"Dispenser 2 Over Pressure"},
- {eOneSecond,PressureAlarm,2,2,5,true,DEBUG_LOG_CATEGORY__Error,0xFF,5,EVENT_TYPE__DISPENSER_3_OVERPRESSURE,"Dispenser 3 Over Pressure"},
- {eOneSecond,PressureAlarm,3,3,5,true,DEBUG_LOG_CATEGORY__Error,0xFF,5,EVENT_TYPE__DISPENSER_4_OVERPRESSURE,"Dispenser 4 Over Pressure"},
- {eOneSecond,PressureAlarm,4,4,5,true,DEBUG_LOG_CATEGORY__Error,0xFF,5,EVENT_TYPE__DISPENSER_5_OVERPRESSURE,"Dispenser 5 Over Pressure"},
- {eOneSecond,PressureAlarm,5,5,5,true,DEBUG_LOG_CATEGORY__Error,0xFF,5,EVENT_TYPE__DISPENSER_6_OVERPRESSURE,"Dispenser 6 Over Pressure"},
- {eOneSecond,PressureAlarm,6,6,5,true,DEBUG_LOG_CATEGORY__Error,0xFF,5,EVENT_TYPE__DISPENSER_7_OVERPRESSURE,"Dispenser 7 Over Pressure"},
- {eOneSecond,PressureAlarm,7,7,5,true,DEBUG_LOG_CATEGORY__Error,0xFF,5,EVENT_TYPE__DISPENSER_8_OVERPRESSURE,"Dispenser 8 Over Pressure"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DRYER_DRIVING,HARDWARE_MOTOR_TYPE__MOTO_DRYER_DRIVING,x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DRYER_MOTOR_OVERCURRENT,"MotorDryerOverCurrent"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_RDRIVING,     HARDWARE_MOTOR_TYPE__MOTO_RDRIVING,     x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__FEEDER_MOTOR_OVERCURRENT,"MotorFeederOverCurrent"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_SCREW,        HARDWARE_MOTOR_TYPE__MOTO_SCREW,        x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__SCREW_MOTOR_OVERCURRENT,"MotorScrewOverCurrent"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_WINDER,       HARDWARE_MOTOR_TYPE__MOTO_WINDER,       x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__WINDER_MOTOR_OVERCURRENT,"MotorWinderOverCurrent"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_LDRIVING,     HARDWARE_MOTOR_TYPE__MOTO_LDRIVING,     x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__PULLER_MOTOR_OVERCURRENT,"MotorPoolerOverCurrent"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_1,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_1,  x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_1_MOTOR_OVERCURRENT,"MotorDispenser1OverCurrent"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_2,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_2,  x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_2_MOTOR_OVERCURRENT,"MotorDispenser2OverCurrent"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_3,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_3,  x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_3_MOTOR_OVERCURRENT,"MotorDispenser3OverCurrent"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_4,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_4,  x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_4_MOTOR_OVERCURRENT,"MotorDispenser4OverCurrent"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_5,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_5,  x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_5_MOTOR_OVERCURRENT,"MotorDispenser5OverCurrent"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_6,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_6,  x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_6_MOTOR_OVERCURRENT,"MotorDispenser6OverCurrent"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_7,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_7,  x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_7_MOTOR_OVERCURRENT,"MotorDispenser7OverCurrent"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_8,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_8,  x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_8_MOTOR_OVERCURRENT,"MotorDispenser8OverCurrent"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DRYER_DRIVING,HARDWARE_MOTOR_TYPE__MOTO_DRYER_DRIVING,x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DRYER_MOTOR_OVERTEMPERATURE,"MotorDryerOverTemperature"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_RDRIVING,     HARDWARE_MOTOR_TYPE__MOTO_RDRIVING,     x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__FEEDER_MOTOR_OVERTEMPERATURE,"MotorFeederOverTemperature"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_SCREW,        HARDWARE_MOTOR_TYPE__MOTO_SCREW,        x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__SCREW_MOTOR_OVERTEMPERATURE,"MotorScrewOverTemperature"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_WINDER,       HARDWARE_MOTOR_TYPE__MOTO_WINDER,       x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__WINDER_MOTOR_OVERTEMPERATURE,"MotorWinderOverTemperature"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_LDRIVING,     HARDWARE_MOTOR_TYPE__MOTO_LDRIVING,     x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__PULLER_MOTOR_OVERTEMPERATURE,"MotorPoolerOverTemperature"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_1,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_1,  x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_1_MOTOR_OVERTEMPERATURE,"MotorDispenser1OverTemperature"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_2,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_2,  x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_2_MOTOR_OVERTEMPERATURE,"MotorDispenser2OverTemperature"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_3,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_3,  x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_3_MOTOR_OVERTEMPERATURE,"MotorDispenser3OverTemperature"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_4,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_4,  x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_4_MOTOR_OVERTEMPERATURE,"MotorDispenser4OverTemperature"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_5,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_5,  x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_5_MOTOR_OVERTEMPERATURE,"MotorDispenser5OverTemperature"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_6,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_6,  x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_6_MOTOR_OVERTEMPERATURE,"MotorDispenser6OverTemperature"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_7,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_7,  x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_7_MOTOR_OVERTEMPERATURE,"MotorDispenser7OverTemperature"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_8,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_8,  x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_8_MOTOR_OVERTEMPERATURE,"MotorDispenser8OverTemperature"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DRYER_DRIVING,HARDWARE_MOTOR_TYPE__MOTO_DRYER_DRIVING,x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DRYER_MOTOR_UNDERVOLTAGE,"MotorDryerUnderVoltage"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_RDRIVING,     HARDWARE_MOTOR_TYPE__MOTO_RDRIVING,     x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__FEEDER_MOTOR_UNDERVOLTAGE,"MotorFeederUnderVoltage"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_SCREW,        HARDWARE_MOTOR_TYPE__MOTO_SCREW,        x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__SCREW_MOTOR_UNDERVOLTAGE,"MotorScrewUnderVoltage"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_WINDER,       HARDWARE_MOTOR_TYPE__MOTO_WINDER,       x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__WINDER_MOTOR_UNDERVOLTAGE,"MotorWinderUnderVoltage"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_LDRIVING,     HARDWARE_MOTOR_TYPE__MOTO_LDRIVING,     x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__PULLER_MOTOR_UNDERVOLTAGE,"MotorPoolerUnderVoltage"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_1,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_1,  x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_1_MOTOR_UNDERVOLTAGE,"MotorDispenser1UnderVoltage"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_2,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_2,  x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_2_MOTOR_UNDERVOLTAGE,"MotorDispenser2UnderVoltage"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_3,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_3,  x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_3_MOTOR_UNDERVOLTAGE,"MotorDispenser3UnderVoltage"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_4,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_4,  x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_4_MOTOR_UNDERVOLTAGE,"MotorDispenser4UnderVoltage"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_5,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_5,  x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_5_MOTOR_UNDERVOLTAGE,"MotorDispenser5UnderVoltage"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_6,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_6,  x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_6_MOTOR_UNDERVOLTAGE,"MotorDispenser6UnderVoltage"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_7,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_7,  x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_7_MOTOR_UNDERVOLTAGE,"MotorDispenser7UnderVoltage"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_8,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_8,  x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_8_MOTOR_UNDERVOLTAGE,"MotorDispenser8UnderVoltage"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DRYER_DRIVING,HARDWARE_MOTOR_TYPE__MOTO_DRYER_DRIVING,x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DRYER_MOTOR_STALL,"MotorDryerStall"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_RDRIVING,     HARDWARE_MOTOR_TYPE__MOTO_RDRIVING,     x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__FEEDER_MOTOR_STALL,"MotorFeederStall"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_SCREW,        HARDWARE_MOTOR_TYPE__MOTO_SCREW,        x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__SCREW_MOTOR_STALL,"MotorScrewStall"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_WINDER,       HARDWARE_MOTOR_TYPE__MOTO_WINDER,       x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__WINDER_MOTOR_STALL,"MotorWinderStall"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_LDRIVING,     HARDWARE_MOTOR_TYPE__MOTO_LDRIVING,     x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__PULLER_MOTOR_STALL,"MotorPoolerStall"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_1,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_1,  x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_1_MOTOR_STALL,"MotorDispenser1Stall"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_2,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_2,  x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_2_MOTOR_STALL,"MotorDispenser2Stall"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_3,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_3,  x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_3_MOTOR_STALL,"MotorDispenser3Stall"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_4,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_4,  x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_4_MOTOR_STALL,"MotorDispenser4Stall"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_5,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_5,  x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_5_MOTOR_STALL,"MotorDispenser5Stall"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_6,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_6,  x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_6_MOTOR_STALL,"MotorDispenser6Stall"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_7,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_7,  x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_7_MOTOR_STALL,"MotorDispenser7Stall"},
- {eOneSecond,MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_8,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_8,  x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_8_MOTOR_STALL,"MotorDispenser8Stall"},
- {eHundredMillisecond,TemperatureAlarm,MIXER_PT100,   HARDWARE_PID_CONTROL_TYPE__MixerHeater        ,270,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__MIXER_OVERTEMPERATURE,"Mixer Over Temperature"},
- {eHundredMillisecond,TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP1,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ1       ,270,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_1_OVERTEMPERATURE,"DyeingHead1 Over Temperature"},
- {eHundredMillisecond,TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP2,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ2       ,270,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_2_OVERTEMPERATURE,"DyeingHead2 Over Temperature"},
- {eHundredMillisecond,TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP3,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ3       ,270,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_3_OVERTEMPERATURE,"DyeingHead3 Over Temperature"},
- {eHundredMillisecond,TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP4,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ4       ,270,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_4_OVERTEMPERATURE,"DyeingHead4 Over Temperature"},
- {eHundredMillisecond,TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP5,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ5       ,270,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_5_OVERTEMPERATURE,"DyeingHead5 Over Temperature"},
- {eHundredMillisecond,TemperatureAlarm,HEAD6_PT100, HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ6       ,270,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_6_OVERTEMPERATURE,"DyeingHead6 Over Temperature"},
- {eHundredMillisecond,TemperatureAlarm,TEMP_SENSE_ANALOG_DRYER_TEMP1,  HARDWARE_PID_CONTROL_TYPE__DryerAirTemperature,270,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DRYER_ZONE_1_OVERTEMPERATURE,"Dryer Over Temperature"},
-
- /*{eHundredMillisecond,CoversAlarm,FrontDoor1    ,1,false,true,DEBUG_LOG_CATEGORY__Error,  0xFF,5,EVENT_TYPE__FRONT_COVER_1_OPEN,"Front door #1 Open"},
- {eHundredMillisecond,CoversAlarm,FrontDoor2    ,1,false,true,DEBUG_LOG_CATEGORY__Error,  0xFF,5,EVENT_TYPE__FRONT_COVER_2_OPEN,"Front door #2 Open"},
- {eHundredMillisecond,CoversAlarm,FrontDoor3    ,1,false,true,DEBUG_LOG_CATEGORY__Error,  0xFF,5,EVENT_TYPE__FRONT_COVER_3_OPEN,"Front door #3 Open"},
- {eHundredMillisecond,CoversAlarm,FrontDoor4    ,1,false,true,DEBUG_LOG_CATEGORY__Error,  0xFF,5,EVENT_TYPE__FRONT_COVER_4_OPEN,"Front door #4 Open"},
- {eHundredMillisecond,CoversAlarm,RearDoor      ,1,false,true,DEBUG_LOG_CATEGORY__Error,  0xFF,5,EVENT_TYPE__REAR_COVER_OPEN,"Rear door Open"},
- {eHundredMillisecond,CoversAlarm,CartridgesDoor,1,false,true,DEBUG_LOG_CATEGORY__Warning,0xFF,5,EVENT_TYPE__CARTRIDGES_COVER_OPEN,"Cartridges door Open"},*/
-
- {eOneSecond,TemperatureAlarm,MIXER_PT100,   HARDWARE_PID_CONTROL_TYPE__MixerHeater        ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__MIXER_UNDERTEMPERATURE_A,"Mixer PT100 Not Heating"},
- {eOneSecond,TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP1,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ1       ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_1_UNDERTEMPERATURE_A,"DyeingHead 1 PT100 Not Heating"},
- {eOneSecond,TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP2,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ2       ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_2_UNDERTEMPERATURE_A,"DyeingHead 2 PT100 Not Heating"},
- {eOneSecond,TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP3,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ3       ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_3_UNDERTEMPERATURE_A,"DyeingHead 3 PT100 Not Heating"},
- {eOneSecond,TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP4,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ4       ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_4_UNDERTEMPERATURE_A,"DyeingHead 4 PT100 Not Heating"},
- {eOneSecond,TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP5,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ5       ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_5_UNDERTEMPERATURE_A,"DyeingHead 5 PT100 Not Heating"},
- {eOneSecond,TemperatureAlarm,HEAD6_PT100, HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ6       ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_6_UNDERTEMPERATURE_A,"DyeingHead 6 PT100 Not Heating"},
- {eOneSecond,TemperatureAlarm,TEMP_SENSE_ANALOG_DRYER_TEMP1,  HARDWARE_PID_CONTROL_TYPE__DryerAirTemperature,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DRYER_ZONE_1_UNDERTEMPERATURE_A,"Dryer PT100 Not Heating"},
- {eOneSecond,TemperatureAlarm,MIXER_PT100,   HARDWARE_PID_CONTROL_TYPE__MixerHeater        ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__MIXER_UNDERTEMPERATURE_B,"Mixer PT100 Heating Failure"},
- {eOneSecond,TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP1,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ1       ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_1_UNDERTEMPERATURE_B,"DyeingHead 1 PT100 Heating Failure"},
- {eOneSecond,TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP2,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ2       ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_2_UNDERTEMPERATURE_B,"DyeingHead 2 PT100 Heating Failure"},
- {eOneSecond,TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP3,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ3       ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_3_UNDERTEMPERATURE_B,"DyeingHead 3 PT100 Heating Failure"},
- {eOneSecond,TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP4,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ4       ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_4_UNDERTEMPERATURE_B,"DyeingHead 4 PT100 Heating Failure"},
- {eOneSecond,TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP5,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ5       ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_5_UNDERTEMPERATURE_B,"DyeingHead 5 PT100 Heating Failure"},
- {eOneSecond,TemperatureAlarm,HEAD6_PT100, HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ6       ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_6_UNDERTEMPERATURE_B,"DyeingHead 6 PT100 Heating Failure"},
- {eOneSecond,TemperatureAlarm,TEMP_SENSE_ANALOG_DRYER_TEMP1,  HARDWARE_PID_CONTROL_TYPE__DryerAirTemperature,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DRYER_ZONE_1_UNDERTEMPERATURE_B,"Dryer PT100 Heating Failure"},
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_RLOADING        , HARDWARE_MOTOR_TYPE__MOTO_RLOADING        , x_STATUS_OCD          , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__RIGHT_LOADER_MOTOR_OVERCURRENT                         ," MotorRightLoaderOverCurrent "                },                                           /* 3004 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_LLOADING        , HARDWARE_MOTOR_TYPE__MOTO_LLOADING        , x_STATUS_OCD          , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__LEFT_LOADER_MOTOR_OVERCURRENT                          ," MotorLeftLoaderOverCurrent  "                },                                           /* 3006 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM   , HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM   , x_STATUS_OCD          , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__LOADING_ARM_MOTOR_OVERCURRENT                          ," MotorLoadindARMOverCurrent  "                },                                           /* 3009 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_LDANCER2        , HARDWARE_MOTOR_TYPE__MOTO_LDANCER2        , x_STATUS_OCD          , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__WINDER_MOTOR_OVERCURRENT /*EVENT_TYPE__WINDER_DANCER_MOTOR_OVERCURRENT*/                       ," MotorWinderDancerOverCurrent    "            },   /* 3036 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_LDANCER1   , HARDWARE_MOTOR_TYPE__MOTO_LDANCER1   , x_STATUS_OCD          , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__PULLER_MOTOR_OVERCURRENT /*EVENT_TYPE__PULLER_DANCER_MOTOR_OVERCURRENT*/                       ," MotorPullerDancerOverCurrent    "            },   /* 3037 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_RDANCER   , HARDWARE_MOTOR_TYPE__MOTO_RDANCER   , x_STATUS_OCD          , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__FEEDER_MOTOR_OVERCURRENT /*EVENT_TYPE__FEEDER_DANCER_MOTOR_OVERCURRENT*/                       ," MotorFeederDancerOverCurrent    "            },   /* 3038 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID       , HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID       , x_STATUS_OCD          , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DRYER_MOTOR_OVERCURRENT  /*EVENT_TYPE__DRYER_LID_MOTOR_OVERCURRENT*/                           ," MotorDryerLidOverCurrent    "                },   /* 4017 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DH_LID          , HARDWARE_MOTOR_TYPE__MOTO_DH_LID          , x_STATUS_OCD          , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_COVER_MOTOR_OVERCURRENT                    ," MotorDyeingHeadCoverOverCurrent "            },                                       /* 5031 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANMECH    , HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANMECH    , x_STATUS_OCD          , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_CLEANING_MECHANISM_MOTOR_OVERCURRENT       ," MotorDyeingHeadCleaningMechanismOverCurrent "},                                       /* 5035 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANHEAD    , HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANHEAD    , x_STATUS_OCD          , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_CLEANING_HEAD_MOTOR_OVERCURRENT            ," MotorDyeingHeadCleaningHeadOverCurrent  "    },                                       /* 5039 */
-
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_RLOADING        , HARDWARE_MOTOR_TYPE__MOTO_RLOADING        , x_STATUS_TH_SD        , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__RIGHT_LOADER_MOTOR_OVERTEMPERATURE                     ," MotorRightLoaderOverTemperature "            },                                           /* 3011 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_LLOADING        , HARDWARE_MOTOR_TYPE__MOTO_LLOADING        , x_STATUS_TH_SD        , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__LEFT_LOADER_MOTOR_OVERTEMPERATURE                      ," MotorLeftLoaderOverTemperature  "            },                                           /* 3013 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM   , HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM   , x_STATUS_TH_SD        , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__LOADING_ARM_MOTOR_OVERTEMPERATURE                      ," MotorLoadArmOverTemperature "                },                                           /* 3016 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_LDANCER2        , HARDWARE_MOTOR_TYPE__MOTO_LDANCER2        , x_STATUS_TH_SD        , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__WINDER_DANCER_MOTOR_OVERTEMPERATURE                    ," MotorWinderDancerOverTemperature    "        },                                           /* 3039 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_LDANCER1   , HARDWARE_MOTOR_TYPE__MOTO_LDANCER1   , x_STATUS_TH_SD        , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__PULLER_DANCER_MOTOR_OVERTEMPERATURE                    ," MotorPullerDancerOverTemperature    "        },                                           /* 3040 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_RDANCER   , HARDWARE_MOTOR_TYPE__MOTO_RDANCER   , x_STATUS_TH_SD        , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__FEEDER_DANCER_MOTOR_OVERTEMPERATURE                    ," MotorFeederDancerOverTemperature    "        },                                           /* 3041 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID       , HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID       , x_STATUS_TH_SD        , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DRYER_LID_MOTOR_OVERTEMPERATURE                        ," MotorDryerLidOverTemperature    "            },                                           /* 4018 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DH_LID          , HARDWARE_MOTOR_TYPE__MOTO_DH_LID          , x_STATUS_TH_SD        , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_COVER_MOTOR_OVERTEMPERATURE                ," MotorDyeingHeadCoverOverTemperature "        },                                           /* 5032 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANMECH    , HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANMECH    , x_STATUS_TH_SD        , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_CLEANING_MECHANISM_MOTOR_OVERTEMPERATURE   ," MotorDyeingHeadCleaningOverTemperature  "    },                                           /* 5036 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANHEAD    , HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANHEAD    , x_STATUS_TH_SD        , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_CLEANING_HEAD_MOTOR_OVERTEMPERATURE        ," MotorDyeingHeadCleaningHeadOverTemperature  "},                                           /* 5040 */
-
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_RLOADING        , HARDWARE_MOTOR_TYPE__MOTO_RLOADING         ,x_STATUS_STEP_LOSS_A   , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__LOADING_ARM_MOTOR_STALL                                ," MotorLoadingARMStall     "                   },                                           /* 3018 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_LLOADING        , HARDWARE_MOTOR_TYPE__MOTO_LLOADING         ,x_STATUS_STEP_LOSS_A   , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__WINDER_DANCER_MOTOR_STALL                              ," MotorWinderDancesStall  "                    },                                           /* 3020 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM   , HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM    ,x_STATUS_STEP_LOSS_A   , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__LOADING_ARM_MOTOR_STALL                                ," MotorLoadingARMStall     "                   },                                           /* 3023 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_LDANCER2        , HARDWARE_MOTOR_TYPE__MOTO_LDANCER2         ,x_STATUS_STEP_LOSS_A   , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__WINDER_DANCER_MOTOR_STALL                              ," MotorWinderDancesStall  "                    },                                           /* 3042 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_LDANCER1   , HARDWARE_MOTOR_TYPE__MOTO_LDANCER1    ,x_STATUS_STEP_LOSS_A   , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__PULLER_DANCER_MOTOR_STALL                              ," MotorPullerDancerStall  "                    },                                           /* 3043 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_RDANCER   , HARDWARE_MOTOR_TYPE__MOTO_RDANCER    ,x_STATUS_STEP_LOSS_A   , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__FEEDER_DANCER_MOTOR_STALL                              ," MotorFeederDancerStall  "                    },                                           /* 3044 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID       , HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID        ,x_STATUS_STEP_LOSS_A   , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DRYER_LID_MOTOR_STALL                                  ," MotorDryerLidStall  "                        },                                           /* 4019 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DH_LID          , HARDWARE_MOTOR_TYPE__MOTO_DH_LID           ,x_STATUS_STEP_LOSS_A   , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_COVER_MOTOR_STALL                          ," MotorDyeingHeadCoverStall   "                },                                           /* 5033 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANMECH    , HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANMECH     ,x_STATUS_STEP_LOSS_A   , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_CLEANING_MECHANISM_MOTOR_STALL             ," MotorDyeingHeadCleaningMechanismStall   "    },                                           /* 5037 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANHEAD    , HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANHEAD     ,x_STATUS_STEP_LOSS_A   , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_CLEANING_HEAD_MOTOR_STALL                  ," MotorDryeingHeadCleaningStall   "            },                                           /* 5041 */
-
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_RLOADING        , HARDWARE_MOTOR_TYPE__MOTO_RLOADING        , x_STATUS_UVLO         , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__RIGHT_LOADER_MOTOR_UNDERVOLTAGE                        ," MotorRightLoaderUnderVoltage "               },                                           /* 3025 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_LLOADING        , HARDWARE_MOTOR_TYPE__MOTO_LLOADING        , x_STATUS_UVLO         , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__LEFT_LOADER_MOTOR_UNDERVOLTAGE                         ," MotorLeftLoaderUnderVoltage "                },                                           /* 3027 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM   , HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM   , x_STATUS_UVLO         , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__LOADING_ARM_MOTOR_UNDERVOLTAGE                         ," MotorLoaderARMUnderVoltage  "                },                                           /* 3030 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_LDANCER2        , HARDWARE_MOTOR_TYPE__MOTO_LDANCER2        , x_STATUS_UVLO         , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__WINDER_DANCER_MOTOR_UNDERVOLTAGE                       ," MotorWinderDancerUnderVoltage   "            },                                           /* 3045 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_LDANCER1   , HARDWARE_MOTOR_TYPE__MOTO_LDANCER1   , x_STATUS_UVLO         , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__PULLER_DANCER_MOTOR_UNDERVOLTAGE                       ," MotorPullerDancerUnderVoltage   "            },                                           /* 3046 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_RDANCER   , HARDWARE_MOTOR_TYPE__MOTO_RDANCER   , x_STATUS_UVLO         , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__FEEDER_DANCER_MOTOR_UNDERVOLTAGE                       ," MotorFeederDancerUnderVoltage   "            },                                           /* 3047 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID       , HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID       , x_STATUS_UVLO         , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DRYER_LID_MOTOR_UNDERVOLTAGE                           ," MotorDryerLidUnderVoltage   "                },                                           /* 4020 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DH_LID          , HARDWARE_MOTOR_TYPE__MOTO_DH_LID          , x_STATUS_UVLO         , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_COVER_MOTOR_UNDERVOLTAGE                   ," MotorDyeingHeadCoverUnderVoltage    "        },                                           /* 5034 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANMECH    , HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANMECH    , x_STATUS_UVLO         , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_CLEANING_MECHANISM_MOTOR_UNDERVOLTAGE                ," MotorDyeingHeadCleaningUnderVoltage "        },                                           /* 5038 */
- { eOneSecond, MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANHEAD    , HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANHEAD    , x_STATUS_UVLO         , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_CLEANING_HEAD_MOTOR_UNDERVOLTAGE           ," MotorDyeingHeadCleaningHeadUnderVoltage "    },                                           /* 5042 */
-
-// { eOneSecond, CurrentAlarm, HEAD_ZONE_1  , HEAD_ZONE_1  , 125         , TRUE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_ZONE_1_CURRENT_OUT_OF_RANGE           ," Head Zone 1 Heater Current Out Of Range "    },                                           /* 5018 */
-// { eOneSecond, CurrentAlarm, HEAD_ZONE_2    , HEAD_ZONE_2    , 187         , TRUE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_ZONE_2_CURRENT_OUT_OF_RANGE           ," Head Zone 2 Heater Current Out Of Range "    },                                           /* 5019 */
-// { eOneSecond, CurrentAlarm, HEAD_ZONE_3    , HEAD_ZONE_3    , 187         , TRUE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_ZONE_3_CURRENT_OUT_OF_RANGE           ," Head Zone 3 Heater Current Out Of Range "    },                                           /* 5020 */
-// { eOneSecond, CurrentAlarm, HEAD_ZONE_4    , HEAD_ZONE_4    , 312         , TRUE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_ZONE_4_CURRENT_OUT_OF_RANGE           ," Head Zone 4 Heater Current Out Of Range "    },                                           /* 5021 */
-// { eOneSecond, CurrentAlarm, HEAD_ZONE_5_6    , HEAD_ZONE_5_6    , 500         , TRUE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_ZONE_5_6_CURRENT_OUT_OF_RANGE         ," Head Zone 5-6 Heater Current Out Of Range "    },                                           /* 5022 */
-// { eOneSecond, CurrentAlarm, MIXCHIP        , MIXCHIP        , 187         , TRUE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__MIXER_CURRENT_OUT_OF_RANGE                        ," Mixer Heater Current Out Of Range "    },                                           /* 6004 */
-// { eOneSecond, CurrentAlarm, DRYER_CURRENT_1, DRYER_CURRENT_1, 800         , TRUE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DRYER_HEATERS_ZONE_1_CURRENT_OUT_OF_RANGE         ," Drier Heater 1 Current Out Of Range "    },                                           /* 6004 */
-// { eOneSecond, CurrentAlarm, DRYER_CURRENT_2, DRYER_CURRENT_2, 400         , TRUE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DRYER_HEATERS_ZONE_2_CURRENT_OUT_OF_RANGE         ," Drier Heater 2 Current Out Of Range "    },                                           /* 6004 */
-
- // { eOneSecond, CurrentAlarm, HEAD_ZONE_1  , HEAD_ZONE_1  , 0         , FALSE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_ZONE_1_CURRENT_LOOP_BREAK           ," Head Zone 1 Heater Current Loop Break "    },                                           /* 5018 */
- // { eOneSecond, CurrentAlarm, HEAD_ZONE_2    , HEAD_ZONE_2    , 0         , FALSE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_ZONE_2_CURRENT_LOOP_BREAK           ," Head Zone 2 Heater Current Loop Break "    },                                           /* 5019 */
- // { eOneSecond, CurrentAlarm, HEAD_ZONE_3    , HEAD_ZONE_3    , 0         , FALSE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_ZONE_3_CURRENT_LOOP_BREAK           ," Head Zone 3 Heater Current Loop Break "    },                                           /* 5020 */
- // { eOneSecond, CurrentAlarm, HEAD_ZONE_4    , HEAD_ZONE_4    , 0         , FALSE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_ZONE_4_CURRENT_LOOP_BREAK           ," Head Zone 4 Heater Current Loop Break "    },                                           /* 5021 */
- // { eOneSecond, CurrentAlarm, HEAD_ZONE_5_6    , HEAD_ZONE_5_6    , 0         , FALSE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_ZONE_5_6_CURRENT_LOOP_BREAK         ," Head Zone 5-6 Heater Current Loop Break "    },                                           /* 5022 */
- // { eOneSecond, CurrentAlarm, MIXCHIP        , MIXCHIP        , 0         , FALSE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__MIXER_CURRENT_LOOP_BREAK                        ," Mixer Heater Current Loop Break "    },                                           /* 6004 */
- // { eOneSecond, CurrentAlarm, DRYER_CURRENT_1, DRYER_CURRENT_1, 0         , FALSE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DRYER_HEATERS_ZONE_1_CURRENT_LOOP_BREAK         ," Drier Heater 1 Current Loop Break "    },                                           /* 6004 */
- // { eOneSecond, CurrentAlarm, DRYER_CURRENT_2, DRYER_CURRENT_2, 0         , FALSE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DRYER_HEATERS_ZONE_2_CURRENT_LOOP_BREAK         ," Drier Heater 2 Current Loop Break "    },                                           /* 6004 */
-// {eOneSecond,DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Critical,0xFF,0,EVENT_TYPE__DYEING_HEAD_THERMAL_CUTOFF,"Dyeing head Thermal Cut-Off"},
-
- {eOneSecond,DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Warning,0xFF,0,EVENT_TYPE__THREAD_BREAK,"Thread Break"},
- {eOneSecond,DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Warning,0xFF,0,EVENT_TYPE__THREAD_TENSION_CONTROL_FAILURE_FEEDER_DANCER,"Thread Feeder Tension Control Failure"},
- {eOneSecond,DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Warning,0xFF,0,EVENT_TYPE__THREAD_TENSION_CONTROL_FAILURE_PULLER_DANCER,"Thread Puller Tension Control Failure"},
- {eOneSecond,DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Warning,0xFF,0,EVENT_TYPE__THREAD_TENSION_CONTROL_FAILURE_WINDER_DANCER,"Thread Winder Tension Control Failure"},
- {eOneSecond,DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Warning,0xFF,0,EVENT_TYPE__WINDER_CONE_DOES_NOT_EXIST,"No cone in winder"},
-
- {eOneSecond,DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Critical,0xFF,0,EVENT_TYPE__DISPENSER_1_OVERPRESSURE,"Dispenser 1 OverPressure"},
- {eOneSecond,DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Critical,0xFF,0,EVENT_TYPE__DISPENSER_2_OVERPRESSURE,"Dispenser 2 OverPressure"},
- {eOneSecond,DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Critical,0xFF,0,EVENT_TYPE__DISPENSER_3_OVERPRESSURE,"Dispenser 3 OverPressure"},
- {eOneSecond,DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Critical,0xFF,0,EVENT_TYPE__DISPENSER_4_OVERPRESSURE,"Dispenser 4 OverPressure"},
- {eOneSecond,DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Critical,0xFF,0,EVENT_TYPE__DISPENSER_5_OVERPRESSURE,"Dispenser 5 OverPressure"},
- {eOneSecond,DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Critical,0xFF,0,EVENT_TYPE__DISPENSER_6_OVERPRESSURE,"Dispenser 6 OverPressure"},
- {eOneSecond,DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Critical,0xFF,0,EVENT_TYPE__DISPENSER_7_OVERPRESSURE,"Dispenser 7 OverPressure"},
- {eOneSecond,DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Critical,0xFF,0,EVENT_TYPE__DISPENSER_8_OVERPRESSURE,"Dispenser 8 OverPressure"},
-
- {eOneSecond,DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Critical,0xFF,0,EVENT_TYPE__DRYER_DOOR_OPEN,"Dryer Door is open"},
- {eOneSecond,DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Critical,0xFF,0,EVENT_TYPE__NO_AIR_PRESSURE,"No suction in the waste handling system"},
- {eOneSecond,DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Critical,0xFF,0,EVENT_TYPE__AIR_FILTER_NOT_INSTALLED,"Air filter missing"},
- {eOneSecond,DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__WASTE_CONTAINER_EMPTYING_TIMEOUT,"Waste Container Emptying Timeout"},
+ {eHundredMillisecond,ALARM_SOURCE_TYPE__LimitSwitchAlarm,LimitSwitchAlarmEmpty_1,0,false,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DISPENSER_1_EMPTY,"Dispenser 1 Empty"},
+ {eHundredMillisecond,ALARM_SOURCE_TYPE__LimitSwitchAlarm,LimitSwitchAlarmEmpty_2,1,false,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DISPENSER_2_EMPTY,"Dispenser 2 Empty"},
+ {eHundredMillisecond,ALARM_SOURCE_TYPE__LimitSwitchAlarm,LimitSwitchAlarmEmpty_3,2,false,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DISPENSER_3_EMPTY,"Dispenser 3 Empty"},
+ {eHundredMillisecond,ALARM_SOURCE_TYPE__LimitSwitchAlarm,LimitSwitchAlarmEmpty_4,3,false,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DISPENSER_4_EMPTY,"Dispenser 4 Empty"},
+ {eHundredMillisecond,ALARM_SOURCE_TYPE__LimitSwitchAlarm,LimitSwitchAlarmEmpty_5,4,false,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DISPENSER_5_EMPTY,"Dispenser 5 Empty"},
+ {eHundredMillisecond,ALARM_SOURCE_TYPE__LimitSwitchAlarm,LimitSwitchAlarmEmpty_6,5,false,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DISPENSER_6_EMPTY,"Dispenser 6 Empty"},
+ {eHundredMillisecond,ALARM_SOURCE_TYPE__LimitSwitchAlarm,LimitSwitchAlarmEmpty_7,6,false,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DISPENSER_7_EMPTY,"Dispenser 7 Empty"},
+ {eHundredMillisecond,ALARM_SOURCE_TYPE__LimitSwitchAlarm,LimitSwitchAlarmEmpty_8,7,false,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DISPENSER_8_EMPTY,"Dispenser 8 Empty"},
+
+ {eOneSecond,ALARM_SOURCE_TYPE__HardLimitAlarm,0,0,true,true,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_1_UPPER_HARD_LIMIT,"Dispenser 1 is at the upper limit"},
+ {eOneSecond,ALARM_SOURCE_TYPE__HardLimitAlarm,1,1,true,true,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_2_UPPER_HARD_LIMIT,"Dispenser 2 is at the upper limit"},
+ {eOneSecond,ALARM_SOURCE_TYPE__HardLimitAlarm,2,2,true,true,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_3_UPPER_HARD_LIMIT,"Dispenser 3 is at the upper limit"},
+ {eOneSecond,ALARM_SOURCE_TYPE__HardLimitAlarm,3,3,true,true,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_4_UPPER_HARD_LIMIT,"Dispenser 4 is at the upper limit"},
+ {eOneSecond,ALARM_SOURCE_TYPE__HardLimitAlarm,4,4,true,true,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_5_UPPER_HARD_LIMIT,"Dispenser 5 is at the upper limit"},
+ {eOneSecond,ALARM_SOURCE_TYPE__HardLimitAlarm,5,5,true,true,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_6_UPPER_HARD_LIMIT,"Dispenser 6 is at the upper limit"},
+ {eOneSecond,ALARM_SOURCE_TYPE__HardLimitAlarm,6,6,true,true,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_7_UPPER_HARD_LIMIT,"Dispenser 7 is at the upper limit"},
+ {eOneSecond,ALARM_SOURCE_TYPE__HardLimitAlarm,7,7,true,true,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_8_UPPER_HARD_LIMIT,"Dispenser 8 is at the upper limit"},
+ {eOneSecond,ALARM_SOURCE_TYPE__HardLimitAlarm,0,0,true,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_1_LOWER_HARD_LIMIT,"Dispenser 1 is at the lower limit"},
+ {eOneSecond,ALARM_SOURCE_TYPE__HardLimitAlarm,1,1,true,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_2_LOWER_HARD_LIMIT,"Dispenser 2 is at the lower limit"},
+ {eOneSecond,ALARM_SOURCE_TYPE__HardLimitAlarm,2,2,true,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_3_LOWER_HARD_LIMIT,"Dispenser 3 is at the lower limit"},
+ {eOneSecond,ALARM_SOURCE_TYPE__HardLimitAlarm,3,3,true,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_4_LOWER_HARD_LIMIT,"Dispenser 4 is at the lower limit"},
+ {eOneSecond,ALARM_SOURCE_TYPE__HardLimitAlarm,4,4,true,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_5_LOWER_HARD_LIMIT,"Dispenser 5 is at the lower limit"},
+ {eOneSecond,ALARM_SOURCE_TYPE__HardLimitAlarm,5,5,true,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_6_LOWER_HARD_LIMIT,"Dispenser 6 is at the lower limit"},
+ {eOneSecond,ALARM_SOURCE_TYPE__HardLimitAlarm,6,6,true,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_7_LOWER_HARD_LIMIT,"Dispenser 7 is at the lower limit"},
+ {eOneSecond,ALARM_SOURCE_TYPE__HardLimitAlarm,7,7,true,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_8_LOWER_HARD_LIMIT,"Dispenser 8 is at the lower limit"},
+
+ {eOneSecond,ALARM_SOURCE_TYPE__PressureAlarm,0,0,5,true,DEBUG_LOG_CATEGORY__Error,0xFF,5,EVENT_TYPE__DISPENSER_1_HIGH_PRESSURE,"Dispenser 1 High Pressure"},
+ {eOneSecond,ALARM_SOURCE_TYPE__PressureAlarm,1,1,5,true,DEBUG_LOG_CATEGORY__Error,0xFF,5,EVENT_TYPE__DISPENSER_2_HIGH_PRESSURE,"Dispenser 2 High Pressure"},
+ {eOneSecond,ALARM_SOURCE_TYPE__PressureAlarm,2,2,5,true,DEBUG_LOG_CATEGORY__Error,0xFF,5,EVENT_TYPE__DISPENSER_3_HIGH_PRESSURE,"Dispenser 3 High Pressure"},
+ {eOneSecond,ALARM_SOURCE_TYPE__PressureAlarm,3,3,5,true,DEBUG_LOG_CATEGORY__Error,0xFF,5,EVENT_TYPE__DISPENSER_4_HIGH_PRESSURE,"Dispenser 4 High Pressure"},
+ {eOneSecond,ALARM_SOURCE_TYPE__PressureAlarm,4,4,5,true,DEBUG_LOG_CATEGORY__Error,0xFF,5,EVENT_TYPE__DISPENSER_5_HIGH_PRESSURE,"Dispenser 5 High Pressure"},
+ {eOneSecond,ALARM_SOURCE_TYPE__PressureAlarm,5,5,5,true,DEBUG_LOG_CATEGORY__Error,0xFF,5,EVENT_TYPE__DISPENSER_6_HIGH_PRESSURE,"Dispenser 6 High Pressure"},
+ {eOneSecond,ALARM_SOURCE_TYPE__PressureAlarm,6,6,5,true,DEBUG_LOG_CATEGORY__Error,0xFF,5,EVENT_TYPE__DISPENSER_7_HIGH_PRESSURE,"Dispenser 7 High Pressure"},
+ {eOneSecond,ALARM_SOURCE_TYPE__PressureAlarm,7,7,5,true,DEBUG_LOG_CATEGORY__Error,0xFF,5,EVENT_TYPE__DISPENSER_8_HIGH_PRESSURE,"Dispenser 8 High Pressure"},
+
+ {eOneSecond,ALARM_SOURCE_TYPE__DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Critical,0xFF,0,EVENT_TYPE__DISPENSER_1_OVERPRESSURE,"Dispenser 1 Over Pressure"},
+ {eOneSecond,ALARM_SOURCE_TYPE__DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Critical,0xFF,0,EVENT_TYPE__DISPENSER_2_OVERPRESSURE,"Dispenser 2 Over Pressure"},
+ {eOneSecond,ALARM_SOURCE_TYPE__DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Critical,0xFF,0,EVENT_TYPE__DISPENSER_3_OVERPRESSURE,"Dispenser 3 Over Pressure"},
+ {eOneSecond,ALARM_SOURCE_TYPE__DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Critical,0xFF,0,EVENT_TYPE__DISPENSER_4_OVERPRESSURE,"Dispenser 4 Over Pressure"},
+ {eOneSecond,ALARM_SOURCE_TYPE__DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Critical,0xFF,0,EVENT_TYPE__DISPENSER_5_OVERPRESSURE,"Dispenser 5 Over Pressure"},
+ {eOneSecond,ALARM_SOURCE_TYPE__DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Critical,0xFF,0,EVENT_TYPE__DISPENSER_6_OVERPRESSURE,"Dispenser 6 Over Pressure"},
+ {eOneSecond,ALARM_SOURCE_TYPE__DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Critical,0xFF,0,EVENT_TYPE__DISPENSER_7_OVERPRESSURE,"Dispenser 7 Over Pressure"},
+ {eOneSecond,ALARM_SOURCE_TYPE__DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Critical,0xFF,0,EVENT_TYPE__DISPENSER_8_OVERPRESSURE,"Dispenser 8 Over Pressure"},
+
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DRYER_DRIVING,HARDWARE_MOTOR_TYPE__MOTO_DRYER_DRIVING,x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DRYER_MOTOR_OVERCURRENT,"Motor Drier Over Current"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_RDRIVING,     HARDWARE_MOTOR_TYPE__MOTO_RDRIVING,     x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__FEEDER_MOTOR_OVERCURRENT,"Motor Feeder Over Current"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_SCREW,        HARDWARE_MOTOR_TYPE__MOTO_SCREW,        x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__SCREW_MOTOR_OVERCURRENT,"Motor Screw Over Current"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_WINDER,       HARDWARE_MOTOR_TYPE__MOTO_WINDER,       x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__WINDER_MOTOR_OVERCURRENT,"Motor Winder Over Current"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_LDRIVING,     HARDWARE_MOTOR_TYPE__MOTO_LDRIVING,     x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__PULLER_MOTOR_OVERCURRENT,"Motor Puller Over Current"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_1,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_1,  x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_1_MOTOR_OVERCURRENT,"Motor Dispenser1 Over Current"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_2,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_2,  x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_2_MOTOR_OVERCURRENT,"Motor Dispenser2 Over Current"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_3,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_3,  x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_3_MOTOR_OVERCURRENT,"Motor Dispenser3 Over Current"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_4,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_4,  x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_4_MOTOR_OVERCURRENT,"Motor Dispenser4 Over Current"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_5,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_5,  x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_5_MOTOR_OVERCURRENT,"Motor Dispenser5 Over Current"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_6,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_6,  x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_6_MOTOR_OVERCURRENT,"Motor Dispenser6 Over Current"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_7,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_7,  x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_7_MOTOR_OVERCURRENT,"Motor Dispenser7 Over Current"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_8,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_8,  x_STATUS_OCD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_8_MOTOR_OVERCURRENT,"Motor Dispenser8 Over Current"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DRYER_DRIVING,HARDWARE_MOTOR_TYPE__MOTO_DRYER_DRIVING,x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DRYER_MOTOR_OVERTEMPERATURE,"Motor Drier Over Temperature"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_RDRIVING,     HARDWARE_MOTOR_TYPE__MOTO_RDRIVING,     x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__FEEDER_MOTOR_OVERTEMPERATURE,"Motor Feeder Over Temperature"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_SCREW,        HARDWARE_MOTOR_TYPE__MOTO_SCREW,        x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__SCREW_MOTOR_OVERTEMPERATURE,"Motor Screw Over Temperature"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_WINDER,       HARDWARE_MOTOR_TYPE__MOTO_WINDER,       x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__WINDER_MOTOR_OVERTEMPERATURE,"Motor Winder Over Temperature"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_LDRIVING,     HARDWARE_MOTOR_TYPE__MOTO_LDRIVING,     x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__PULLER_MOTOR_OVERTEMPERATURE,"Motor Puller Over Temperature"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_1,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_1,  x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_1_MOTOR_OVERTEMPERATURE,"Motor Dispenser1 Over Temperature"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_2,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_2,  x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_2_MOTOR_OVERTEMPERATURE,"Motor Dispenser2 Over Temperature"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_3,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_3,  x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_3_MOTOR_OVERTEMPERATURE,"Motor Dispenser3 Over Temperature"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_4,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_4,  x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_4_MOTOR_OVERTEMPERATURE,"Motor Dispenser4 Over Temperature"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_5,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_5,  x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_5_MOTOR_OVERTEMPERATURE,"Motor Dispenser5 Over Temperature"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_6,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_6,  x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_6_MOTOR_OVERTEMPERATURE,"Motor Dispenser6 Over Temperature"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_7,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_7,  x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_7_MOTOR_OVERTEMPERATURE,"Motor Dispenser7 Over Temperature"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_8,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_8,  x_STATUS_TH_SD,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_8_MOTOR_OVERTEMPERATURE,"Motor Dispenser8 Over Temperature"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DRYER_DRIVING,HARDWARE_MOTOR_TYPE__MOTO_DRYER_DRIVING,x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DRYER_MOTOR_UNDERVOLTAGE,"Motor Drier Under Voltage"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_RDRIVING,     HARDWARE_MOTOR_TYPE__MOTO_RDRIVING,     x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__FEEDER_MOTOR_UNDERVOLTAGE,"Motor Feeder Under Voltage"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_SCREW,        HARDWARE_MOTOR_TYPE__MOTO_SCREW,        x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__SCREW_MOTOR_UNDERVOLTAGE,"Motor Screw Under Voltage"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_WINDER,       HARDWARE_MOTOR_TYPE__MOTO_WINDER,       x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__WINDER_MOTOR_UNDERVOLTAGE,"Motor Winder Under Voltage"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_LDRIVING,     HARDWARE_MOTOR_TYPE__MOTO_LDRIVING,     x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__PULLER_MOTOR_UNDERVOLTAGE,"Motor Puller Under Voltage"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_1,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_1,  x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_1_MOTOR_UNDERVOLTAGE,"Motor Dispenser1 Under Voltage"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_2,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_2,  x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_2_MOTOR_UNDERVOLTAGE,"Motor Dispenser2 Under Voltage"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_3,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_3,  x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_3_MOTOR_UNDERVOLTAGE,"Motor Dispenser3 Under Voltage"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_4,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_4,  x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_4_MOTOR_UNDERVOLTAGE,"Motor Dispenser4 Under Voltage"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_5,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_5,  x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_5_MOTOR_UNDERVOLTAGE,"Motor Dispenser5 Under Voltage"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_6,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_6,  x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_6_MOTOR_UNDERVOLTAGE,"Motor Dispenser6 Under Voltage"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_7,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_7,  x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_7_MOTOR_UNDERVOLTAGE,"Motor Dispenser7 Under Voltage"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_8,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_8,  x_STATUS_UVLO,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_8_MOTOR_UNDERVOLTAGE,"Motor Dispenser8 Under Voltage"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DRYER_DRIVING,HARDWARE_MOTOR_TYPE__MOTO_DRYER_DRIVING,x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DRYER_MOTOR_STALL,"Motor Drier Stall"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_RDRIVING,     HARDWARE_MOTOR_TYPE__MOTO_RDRIVING,     x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__FEEDER_MOTOR_STALL,"Motor Feeder Stall"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_SCREW,        HARDWARE_MOTOR_TYPE__MOTO_SCREW,        x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__SCREW_MOTOR_STALL,"Motor Screw Stall"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_WINDER,       HARDWARE_MOTOR_TYPE__MOTO_WINDER,       x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__WINDER_MOTOR_STALL,"Motor Winder Stall"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_LDRIVING,     HARDWARE_MOTOR_TYPE__MOTO_LDRIVING,     x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__PULLER_MOTOR_STALL,"Motor Puller Stall"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_1,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_1,  x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_1_MOTOR_STALL,"Motor Dispenser1 Stall"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_2,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_2,  x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_2_MOTOR_STALL,"Motor Dispenser2 Stall"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_3,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_3,  x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_3_MOTOR_STALL,"Motor Dispenser3 Stall"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_4,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_4,  x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_4_MOTOR_STALL,"Motor Dispenser4 Stall"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_5,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_5,  x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_5_MOTOR_STALL,"Motor Dispenser5 Stall"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_6,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_6,  x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_6_MOTOR_STALL,"Motor Dispenser6 Stall"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_7,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_7,  x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_7_MOTOR_STALL,"Motor Dispenser7 Stall"},
+ {eOneSecond,ALARM_SOURCE_TYPE__MotorAlarm,HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_8,  HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_8,  x_STATUS_STEP_LOSS_A,false,DEBUG_LOG_CATEGORY__Error,0xFF,2,EVENT_TYPE__DISPENSER_8_MOTOR_STALL,"Motor Dispenser8 Stall"},
+ {eHundredMillisecond,ALARM_SOURCE_TYPE__TemperatureAlarm,MIXER_PT100,   HARDWARE_PID_CONTROL_TYPE__MixerHeater        ,270,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__MIXER_OVERTEMPERATURE,"Mixer Over Temperature"},
+ {eHundredMillisecond,ALARM_SOURCE_TYPE__TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP1,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ1       ,270,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_1_OVERTEMPERATURE,"DyeingHead1 Over Temperature"},
+ {eHundredMillisecond,ALARM_SOURCE_TYPE__TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP2,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ2       ,270,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_2_OVERTEMPERATURE,"DyeingHead2 Over Temperature"},
+ {eHundredMillisecond,ALARM_SOURCE_TYPE__TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP3,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ3       ,270,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_3_OVERTEMPERATURE,"DyeingHead3 Over Temperature"},
+ {eHundredMillisecond,ALARM_SOURCE_TYPE__TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP4,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ4       ,270,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_4_OVERTEMPERATURE,"DyeingHead4 Over Temperature"},
+ {eHundredMillisecond,ALARM_SOURCE_TYPE__TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP5,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ5       ,270,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_5_OVERTEMPERATURE,"DyeingHead5 Over Temperature"},
+ {eHundredMillisecond,ALARM_SOURCE_TYPE__TemperatureAlarm,HEAD6_PT100, HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ6       ,270,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_6_OVERTEMPERATURE,"DyeingHead6 Over Temperature"},
+ {eHundredMillisecond,ALARM_SOURCE_TYPE__TemperatureAlarm,TEMP_SENSE_ANALOG_DRYER_TEMP1,  HARDWARE_PID_CONTROL_TYPE__DryerAirTemperature,270,true,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DRYER_ZONE_1_OVERTEMPERATURE,"Dryer Over Temperature"},
+
+ {eHundredMillisecond,ALARM_SOURCE_TYPE__CoversAlarm,FrontDoor1    ,1,false,true,DEBUG_LOG_CATEGORY__Error,  0xFF,5,EVENT_TYPE__FRONT_COVER_1_OPEN,"Front door #1 Open"},
+ {eHundredMillisecond,ALARM_SOURCE_TYPE__CoversAlarm,FrontDoor2    ,1,false,true,DEBUG_LOG_CATEGORY__Error,  0xFF,5,EVENT_TYPE__FRONT_COVER_2_OPEN,"Front door #2 Open"},
+ {eHundredMillisecond,ALARM_SOURCE_TYPE__CoversAlarm,FrontDoor3    ,1,false,true,DEBUG_LOG_CATEGORY__Error,  0xFF,5,EVENT_TYPE__FRONT_COVER_3_OPEN,"Front door #3 Open"},
+ {eHundredMillisecond,ALARM_SOURCE_TYPE__CoversAlarm,FrontDoor4    ,1,false,true,DEBUG_LOG_CATEGORY__Error,  0xFF,5,EVENT_TYPE__FRONT_COVER_4_OPEN,"Front door #4 Open"},
+ {eHundredMillisecond,ALARM_SOURCE_TYPE__CoversAlarm,RearDoor      ,1,false,true,DEBUG_LOG_CATEGORY__Error,  0xFF,5,EVENT_TYPE__REAR_COVER_OPEN,"Rear door Open"},
+ {eHundredMillisecond,ALARM_SOURCE_TYPE__CoversAlarm,CartridgesDoor,1,false,true,DEBUG_LOG_CATEGORY__Warning,0xFF,5,EVENT_TYPE__CARTRIDGES_COVER_OPEN,"Cartridges door Open"},
+
+ {eOneSecond,ALARM_SOURCE_TYPE__TemperatureAlarm,MIXER_PT100,   HARDWARE_PID_CONTROL_TYPE__MixerHeater        ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__MIXER_UNDERTEMPERATURE_A,"Mixer PT100 Not Heating"},
+ {eOneSecond,ALARM_SOURCE_TYPE__TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP1,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ1       ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_1_UNDERTEMPERATURE_A,"DyeingHead 1 PT100 Not Heating"},
+ {eOneSecond,ALARM_SOURCE_TYPE__TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP2,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ2       ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_2_UNDERTEMPERATURE_A,"DyeingHead 2 PT100 Not Heating"},
+ {eOneSecond,ALARM_SOURCE_TYPE__TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP3,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ3       ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_3_UNDERTEMPERATURE_A,"DyeingHead 3 PT100 Not Heating"},
+ {eOneSecond,ALARM_SOURCE_TYPE__TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP4,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ4       ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_4_UNDERTEMPERATURE_A,"DyeingHead 4 PT100 Not Heating"},
+ {eOneSecond,ALARM_SOURCE_TYPE__TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP5,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ5       ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_5_UNDERTEMPERATURE_A,"DyeingHead 5 PT100 Not Heating"},
+ {eOneSecond,ALARM_SOURCE_TYPE__TemperatureAlarm,HEAD6_PT100, HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ6       ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_6_UNDERTEMPERATURE_A,"DyeingHead 6 PT100 Not Heating"},
+ {eOneSecond,ALARM_SOURCE_TYPE__TemperatureAlarm,TEMP_SENSE_ANALOG_DRYER_TEMP1,  HARDWARE_PID_CONTROL_TYPE__DryerAirTemperature,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DRYER_ZONE_1_UNDERTEMPERATURE_A,"Dryer PT100 Not Heating"},
+ {eOneSecond,ALARM_SOURCE_TYPE__TemperatureAlarm,MIXER_PT100,   HARDWARE_PID_CONTROL_TYPE__MixerHeater        ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__MIXER_UNDERTEMPERATURE_B,"Mixer PT100 Heating Failure"},
+ {eOneSecond,ALARM_SOURCE_TYPE__TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP1,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ1       ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_1_UNDERTEMPERATURE_B,"DyeingHead 1 PT100 Heating Failure"},
+ {eOneSecond,ALARM_SOURCE_TYPE__TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP2,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ2       ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_2_UNDERTEMPERATURE_B,"DyeingHead 2 PT100 Heating Failure"},
+ {eOneSecond,ALARM_SOURCE_TYPE__TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP3,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ3       ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_3_UNDERTEMPERATURE_B,"DyeingHead 3 PT100 Heating Failure"},
+ {eOneSecond,ALARM_SOURCE_TYPE__TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP4,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ4       ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_4_UNDERTEMPERATURE_B,"DyeingHead 4 PT100 Heating Failure"},
+ {eOneSecond,ALARM_SOURCE_TYPE__TemperatureAlarm,TEMP_SENSE_ANALOG_DYEINGH_TEMP5,HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ5       ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_5_UNDERTEMPERATURE_B,"DyeingHead 5 PT100 Heating Failure"},
+ {eOneSecond,ALARM_SOURCE_TYPE__TemperatureAlarm,HEAD6_PT100, HARDWARE_PID_CONTROL_TYPE__HeadHeaterZ6       ,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DYEING_HEAD_ZONE_6_UNDERTEMPERATURE_B,"DyeingHead 6 PT100 Heating Failure"},
+ {eOneSecond,ALARM_SOURCE_TYPE__TemperatureAlarm,TEMP_SENSE_ANALOG_DRYER_TEMP1,  HARDWARE_PID_CONTROL_TYPE__DryerAirTemperature,9,false,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__DRYER_ZONE_1_UNDERTEMPERATURE_B,"Dryer PT100 Heating Failure"},
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_RLOADING        , HARDWARE_MOTOR_TYPE__MOTO_RLOADING        , x_STATUS_OCD          , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__RIGHT_LOADER_MOTOR_OVERCURRENT                         ,"Motor RightLoader Over Current"                },                                           /* 3004 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_LLOADING        , HARDWARE_MOTOR_TYPE__MOTO_LLOADING        , x_STATUS_OCD          , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__LEFT_LOADER_MOTOR_OVERCURRENT                          ,"Motor LeftLoader Over Current"                },                                           /* 3006 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM   , HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM   , x_STATUS_OCD          , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__LOADING_ARM_MOTOR_OVERCURRENT                          ,"Motor LoadindARM Over Current"                },                                           /* 3009 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_LDANCER2        , HARDWARE_MOTOR_TYPE__MOTO_LDANCER2        , x_STATUS_OCD          , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__WINDER_MOTOR_OVERCURRENT /*EVENT_TYPE__WINDER_DANCER_MOTOR_OVERCURRENT*/                       ,"Motor WinderDancer Over Current"            },   /* 3036 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_LDANCER1   , HARDWARE_MOTOR_TYPE__MOTO_LDANCER1   , x_STATUS_OCD          , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__PULLER_MOTOR_OVERCURRENT /*EVENT_TYPE__PULLER_DANCER_MOTOR_OVERCURRENT*/                       ,"Motor PullerDancer Over Current"            },   /* 3037 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_RDANCER   , HARDWARE_MOTOR_TYPE__MOTO_RDANCER   , x_STATUS_OCD          , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__FEEDER_MOTOR_OVERCURRENT /*EVENT_TYPE__FEEDER_DANCER_MOTOR_OVERCURRENT*/                       ,"Motor FeederDancer Over Current"            },   /* 3038 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID       , HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID       , x_STATUS_OCD          , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DRYER_MOTOR_OVERCURRENT  /*EVENT_TYPE__DRYER_LID_MOTOR_OVERCURRENT*/                           ,"Motor DryerLid Over Current"                },   /* 4017 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DH_LID          , HARDWARE_MOTOR_TYPE__MOTO_DH_LID          , x_STATUS_OCD          , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_COVER_MOTOR_OVERCURRENT                    ,"Motor DyeingHeadCover Over Current" },                                       /* 5031 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANMECH    , HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANMECH    , x_STATUS_OCD          , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_CLEANING_MECHANISM_MOTOR_OVERCURRENT       ,"Motor DyeingHeadCleaningMechanism Over Current"},                                       /* 5035 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANHEAD    , HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANHEAD    , x_STATUS_OCD          , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_CLEANING_HEAD_MOTOR_OVERCURRENT            ,"Motor DyeingHeadCleaningHead Over Current"    },                                       /* 5039 */
+
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_RLOADING        , HARDWARE_MOTOR_TYPE__MOTO_RLOADING        , x_STATUS_TH_SD        , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__RIGHT_LOADER_MOTOR_OVERTEMPERATURE                     ,"Motor RightLoader Over Temperature"            },                                           /* 3011 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_LLOADING        , HARDWARE_MOTOR_TYPE__MOTO_LLOADING        , x_STATUS_TH_SD        , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__LEFT_LOADER_MOTOR_OVERTEMPERATURE                      ,"Motor LeftLoader Over Temperature"            },                                           /* 3013 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM   , HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM   , x_STATUS_TH_SD        , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__LOADING_ARM_MOTOR_OVERTEMPERATURE                      ,"Motor LoadArm Over Temperature"                },                                           /* 3016 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_LDANCER2        , HARDWARE_MOTOR_TYPE__MOTO_LDANCER2        , x_STATUS_TH_SD        , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__WINDER_DANCER_MOTOR_OVERTEMPERATURE                    ,"Motor WinderDancer Over Temperature"        },                                           /* 3039 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_LDANCER1   , HARDWARE_MOTOR_TYPE__MOTO_LDANCER1   , x_STATUS_TH_SD        , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__PULLER_DANCER_MOTOR_OVERTEMPERATURE                    ,"Motor PullerDancer Over Temperature"        },                                           /* 3040 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_RDANCER   , HARDWARE_MOTOR_TYPE__MOTO_RDANCER   , x_STATUS_TH_SD        , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__FEEDER_DANCER_MOTOR_OVERTEMPERATURE                    ,"Motor FeederDancer Over Temperature"        },                                           /* 3041 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID       , HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID       , x_STATUS_TH_SD        , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DRYER_LID_MOTOR_OVERTEMPERATURE                        ,"Motor DryerLid Over Temperature"            },                                           /* 4018 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DH_LID          , HARDWARE_MOTOR_TYPE__MOTO_DH_LID          , x_STATUS_TH_SD        , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_COVER_MOTOR_OVERTEMPERATURE                ,"Motor DyeingHeadCover Over Temperature"        },                                           /* 5032 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANMECH    , HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANMECH    , x_STATUS_TH_SD        , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_CLEANING_MECHANISM_MOTOR_OVERTEMPERATURE   ,"Motor DyeingHeadCleaning Over Temperature"    },                                           /* 5036 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANHEAD    , HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANHEAD    , x_STATUS_TH_SD        , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_CLEANING_HEAD_MOTOR_OVERTEMPERATURE        ,"Motor DyeingHeadCleaningHead Over Temperature"},                                           /* 5040 */
+
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_RLOADING        , HARDWARE_MOTOR_TYPE__MOTO_RLOADING         ,x_STATUS_STEP_LOSS_A   , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__LOADING_ARM_MOTOR_STALL                                ,"Motor LoadingARM Stall "                   },                                           /* 3018 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_LLOADING        , HARDWARE_MOTOR_TYPE__MOTO_LLOADING         ,x_STATUS_STEP_LOSS_A   , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__WINDER_DANCER_MOTOR_STALL                              ,"Motor WinderDances Stall "                    },                                           /* 3020 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM   , HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM    ,x_STATUS_STEP_LOSS_A   , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__LOADING_ARM_MOTOR_STALL                                ,"Motor LoadingARM Stall "                   },                                           /* 3023 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_LDANCER2        , HARDWARE_MOTOR_TYPE__MOTO_LDANCER2         ,x_STATUS_STEP_LOSS_A   , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__WINDER_DANCER_MOTOR_STALL                              ,"Motor WinderDances Stall "                    },                                           /* 3042 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_LDANCER1   , HARDWARE_MOTOR_TYPE__MOTO_LDANCER1    ,x_STATUS_STEP_LOSS_A   , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__PULLER_DANCER_MOTOR_STALL                              ,"Motor PullerDancer Stall "                    },                                           /* 3043 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_RDANCER   , HARDWARE_MOTOR_TYPE__MOTO_RDANCER    ,x_STATUS_STEP_LOSS_A   , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__FEEDER_DANCER_MOTOR_STALL                              ,"Motor FeederDancer Stall "                    },                                           /* 3044 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID       , HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID        ,x_STATUS_STEP_LOSS_A   , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DRYER_LID_MOTOR_STALL                                  ,"Motor DryerLid Stall "                        },                                           /* 4019 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DH_LID          , HARDWARE_MOTOR_TYPE__MOTO_DH_LID           ,x_STATUS_STEP_LOSS_A   , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_COVER_MOTOR_STALL                          ,"Motor DyeingHeadCover Stall "                },                                           /* 5033 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANMECH    , HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANMECH     ,x_STATUS_STEP_LOSS_A   , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_CLEANING_MECHANISM_MOTOR_STALL             ,"Motor DyeingHeadCleaningMechanism Stall "    },                                           /* 5037 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANHEAD    , HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANHEAD     ,x_STATUS_STEP_LOSS_A   , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_CLEANING_HEAD_MOTOR_STALL                  ,"Motor DryeingHeadCleaning Stall "            },                                           /* 5041 */
+
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_RLOADING        , HARDWARE_MOTOR_TYPE__MOTO_RLOADING        , x_STATUS_UVLO         , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__RIGHT_LOADER_MOTOR_UNDERVOLTAGE                        ,"Motor RightLoader Under Voltage"               },                                           /* 3025 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_LLOADING        , HARDWARE_MOTOR_TYPE__MOTO_LLOADING        , x_STATUS_UVLO         , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__LEFT_LOADER_MOTOR_UNDERVOLTAGE                         ,"Motor LeftLoader Under Voltage"                },                                           /* 3027 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM   , HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM   , x_STATUS_UVLO         , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__LOADING_ARM_MOTOR_UNDERVOLTAGE                         ,"Motor LoaderARM Under Voltage"                },                                           /* 3030 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_LDANCER2        , HARDWARE_MOTOR_TYPE__MOTO_LDANCER2        , x_STATUS_UVLO         , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__WINDER_DANCER_MOTOR_UNDERVOLTAGE                       ,"Motor WinderDancer Under Voltage"            },                                           /* 3045 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_LDANCER1   , HARDWARE_MOTOR_TYPE__MOTO_LDANCER1   , x_STATUS_UVLO         , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__PULLER_DANCER_MOTOR_UNDERVOLTAGE                       ,"Motor PullerDancer Under Voltage"            },                                           /* 3046 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_RDANCER   , HARDWARE_MOTOR_TYPE__MOTO_RDANCER   , x_STATUS_UVLO         , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__FEEDER_DANCER_MOTOR_UNDERVOLTAGE                       ,"Motor FeederDancer Under Voltage"            },                                           /* 3047 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID       , HARDWARE_MOTOR_TYPE__MOTO_DRYER_LID       , x_STATUS_UVLO         , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DRYER_LID_MOTOR_UNDERVOLTAGE                           ,"Motor DryerLid Under Voltage"                },                                           /* 4020 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DH_LID          , HARDWARE_MOTOR_TYPE__MOTO_DH_LID          , x_STATUS_UVLO         , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_COVER_MOTOR_UNDERVOLTAGE                   ,"Motor DyeingHeadCover Under Voltage"        },                                           /* 5034 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANMECH    , HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANMECH    , x_STATUS_UVLO         , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_CLEANING_MECHANISM_MOTOR_UNDERVOLTAGE                ,"Motor DyeingHeadCleaning Under Voltage"        },                                           /* 5038 */
+ {eOneSecond, ALARM_SOURCE_TYPE__MotorAlarm, HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANHEAD    , HARDWARE_MOTOR_TYPE__MOTO_DH_CLEANHEAD    , x_STATUS_UVLO         , FALSE , DEBUG_LOG_CATEGORY__Error , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_CLEANING_HEAD_MOTOR_UNDERVOLTAGE           ,"Motor DyeingHeadCleaningHead Under Voltage"    },                                           /* 5042 */
+
+ {eOneSecond, ALARM_SOURCE_TYPE__CurrentAlarm, HEAD_ZONE_1  , HEAD_ZONE_1  , 125         , TRUE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_ZONE_1_CURRENT_OUT_OF_RANGE           ," Head Zone 1 Heater Current Out Of Range"    },                                           /* 5018 */
+ {eOneSecond, ALARM_SOURCE_TYPE__CurrentAlarm, HEAD_ZONE_2    , HEAD_ZONE_2    , 187         , TRUE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_ZONE_2_CURRENT_OUT_OF_RANGE           ," Head Zone 2 Heater Current Out Of Range"    },                                           /* 5019 */
+ {eOneSecond, ALARM_SOURCE_TYPE__CurrentAlarm, HEAD_ZONE_3    , HEAD_ZONE_3    , 187         , TRUE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_ZONE_3_CURRENT_OUT_OF_RANGE           ," Head Zone 3 Heater Current Out Of Range"    },                                           /* 5020 */
+ {eOneSecond, ALARM_SOURCE_TYPE__CurrentAlarm, HEAD_ZONE_4    , HEAD_ZONE_4    , 312         , TRUE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_ZONE_4_CURRENT_OUT_OF_RANGE           ," Head Zone 4 Heater Current Out Of Range"    },                                           /* 5021 */
+ {eOneSecond, ALARM_SOURCE_TYPE__CurrentAlarm, HEAD_ZONE_5_6    , HEAD_ZONE_5_6    , 500         , TRUE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_ZONE_5_6_CURRENT_OUT_OF_RANGE         ," Head Zone 5-6 Heater Current Out Of Range"    },                                           /* 5022 */
+ {eOneSecond, ALARM_SOURCE_TYPE__CurrentAlarm, MIXCHIP        , MIXCHIP        , 187         , TRUE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__MIXER_CURRENT_OUT_OF_RANGE                        ," Mixer Heater Current Out Of Range"    },                                           /* 6004 */
+ {eOneSecond, ALARM_SOURCE_TYPE__CurrentAlarm, DRYER_CURRENT_1, DRYER_CURRENT_1, 800         , TRUE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DRYER_HEATERS_ZONE_1_CURRENT_OUT_OF_RANGE         ," Drier Heater 1 Current Out Of Range"    },                                           /* 6004 */
+ {eOneSecond, ALARM_SOURCE_TYPE__CurrentAlarm, DRYER_CURRENT_2, DRYER_CURRENT_2, 400         , TRUE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DRYER_HEATERS_ZONE_2_CURRENT_OUT_OF_RANGE         ," Drier Heater 2 Current Out Of Range"    },                                           /* 6004 */
+
+ {eOneSecond, ALARM_SOURCE_TYPE__CurrentAlarm, HEAD_ZONE_1  , HEAD_ZONE_1  , 0         , FALSE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_ZONE_1_CURRENT_LOOP_BREAK           ," Head Zone 1 Heater Current Loop Break"    },                                           /* 5018 */
+ {eOneSecond, ALARM_SOURCE_TYPE__CurrentAlarm, HEAD_ZONE_2    , HEAD_ZONE_2    , 0         , FALSE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_ZONE_2_CURRENT_LOOP_BREAK           ," Head Zone 2 Heater Current Loop Break"    },                                           /* 5019 */
+ {eOneSecond, ALARM_SOURCE_TYPE__CurrentAlarm, HEAD_ZONE_3    , HEAD_ZONE_3    , 0         , FALSE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_ZONE_3_CURRENT_LOOP_BREAK           ," Head Zone 3 Heater Current Loop Break"    },                                           /* 5020 */
+ {eOneSecond, ALARM_SOURCE_TYPE__CurrentAlarm, HEAD_ZONE_4    , HEAD_ZONE_4    , 0         , FALSE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_ZONE_4_CURRENT_LOOP_BREAK           ," Head Zone 4 Heater Current Loop Break"    },                                           /* 5021 */
+ {eOneSecond, ALARM_SOURCE_TYPE__CurrentAlarm, HEAD_ZONE_5_6    , HEAD_ZONE_5_6    , 0         , FALSE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DYEING_HEAD_ZONE_5_6_CURRENT_LOOP_BREAK         ," Head Zone 5-6 Heater Current Loop Break"    },                                           /* 5022 */
+ {eOneSecond, ALARM_SOURCE_TYPE__CurrentAlarm, MIXCHIP        , MIXCHIP        , 0         , FALSE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__MIXER_CURRENT_LOOP_BREAK                        ," Mixer Heater Current Loop Break"    },                                           /* 6004 */
+ {eOneSecond, ALARM_SOURCE_TYPE__CurrentAlarm, DRYER_CURRENT_1, DRYER_CURRENT_1, 0         , FALSE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DRYER_HEATERS_ZONE_1_CURRENT_LOOP_BREAK         ," Drier Heater 1 Current Loop Break"    },                                           /* 6004 */
+ {eOneSecond, ALARM_SOURCE_TYPE__CurrentAlarm, DRYER_CURRENT_2, DRYER_CURRENT_2, 0         , FALSE , DEBUG_LOG_CATEGORY__Warning , 0xFF , 2 , EVENT_TYPE__DRYER_HEATERS_ZONE_2_CURRENT_LOOP_BREAK         ," Drier Heater 2 Current Loop Break"    },                                           /* 6004 */
+ {eOneSecond,ALARM_SOURCE_TYPE__DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Critical,0xFF,0,EVENT_TYPE__DYEING_HEAD_THERMAL_CUTOFF,"Dyeing head Thermal Cut-Off"},
+
+ {eOneSecond,ALARM_SOURCE_TYPE__DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Warning,0xFF,0,EVENT_TYPE__THREAD_BREAK,"Thread Break"},
+ {eOneSecond,ALARM_SOURCE_TYPE__DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Warning,0xFF,0,EVENT_TYPE__THREAD_TENSION_CONTROL_FAILURE_FEEDER_DANCER,"Thread Feeder Tension Control Failure"},
+ {eOneSecond,ALARM_SOURCE_TYPE__DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Warning,0xFF,0,EVENT_TYPE__THREAD_TENSION_CONTROL_FAILURE_PULLER_DANCER,"Thread Puller Tension Control Failure"},
+ {eOneSecond,ALARM_SOURCE_TYPE__DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Warning,0xFF,0,EVENT_TYPE__THREAD_TENSION_CONTROL_FAILURE_WINDER_DANCER,"Thread Winder Tension Control Failure"},
+ {eOneSecond,ALARM_SOURCE_TYPE__DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Warning,0xFF,0,EVENT_TYPE__WINDER_CONE_DOES_NOT_EXIST,"No cone in winder"},
+
+ {eOneSecond,ALARM_SOURCE_TYPE__DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Critical,0xFF,0,EVENT_TYPE__DRYER_DOOR_OPEN,"Dryer Door is open"},
+ {eOneSecond,ALARM_SOURCE_TYPE__DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Critical,0xFF,0,EVENT_TYPE__NO_AIR_PRESSURE,"No suction in the waste handling system"},
+ {eOneSecond,ALARM_SOURCE_TYPE__DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Critical,0xFF,0,EVENT_TYPE__AIR_FILTER_NOT_INSTALLED,"Air filter missing"},
+ {eOneSecond,ALARM_SOURCE_TYPE__DoNotPollAlarm,0,0,0,0,DEBUG_LOG_CATEGORY__Error,0xFF,0,EVENT_TYPE__WASTE_CONTAINER_EMPTYING_TIMEOUT,"Waste Container Emptying Timeout"},
 
 };
 
-char AlarmStorePath[25] = "0://SysInfo//AlarmPrm.cfg";
+char AlarmStorePath[25] ="0://SysInfo//AlarmPrm.cfg";
 
 bool DispenserInUse[MAX_SYSTEM_DISPENSERS] = {false,false,false,false,false,false,false,false};
 bool EventsNotificationRequestAccepted = false;
@@ -348,21 +372,28 @@ void AlarmHandlingInit(void)
 
     return;
 }
+void     AlarmHandlingSetFlags(bool checkHardLimitAlarms,bool checkCurrentAlarms, bool checkTamperAlarms)
+{
+    CheckHardLimitAlarms = checkHardLimitAlarms;
+    CheckCurrentAlarms = checkCurrentAlarms;
+    CheckTamperAlarms = checkTamperAlarms;
+}
+
 JobEndReasonEnum getEndReason(uint32_t AlarmId)
 {
     switch (AlarmItem[AlarmId].AlarmSource)
     {
-        case TemperatureAlarm:
+        case ALARM_SOURCE_TYPE__TemperatureAlarm:
             return JOB_TEMPERATURE_ALARM;
-        case LimitSwitchAlarm:
+        case ALARM_SOURCE_TYPE__LimitSwitchAlarm:
             return JOB_LS_ALARM;
-        case PressureAlarm:
+        case ALARM_SOURCE_TYPE__PressureAlarm:
             return JOB_PRESSURE_ALARM;
-        case CurrentAlarm:
+        case ALARM_SOURCE_TYPE__CurrentAlarm:
             return JOB_CURRENT_ALARM;
-        case MotorAlarm:
+        case ALARM_SOURCE_TYPE__MotorAlarm:
             return JOB_MOTOR_ALARM;
-        case CoversAlarm:
+        case ALARM_SOURCE_TYPE__CoversAlarm:
             return JOB_TAMPER_ALARM;
         default:
             return JOB_OTHER_ALARM;
@@ -374,12 +405,13 @@ uint32_t AlarmHandlingConsequentActions(uint32_t AlarmId, DebugLogCategory Sever
     //ProcessParameters ProcessParameterZero;
     switch (AlarmItem[AlarmId].AlarmSource)
     {
-        case TemperatureAlarm:
+        case ALARM_SOURCE_TYPE__TemperatureAlarm:
             //need to discover the heater Id and shut it down
             HeaterCommandRequestMessage(AlarmItem[AlarmId].ModuleDeviceId, HEATER_OFF, 0);
             break;
-        case LimitSwitchAlarm:
-        case PressureAlarm:
+        case ALARM_SOURCE_TYPE__LimitSwitchAlarm:
+        case ALARM_SOURCE_TYPE__HardLimitAlarm:
+        case ALARM_SOURCE_TYPE__PressureAlarm:
             if (Severity == DEBUG_LOG_CATEGORY__Info)
             {
                 IDS_Dispenser_Alarm_Off(AlarmItem[AlarmId].ModuleDeviceId);
@@ -389,9 +421,9 @@ uint32_t AlarmHandlingConsequentActions(uint32_t AlarmId, DebugLogCategory Sever
                 IDS_Dispenser_Alarm_On (AlarmItem[AlarmId].ModuleDeviceId);
             }
             break;
-        case CurrentAlarm:
+        case ALARM_SOURCE_TYPE__CurrentAlarm:
             break;
-        case MotorAlarm:
+        case ALARM_SOURCE_TYPE__MotorAlarm:
             MotorStop(AlarmItem[AlarmId].ModuleDeviceId,Hard_Hiz);
             break;
         default:
@@ -427,12 +459,12 @@ uint32_t AlarmHandlingConsequentActions(uint32_t AlarmId, DebugLogCategory Sever
         }
         /*switch (AlarmItem[AlarmId].AlarmSource)
         {
-            case TemperatureAlarm:
+            case ALARM_SOURCE_TYPE__TemperatureAlarm:
                 //need to discover the heater Id and shut it down
   //              HeaterCommandRequestMessage(                        HARDWARE_PID_CONTROL_TYPE__MixerHeater, false,
   //                      ProcessParams->mixertemp);
                 break;
-            case LimitSwitchAlarm:
+            case ALARM_SOURCE_TYPE__LimitSwitchAlarm:
                 if ((AlarmItem[AlarmId].EventType>=EVENT_TYPE__Dispenser1Empty)&&(AlarmItem[AlarmId].EventType<=EVENT_TYPE__Dispenser8Empty))
                 {
                     Disp_i = AlarmItem[AlarmId].EventType- EVENT_TYPE__Dispenser1Empty;
@@ -444,7 +476,7 @@ uint32_t AlarmHandlingConsequentActions(uint32_t AlarmId, DebugLogCategory Sever
                     }
                 }
                 break;
-            case PressureAlarm:
+            case ALARM_SOURCE_TYPE__PressureAlarm:
                 Disp_i = AlarmItem[AlarmId].EventType- EVENT_TYPE__Dispenser1Pressure;
                 MotorStop(HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_1+Disp_i,Hard_Hiz);
                 if (JobIsActive())
@@ -453,9 +485,9 @@ uint32_t AlarmHandlingConsequentActions(uint32_t AlarmId, DebugLogCategory Sever
                         AlarmItem[AlarmId].Severity = DEBUG_LOG_CATEGORY__Info;
                 }
                 break;
-            case CurrentAlarm:
+            case ALARM_SOURCE_TYPE__CurrentAlarm:
                 break;
-            case MotorAlarm:
+            case ALARM_SOURCE_TYPE__MotorAlarm:
                 break;
             default:
                 break;
@@ -531,7 +563,7 @@ JobEndReasonEnum AlarmHandlingPrepareJob(void *CurrentJob)
     }
     for (Alarm_i = 0;Alarm_i<MAX_SYSTEM_ALARMS;Alarm_i++)
     {
-        if (AlarmItem[Alarm_i].AlarmSource == CoversAlarm)
+        if (AlarmItem[Alarm_i].AlarmSource == ALARM_SOURCE_TYPE__CoversAlarm)
         {
             if (AlarmState[Alarm_i].Status == true)
             {
@@ -540,7 +572,7 @@ JobEndReasonEnum AlarmHandlingPrepareJob(void *CurrentJob)
                 break;
             }
         }
-        if (AlarmItem[Alarm_i].AlarmSource == MotorAlarm)
+        if (AlarmItem[Alarm_i].AlarmSource == ALARM_SOURCE_TYPE__MotorAlarm)
         {
             if (AlarmState[Alarm_i].Status == true)
             {
@@ -649,7 +681,7 @@ void AlarmHandlingInternalSetAlarm(uint32_t AlarmId, bool value)
                 }
                 else
                 {
-                    Report("Alarm ON ", __FILE__,__LINE__,AlarmItem[Alarm_i].EventType, RpMessage, value, Alarm_i);
+                    Report("Alarm OFF ", __FILE__,__LINE__,AlarmItem[Alarm_i].EventType, RpMessage, value, Alarm_i);
                     if (AlarmState[Alarm_i].EventPtr)
                         my_free(AlarmState[Alarm_i].EventPtr);
                 }
@@ -688,7 +720,7 @@ uint32_t AlarmHandlingStop(void)
 uint32_t AlarmHandlingLoop(uint32_t tick)
 {
     int Alarm_i;
-    uint32_t value;
+    int32_t value;
     //int32_t ivalue;
     bool Status = false;
     for (Alarm_i = 0;Alarm_i < MAX_SYSTEM_ALARMS;Alarm_i++)
@@ -698,7 +730,7 @@ uint32_t AlarmHandlingLoop(uint32_t tick)
         {
             switch (AlarmItem[Alarm_i].AlarmSource)
             {
-            /*case TemperatureAlarm:
+            /*case ALARM_SOURCE_TYPE__TemperatureAlarm:
                 ivalue = TemperatureSensorRead((TEMPERATURE_SENSOR_ID_ENUM)AlarmItem[Alarm_i].DeviceId);
                 if (AlarmItem[Alarm_i].AlarmDirection == true)
                 {
@@ -717,21 +749,45 @@ uint32_t AlarmHandlingLoop(uint32_t tick)
                     }
                 }
                 break;*/
-            case CoversAlarm:
-                value = Get_COVER_1_State(AlarmItem[Alarm_i].DeviceId);
-                if (value == AlarmItem[Alarm_i].AlarmValue)
+            case ALARM_SOURCE_TYPE__CoversAlarm:
+                if (CheckTamperAlarms)
                 {
-                    Status = true;
+                    value = Get_COVER_1_State(AlarmItem[Alarm_i].DeviceId);
+                    if (value == AlarmItem[Alarm_i].AlarmValue)
+                    {
+                        Status = true;
+                    }
+                }
+                else
+                {
+                    value = false;
                 }
                 break;
-            case LimitSwitchAlarm:
+            case ALARM_SOURCE_TYPE__LimitSwitchAlarm:
                 value = IDS_CheckDispenserLimitSwitch((LimitSwitchAlarms)AlarmItem[Alarm_i].DeviceId);
                 if (value == AlarmItem[Alarm_i].AlarmValue)
                 {
                     Status = true;
                 }
                 break;
-            case PressureAlarm:
+            case ALARM_SOURCE_TYPE__HardLimitAlarm:
+                if (CheckHardLimitAlarms)
+                {
+                    if (AlarmItem[Alarm_i].AlarmDirection == true)
+                    {
+                        value = Read_Notification_Disp_UP(AlarmItem[Alarm_i].DeviceId,NULL);
+                    }
+                    else
+                    {
+                        value = Read_Notification_Disp_Down(AlarmItem[Alarm_i].DeviceId,NULL);
+                    }
+                }
+                else
+                {
+                    value = false;
+                }
+                break;
+            case ALARM_SOURCE_TYPE__PressureAlarm:
                 value = GetDispenserPressure(AlarmItem[Alarm_i].DeviceId);
                 if (AlarmItem[Alarm_i].AlarmDirection == true)
                 {
@@ -748,24 +804,31 @@ uint32_t AlarmHandlingLoop(uint32_t tick)
                     }
                 }
                 break;
-            case CurrentAlarm:
-                value = Get_Heaters_Current_Integer(AlarmItem[Alarm_i].DeviceId);
-                if (AlarmItem[Alarm_i].AlarmDirection == true)
+            case ALARM_SOURCE_TYPE__CurrentAlarm:
+                if (CheckCurrentAlarms)
                 {
-                    if ((value >= (AlarmItem[Alarm_i].AlarmValue*1.07))||(value <= (AlarmItem[Alarm_i].AlarmValue*0.80)))
+                    value = Get_Heaters_Current_Integer(AlarmItem[Alarm_i].DeviceId);
+                    if (AlarmItem[Alarm_i].AlarmDirection == true)
                     {
-                        Status = true;
+                        if ((value >= (AlarmItem[Alarm_i].AlarmValue*1.07))||(value <= (AlarmItem[Alarm_i].AlarmValue*0.80)))
+                        {
+                            Status = true;
+                        }
+                    }
+                    else
+                    {
+                        if (value == 0)
+                        {
+                            Status = true;
+                        }
                     }
                 }
                 else
                 {
-                    if (value == 0)
-                    {
-                        Status = true;
-                    }
+                    value = false;
                 }
                 break;
-            case MotorAlarm:
+            case ALARM_SOURCE_TYPE__MotorAlarm:
                 if (isMotorConfigured((TimerMotors_t)AlarmItem[Alarm_i].DeviceId) == false)
                 {
                     Status = false;
@@ -787,8 +850,25 @@ uint32_t AlarmHandlingLoop(uint32_t tick)
                     }
                 }
                 break;
-            case TemperatureAlarm:
-            case DoNotPollAlarm:
+            case ALARM_SOURCE_TYPE__FluidLevelAlarm:
+                value = Get_MidTank_Int100_Sensor(AlarmItem[Alarm_i].DeviceId);
+                if (AlarmItem[Alarm_i].AlarmDirection == OVER_VALUE)
+                {
+                    if (value*100 > AlarmItem[Alarm_i].AlarmValue)
+                    {
+                        Status = true;
+                    }
+                }
+                else
+                {
+                    if (value*100 < AlarmItem[Alarm_i].AlarmValue)
+                    {
+                        Status = true;
+                    }
+                }
+                break;
+            case ALARM_SOURCE_TYPE__TemperatureAlarm:
+            case ALARM_SOURCE_TYPE__DoNotPollAlarm:
                 Status =  AlarmState[Alarm_i].Status;
                 break;
             default:
diff --git a/Software/Embedded_SW/Embedded/Modules/AlarmHandling/AlarmHandling.h b/Software/Embedded_SW/Embedded/Modules/AlarmHandling/AlarmHandling.h
index 4f9db2fc1..09dfa3f3d 100644
--- a/Software/Embedded_SW/Embedded/Modules/AlarmHandling/AlarmHandling.h
+++ b/Software/Embedded_SW/Embedded/Modules/AlarmHandling/AlarmHandling.h
@@ -21,5 +21,6 @@ JobEndReasonEnum AlarmHandlingPrepareJob(void *CurrentJob);
 uint32_t StartEventsNotificationRequestFunc(MessageContainer* requestContainer);
 uint32_t StopEventsNotificationRequestFunc(MessageContainer* requestContainer);
 uint32_t ResolveEventRequestFunc(MessageContainer* requestContainer);
+void     AlarmHandlingSetFlags(bool CheckHardLimitAlarms,bool CheckCurrentAlarms, bool checkTamperAlarms);
 
 #endif /* MODULES_ALARMHANDLING_ALARMHANDLING_H_ */
diff --git a/Software/Embedded_SW/Embedded/Modules/General/GeneralHardware.c b/Software/Embedded_SW/Embedded/Modules/General/GeneralHardware.c
index 97bb2e245..bacbe3bfb 100644
--- a/Software/Embedded_SW/Embedded/Modules/General/GeneralHardware.c
+++ b/Software/Embedded_SW/Embedded/Modules/General/GeneralHardware.c
@@ -189,7 +189,11 @@ uint32_t EmbeddedParametersInit(void)
     MidTankPressureCorrection(EmbeddedParameters.midtankpressurecorrection);
     SetDiagnosticCollectionLimit(EmbeddedParameters.diagnosticcollectionlimit);
     ThreadSetBreakSensorLimit(EmbeddedParameters.breaksensorlimit);
-
+    bool a1,a2,a3;
+    a1 = (EmbeddedParameters.generalparameters[0] < 0.5)?false:true;
+    a2 = (EmbeddedParameters.generalparameters[1] < 0.5)?false:true;
+    a3 = (EmbeddedParameters.generalparameters[2] < 0.5)?false:true;
+    AlarmHandlingSetFlags(a1,a2,a3);
 
     return Fresult;
 }
diff --git a/Software/Embedded_SW/Embedded/Modules/IDS/IDS_dispenser.c b/Software/Embedded_SW/Embedded/Modules/IDS/IDS_dispenser.c
index acaf19744..abfabe17d 100644
--- a/Software/Embedded_SW/Embedded/Modules/IDS/IDS_dispenser.c
+++ b/Software/Embedded_SW/Embedded/Modules/IDS/IDS_dispenser.c
@@ -62,10 +62,15 @@ uint32_t IdsGetMotorSpeed(uint32_t DispenserId)
 
 uint32_t IDS_Dispenser_Build_Pressure_Callback(uint32_t DispenserId, uint32_t ReadValue)
  {
+    uint32_t status;
     DispenserPrepareTime[DispenserId]+=DispenserPrepareTimeLag;
 
      if ((GetDispenserPressure(DispenserId)>=DispenserPreparePressure)||(DispenserPrepareTime[DispenserId]>=DispenserPrepareTimeout))
      {
+         if (DispenserPrepareTime[DispenserId]>=DispenserPrepareTimeout)
+             status = ERROR;
+         else
+             status = OK;
          if (SafeRemoveControlCallback(DispenserControlId[DispenserId], IDS_Dispenser_Build_Pressure_Callback )==OK)
              DispenserControlId[DispenserId] = 0xFF;
          else
@@ -76,11 +81,12 @@ uint32_t IDS_Dispenser_Build_Pressure_Callback(uint32_t DispenserId, uint32_t Re
 
          if (DispenserCallback[DispenserId])
          {
-             DispenserCallback[DispenserId](DispenserId,ReadValue);
+
+             DispenserCallback[DispenserId](DispenserId,status);
              DispenserCallback[DispenserId] = 0;
          }
      }
-     return OK;
+     return status;
 }
 
  uint32_t IDS_Dispenser_Build_Pressure(int DispenserId, callback_fptr callback)
diff --git a/Software/Embedded_SW/Embedded/Modules/IDS/IDS_ex.h b/Software/Embedded_SW/Embedded/Modules/IDS/IDS_ex.h
index bf73ed7fa..b201e6611 100644
--- a/Software/Embedded_SW/Embedded/Modules/IDS/IDS_ex.h
+++ b/Software/Embedded_SW/Embedded/Modules/IDS/IDS_ex.h
@@ -39,6 +39,9 @@ uint32_t IDSSegmentState(void *JobDetails, int SegmentId);
 uint32_t IDSDistanceToSpoolState(void);
 uint32_t IDSEndState(void *JobDetails);
 
+uint32_t IDS_StartLubrication(void);
+uint32_t IDS_StopLubrication(void);
+
 uint32_t IDS_DispenserPidRequestMessage(HardwarePidControl* request);
 uint32_t IDS_DispenserControlInit();
 
@@ -49,6 +52,7 @@ uint32_t IDS_Dispenser_Alarm_On (uint8_t deviceID);
 uint32_t IDS_Dispenser_Alarm_Off (uint8_t deviceID);
 
 uint32_t IDS_CheckDispenserLimitSwitch (LimitSwitchAlarms LS_Id);
+uint32_t IDS_Dispenser_Build_Pressure(int DispenserId, callback_fptr callback);
 
 void IDS_Dispenser_SetTimeOutValues(uint32_t CloseTimeout, uint32_t OpenTimeout);
 void IDS_Dispenser_SetBackLashValues(double   initialdispenserpressure,   uint32_t initialdispensertimeout,   uint32_t initialdispensertimelag);
diff --git a/Software/Embedded_SW/Embedded/Modules/IDS/IDS_maint.c b/Software/Embedded_SW/Embedded/Modules/IDS/IDS_maint.c
index db5d2738e..80db2a4e6 100644
--- a/Software/Embedded_SW/Embedded/Modules/IDS/IDS_maint.c
+++ b/Software/Embedded_SW/Embedded/Modules/IDS/IDS_maint.c
@@ -62,8 +62,8 @@ callback_fptr HomingRequestCallback[MAX_SYSTEM_DISPENSERS]={0,0,0,0,0,0,0,0};
 bool HomingActive[MAX_SYSTEM_DISPENSERS] = {false,false,false,false,false,false,false,false};
 uint32_t DispenserHomingControlId[MAX_SYSTEM_DISPENSERS] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
 uint32_t DispenserHomingTime[MAX_SYSTEM_DISPENSERS] = {0,0,0,0,0,0,0,0};
-#define INITIAL_DISPENSER_PRESSURE 0.10
-#define INITIAL_DISPENSER_TIMEOUT_LIMIT 10000
+#define INITIAL_DISPENSER_PRESSURE 2.10
+#define INITIAL_DISPENSER_TIMEOUT_LIMIT 60000
 #define INITIAL_DISPENSER_TIMEOUT 100
 
 double   InitialDispenserPressure = INITIAL_DISPENSER_PRESSURE;
diff --git a/Software/Embedded_SW/Embedded/Modules/IDS/IDS_print.c b/Software/Embedded_SW/Embedded/Modules/IDS/IDS_print.c
index 2be233962..adce14143 100644
--- a/Software/Embedded_SW/Embedded/Modules/IDS/IDS_print.c
+++ b/Software/Embedded_SW/Embedded/Modules/IDS/IDS_print.c
@@ -7,6 +7,7 @@
 #include "ids.h"
 #include "ids_ex.h"
 #include "../control/control.h"
+#include "../general/process.h"
 #include "../control/pidalgo.h"
 #include "../thread/thread.h"
 #include "PMR/Hardware/Hardwaremotor.pb-c.h"
@@ -31,11 +32,12 @@ typedef struct
     PID_Config_Params   m_params;
 }DispenserControlConfig_t;
 HardwarePidControl *DispensersControl;// = (HardwarePidControl *)GENHWCFG_MAP_IN_FLASH + 0x4000;
-
+#define LUBRICANT_DISPENSER 7
+#define MAX_DYE_DISPENSERS 7
 int32_t DispenserSamples[MAX_SYSTEM_DISPENSERS][MAX_CONTROL_SAMPLES] = {0};
 int DispenserSamplePointer[MAX_SYSTEM_DISPENSERS] = {0};
 double DispenserNormalizedErrorCoEfficient[MAX_SYSTEM_DISPENSERS] = {0};
-
+double lubricant_speed = 0.0;
 HardwarePidControlType ThreadDispenserIdToControlId[MAX_SYSTEM_DISPENSERS] = {  HARDWARE_PID_CONTROL_TYPE__Dispenser1,HARDWARE_PID_CONTROL_TYPE__Dispenser2,HARDWARE_PID_CONTROL_TYPE__Dispenser3,HARDWARE_PID_CONTROL_TYPE__Dispenser4,HARDWARE_PID_CONTROL_TYPE__Dispenser5,HARDWARE_PID_CONTROL_TYPE__Dispenser6,HARDWARE_PID_CONTROL_TYPE__Dispenser7,HARDWARE_PID_CONTROL_TYPE__Dispenser8};
 
 bool    DispenserReady[MAX_SYSTEM_DISPENSERS] = {true};
@@ -160,6 +162,13 @@ void DispenserPrepareReady(void)
                          if (JobTicket->segments[Segment_i]->brushstops[Brush_i]->dispensers[Dispenser_i]->nanolitterpersecond>0.0)
                          {
                              DispenserUsedInJob[DispenserId] = true;
+                             if(DispenserId == LUBRICANT_DISPENSER)
+                             {
+                                lubricant_speed = JobTicket->segments[0]->brushstops[0]->dispensers[Dispenser_i]->nanolitterpersecond/
+                                                 JobTicket->segments[0]->brushstops[0]->dispensers[Dispenser_i]->nanoliterperpulse;
+                                REPORT_MSG (lubricant_speed*100, "LUBRICANT_SPEED*100");
+                             }
+
                          }
                      }//for dispenser
                  }//if dispensers
@@ -280,7 +289,44 @@ bool IDS_isDispenserUsedNextSegment(void *JobDetails,int DispenserId, int Segmen
   return OK; // all configured heaters are ready
  }
 
+ int InterSegmentLength = 0;
+ int InterSegmentStepsLimit = 0,InterSegmentStepsCount = 0;
+ int InterSegmentWFCFTime;
+ uint32_t DispenserPreSegmentControlId = 0xFF;
 //********************************************************************************************************************
+
+ uint32_t IDSPreSegmentStateCallbackRunner(uint32_t IfIndex, uint32_t ReadValue)
+ {
+ /*
+  IDS Pre-Segment (Inter-Segment) activity
+1.     Cleaning
+2.     Build pressure toward the waste valve
+The IDS pre-segment process will be performed before all segments, including the first one.
+The dye dispensers will be in one of two states:
+1.     After being idle – with a high pressure, idle motor and closed valve (will be performed in job prepare or during the previous segment. For Ty time until pressure Pa is achieved)
+2.     At work – pushing dye to the mixer.
+At pre-segment, TW seconds before its end, the active dispensers will start working in the next segment's speed: Ssegment* WFCF.
+After TU milliseconds the valve will open.
+At segment start, the waste valve will be redirected to the head and the dispensers' speed will be reduced to the next segment's speed
+Cleaning: the cleaning process involves: starting the cleaning dispenser in speed Sclean, starting the head rockers motor(s) in speed S1 and S2,
+and stopping the dispenser, centering the rockers Tending milliseconds before segment start.
+Segment state:
+1.     Active dispensers are working.
+2.     Idle dispensers are filling, until TX+TY seconds before segment end. (TX=backlash time, TY=pressure prepare time). Then they reverse direction and start building pressure until segment end or until pressure PA (= prepare pressure) is achieved.
+This means that for each Pre-segment we must calculate: TW,TU,Tending,
+This means that for each segment we must calculate: Tx,Ty.
+
+  */
+     InterSegmentStepsLimit = InterSegmentLength*10;//100 millisec steps
+     InterSegmentStepsCount++;
+     if (InterSegmentStepsCount == InterSegmentStepsLimit)
+     {
+         IDS_Valve_PresegmentReady(1,0);
+         SafeRemoveControlCallback(DispenserPreSegmentControlId,IDSPreSegmentStateCallbackRunner);
+     }
+     return OK;
+ }
+
 uint32_t IDSPreSegmentState(void *JobDetails, int SegmentId)
 {
 //set the speed only before the first segment, speed is constant accros job
@@ -311,6 +357,15 @@ uint32_t IDSPreSegmentState(void *JobDetails, int SegmentId)
     if (( JobTicket->enableintersegment == true)&&(JobTicket->intersegmentlength>0))
     {
         Valve_Set(VALVE_MIXCHIP_WASTECH, Mixer_Waste); //if intersegment is defined throw the ink away
+        InterSegmentLength = (((JobTicket->intersegmentlength)*100)/dyeingspeed);
+        InterSegmentStepsLimit = InterSegmentLength*10;//100 millisec steps
+        InterSegmentStepsCount = 0;
+        /*DispenserPreSegmentControlId = AddControlCallback( IDSPreSegmentStateCallbackRunner, 100,TemplateDataReadCBFunction ,0, 0, 0 );
+        if (DispenserPreSegmentControlId == 0xFF)
+        {
+            Report("Add control callback failed",__FILE__,__LINE__,(int)InterSegmentLength,RpWarning,(int)0,0);
+            return ERROR;
+        }*/
     }
 
     if (JobTicket->segments[SegmentId]->brushstops[JobBrushStopId]->n_dispensers)
@@ -522,3 +577,18 @@ uint32_t IDSPreSegmentState(void *JobDetails, int SegmentId)
 
     return OK;
 }
+uint32_t IDS_StartLubrication(void)
+{
+    IDS_Dispenser_Start_Motor_and_Open_Valve(LUBRICANT_DISPENSER,lubricant_speed,NULL);
+    Lubricant_2Way_Valve (START);
+    return OK;
+}
+uint32_t IDS_StopLubrication(void)
+{
+    if(DispenserUsedInJob[LUBRICANT_DISPENSER])
+    {
+        IDS_Dispenser_Close_Valve_And_Stop_Motor(LUBRICANT_DISPENSER,IDS_Valve_EndValveReady);
+        Lubricant_2Way_Valve (STOP);
+    }
+    return OK;
+}
diff --git a/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c b/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c
index ff319918e..74a07e99c 100644
--- a/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c
+++ b/Software/Embedded_SW/Embedded/Modules/Thread/ThreadLoad.c
@@ -357,6 +357,7 @@
     {
         Report("Thread Load State Machine Callback.",__FILE__,__LINE__,LoadStages,RpMessage,NumberOfDrierLoaderCycles,0);
         REPORT_MSG(MotorId, "Thread_Load_Dryer_Loading_Callback Motor Id");
+        MotorMovetoEncoderPosition(HARDWARE_MOTOR_TYPE__MOTO_DRYER_LOADARM,0,0);
         if(ControlId != 0xFF)
         {
             MotorStop(ThreadMotorIdToMotorId[FEEDER_MOTOR],Hard_Hiz);
diff --git a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_Winder.c b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_Winder.c
index 0277d1daa..ddcba57bc 100644
--- a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_Winder.c
+++ b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_Winder.c
@@ -137,8 +137,16 @@ uint32_t Winder_PrepareStage2(uint32_t deviceID, uint32_t ReadValue)
     //MotorSetMaxSpeed (HARDWARE_MOTOR_TYPE__MOTO_SCREW,InternalWinderCfg.segmentoffsetpulses);
     //REPORT_MSG(numOfSteps, "Winder_PrepareStage2");
     REPORT_MSG(millisecondCounter/*MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_SCREW].maxfrequency*/, "Winder_PrepareStage2");
-
-    status |= MotorMoveWithCallback(HARDWARE_MOTOR_TYPE__MOTO_SCREW, (1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_SCREW].directionthreadwize),numOfSteps, Winder_ScrewAtOffsetCallback,1000);
+    if (ReadValue != LIMIT)
+    {
+        LOG_ERROR(ReadValue,"Screw failed to reach the limit switch!!");
+        //returned with a timeout
+        Winder_ScrewAtOffsetCallback(0,0);
+    }
+    else
+    {
+        status |= MotorMoveWithCallback(HARDWARE_MOTOR_TYPE__MOTO_SCREW, (1-MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_SCREW].directionthreadwize),numOfSteps, Winder_ScrewAtOffsetCallback,1000);
+    }
      //set motor location 0 here
         return status;
 
diff --git a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_print.c b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_print.c
index 6a8474438..a6ca46246 100644
--- a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_print.c
+++ b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_print.c
@@ -30,6 +30,7 @@
 #include "drivers/FPGA/FPGA_GPIO/FPGA_GPIO.h"
 #include "modules/heaters/heaters.h"
 #include "modules/General/process.h"
+#include "modules/ids/ids_ex.h"
 #include "Modules/AlarmHandling/AlarmHandling.h"
 #include "Control/MillisecTask.h"
 
@@ -708,6 +709,10 @@ uint32_t ThreadPreSegmentState(void *JobDetails, uint32_t SegmentId)
             MotorSetDirection((TimerMotors_t)HARDWARE_MOTOR_TYPE__MOTO_LLOADING,MotorsCfg[HARDWARE_MOTOR_TYPE__MOTO_LLOADING].directionthreadwize);
             MotorSetSpeed(HARDWARE_MOTOR_TYPE__MOTO_LLOADING, 1);
         }
+        if (JobTicket->enablelubrication == true)
+        {
+            IDS_StartLubrication();
+        }
     }
     // activate control fr all motors
     //set speed for both rocker motors
@@ -807,7 +812,7 @@ char Endstr[150];
      }
      MotorStop(HARDWARE_MOTOR_TYPE__MOTO_RLOADING,Hard_Hiz);
      MotorStop(HARDWARE_MOTOR_TYPE__MOTO_LLOADING,Hard_Hiz);
-
+     IDS_StopLubrication();
     return OK;
 }
 
diff --git a/Software/Embedded_SW/Embedded/Software Release Notes.txt b/Software/Embedded_SW/Embedded/Software Release Notes.txt
index 197e06361..581e45b2b 100644
--- a/Software/Embedded_SW/Embedded/Software Release Notes.txt	
+++ b/Software/Embedded_SW/Embedded/Software Release Notes.txt	
@@ -1,6 +1,6 @@
 Embedded SW Release note - Version 1.3.8.0
 This version includes 
-1. Init sequence - machine starts and start heating automatically (to last known process parameters)
+1. Init sequence - machine starts and DOES NOT start heating automatically (to last known process parameters)
 2. Thread load pieces in place
 3. Loading parameter and configuration files in SW update
 4. Current reading and alarms - initial
diff --git a/Software/Embedded_SW/Embedded/StateMachines/Initialization/InitSequence.c b/Software/Embedded_SW/Embedded/StateMachines/Initialization/InitSequence.c
index e385c33a2..15f8436c1 100644
--- a/Software/Embedded_SW/Embedded/StateMachines/Initialization/InitSequence.c
+++ b/Software/Embedded_SW/Embedded/StateMachines/Initialization/InitSequence.c
@@ -152,11 +152,30 @@ uint32_t InitSequenceInitialBlowerActivation(void)
     }
     return OK;
 }
+int NumOfCheckedDispnsers = 0;
+uint32_t InitSequenceDispenserPressureBuildUpTestCallBackFunction(uint32_t IfIndex, uint32_t BusyFlag)
+{
+    NumOfCheckedDispnsers--;
+    if(NumOfCheckedDispnsers==0)
+    {
+        InitStages++;
+        InitSequenceStateMachine(InitStages);
+        MachineState = MACHINE_STATE_DISPENSER_PRESSURE_BUILDUP_TEST;
+
+    }
+    return OK;
+}
 uint32_t InitSequenceDispenserPressureBuildUpTest(void)
 {
-    InitStages++;
-    InitSequenceStateMachine(InitStages);
-    MachineState = MACHINE_STATE_DISPENSER_PRESSURE_BUILDUP_TEST;
+    int Dispenser_i;
+
+    for (Dispenser_i = 0;Dispenser_i<MAX_SYSTEM_DISPENSERS;Dispenser_i++)
+    {
+        if (isMotorConfigured(Dispenser_i + HARDWARE_MOTOR_TYPE__MOTO_DISPENSER_1)==false)
+            IDS_Dispenser_Build_Pressure(Dispenser_i,InitSequenceDispenserPressureBuildUpTest);
+    }
+
+
    return OK;
 }
 uint32_t InitSequenceThreadDetection(void)
-- 
cgit v1.3.1


From 1cc50551034a4fbb5e00a9224dfd2a78d4ca9728 Mon Sep 17 00:00:00 2001
From: Shlomo Hecht <shlomo@twine-s.com>
Date: Tue, 19 Mar 2019 17:13:05 +0200
Subject: randomness test

---
 Software/Embedded_SW/Embedded/Modules/Thread/Thread_Winder.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'Software/Embedded_SW/Embedded/Modules/Thread')

diff --git a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_Winder.c b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_Winder.c
index ddcba57bc..d8a96a4d9 100644
--- a/Software/Embedded_SW/Embedded/Modules/Thread/Thread_Winder.c
+++ b/Software/Embedded_SW/Embedded/Modules/Thread/Thread_Winder.c
@@ -418,6 +418,7 @@ void ScrewsStartControlTimer (void)
     return;
 }
 
+int random = 0;
 void ScrewTimerInterrupt(int ARG0)
 {
     ROM_TimerIntClear(Screw_timerBase, TIMER_TIMA_TIMEOUT);  // Clear the timer interrupt
@@ -427,7 +428,7 @@ void ScrewTimerInterrupt(int ARG0)
     {
         ROM_TimerLoadSet(Screw_timerBase, TIMER_A,(int)ScrewRunningTime);
         MotorSetDirection (HARDWARE_MOTOR_TYPE__MOTO_SCREW, ScrewCurrentDirection);
-        MotorSetSpeedDirect(HARDWARE_MOTOR_TYPE__MOTO_SCREW,ScrewSpeed);
+        MotorSetSpeedDirect(HARDWARE_MOTOR_TYPE__MOTO_SCREW,ScrewSpeed+random);
         ScrewChangeCounter = 0;
         ScrewChangeLimit = ScrewRunningTime/12000000;
         ScrewDirectionChangeCounter++;
@@ -437,6 +438,9 @@ void ScrewTimerInterrupt(int ARG0)
         TimerDisable(Screw_timerBase, TIMER_A);
     }
     ROM_IntMasterEnable();
+    random++;
+    if (random >= 2)
+        random = -1;
     //Report("ScrewTimerInterrupt dir, duration, speed", __FILE__,ScrewCurrentDirection,ScrewRunningTime, RpMessage, ScrewSpeed, 0);
     //
     // Enable all interrupts.
-- 
cgit v1.3.1