//------------------------------------------------------------------------------
// <auto-generated>
// This code was generated by a tool.
// Tango Observables Generator
// 
// Changes to this file may cause incorrect behavior and will be lost if
// the code is regenerated. Do not modify!
// </auto-generated>
//------------------------------------------------------------------------------

using System;
using System.Collections.Generic;
using System.Collections.ObjectModel;
using System.Linq;
using System.ComponentModel;

namespace Tango.BL.Enumerations
{
    public enum TechMonitors
    {

        /// <summary>
        /// (Blower Voltage)
        /// </summary>
        [Description("Blower Voltage")]
        BlowerVoltage = 39,

        /// <summary>
        /// (Chiller Temperature)
        /// </summary>
        [Description("Chiller Temperature")]
        ChillerTemperature = 27,

        /// <summary>
        /// (Left Dancer)
        /// </summary>
        [Description("Left Dancer")]
        Dancer1Angle = 0,

        /// <summary>
        /// (Middle Dancer)
        /// </summary>
        [Description("Middle Dancer")]
        Dancer2Angle = 1,

        /// <summary>
        /// (Right Dancer)
        /// </summary>
        [Description("Right Dancer")]
        Dancer3Angle = 2,

        /// <summary>
        /// (Dispenser 1 Motor Frequency)
        /// </summary>
        [Description("Dispenser 1 Motor Frequency")]
        Dispenser1MotorFrequency = 28,

        /// <summary>
        /// (Dispenser 1 Pressure)
        /// </summary>
        [Description("Dispenser 1 Pressure")]
        Dispenser1Pressure = 40,

        /// <summary>
        /// (Dispenser 2 Motor Frequency)
        /// </summary>
        [Description("Dispenser 2 Motor Frequency")]
        Dispenser2MotorFrequency = 29,

        /// <summary>
        /// (Dispenser 2 Pressure)
        /// </summary>
        [Description("Dispenser 2 Pressure")]
        Dispenser2Pressure = 41,

        /// <summary>
        /// (Dispenser 3 Motor Frequency)
        /// </summary>
        [Description("Dispenser 3 Motor Frequency")]
        Dispenser3MotorFrequency = 30,

        /// <summary>
        /// (Dispenser 3 Pressure)
        /// </summary>
        [Description("Dispenser 3 Pressure")]
        Dispenser3Pressure = 42,

        /// <summary>
        /// (Dispenser 4 Motor Frequency)
        /// </summary>
        [Description("Dispenser 4 Motor Frequency")]
        Dispenser4MotorFrequency = 31,

        /// <summary>
        /// (Dispenser 4 Pressure)
        /// </summary>
        [Description("Dispenser 4 Pressure")]
        Dispenser4Pressure = 43,

        /// <summary>
        /// (Dispenser 5 Motor Frequency)
        /// </summary>
        [Description("Dispenser 5 Motor Frequency")]
        Dispenser5MotorFrequency = 32,

        /// <summary>
        /// (Dispenser 5 Pressure)
        /// </summary>
        [Description("Dispenser 5 Pressure")]
        Dispenser5Pressure = 44,

        /// <summary>
        /// (Dispenser 6 Motor Frequency)
        /// </summary>
        [Description("Dispenser 6 Motor Frequency")]
        Dispenser6MotorFrequency = 33,

        /// <summary>
        /// (Dispenser 6 Pressure)
        /// </summary>
        [Description("Dispenser 6 Pressure")]
        Dispenser6Pressure = 45,

        /// <summary>
        /// (Dispenser 7 Motor Frequency)
        /// </summary>
        [Description("Dispenser 7 Motor Frequency")]
        Dispenser7MotorFrequency = 34,

        /// <summary>
        /// (Dispenser 7 Pressure)
        /// </summary>
        [Description("Dispenser 7 Pressure")]
        Dispenser7Pressure = 46,

        /// <summary>
        /// (Dispenser 8 Motor Frequency)
        /// </summary>
        [Description("Dispenser 8 Motor Frequency")]
        Dispenser8MotorFrequency = 35,

        /// <summary>
        /// (Dispenser 8 Pressure)
        /// </summary>
        [Description("Dispenser 8 Pressure")]
        Dispenser8Pressure = 47,

        /// <summary>
        /// (Dispensers Angular Encoders)
        /// </summary>
        [Description("Dispensers Angular Encoders")]
        DispensersAngularEncoders = 22,

        /// <summary>
        /// (Dispensers Ink Level)
        /// </summary>
        [Description("Dispensers Ink Level")]
        DispensersInkLevel = 100,

        /// <summary>
        /// (Dispensers Linear Positions)
        /// </summary>
        [Description("Dispensers Linear Positions")]
        DispensersLinearPositions = 23,

        /// <summary>
        /// (Dispensers Motors)
        /// </summary>
        [Description("Dispensers Motors")]
        DispensersMotorsFrequency = 21,

        /// <summary>
        /// (Dispensers Pressure)
        /// </summary>
        [Description("Dispensers Pressure")]
        DispensersPressure = 24,

        /// <summary>
        /// (Drier Zone1 Heater Current)
        /// </summary>
        [Description("Drier Zone1 Heater Current")]
        DrierZone1HeaterCurrent = 56,

        /// <summary>
        /// (Drier Zone 2 Heater Current)
        /// </summary>
        [Description("Drier Zone 2 Heater Current")]
        DrierZone2HeaterCurrent = 57,

        /// <summary>
        /// (Dryer Air Flow)
        /// </summary>
        [Description("Dryer Air Flow")]
        DryerAirFlow = 19,

        /// <summary>
        /// (Dryer Motor)
        /// </summary>
        [Description("Dryer Motor")]
        DryerMotor = 4,

        /// <summary>
        /// (Dryer Zone 1)
        /// </summary>
        [Description("Dryer Zone 1")]
        DryerZone1Temperature = 16,

        /// <summary>
        /// (Dryer Zone 2)
        /// </summary>
        [Description("Dryer Zone 2")]
        DryerZone2Temperature = 17,

        /// <summary>
        /// (Dryer Zone 3)
        /// </summary>
        [Description("Dryer Zone 3")]
        DryerZone3Temperature = 18,

        /// <summary>
        /// (Feeder Motor)
        /// </summary>
        [Description("Feeder Motor")]
        FeederMotorFrequency = 3,

        /// <summary>
        /// (Feeder Tension)
        /// </summary>
        [Description("Feeder Tension")]
        FeederTension = 14,

        /// <summary>
        /// (Filter Delta Pressure)
        /// </summary>
        [Description("Filter Delta Pressure")]
        FilterDeltaPressure = 26,

        /// <summary>
        /// (Head Air Flow)
        /// </summary>
        [Description("Head Air Flow")]
        HeadAirFlow = 13,

        /// <summary>
        /// (Head Zone 1 Heater Current)
        /// </summary>
        [Description("Head Zone 1 Heater Current")]
        HeadZone1HeaterCurrent = 58,

        /// <summary>
        /// (Head Zone 1)
        /// </summary>
        [Description("Head Zone 1")]
        HeadZone1Temperature = 10,

        /// <summary>
        /// (Head Zone 2 Heater Current)
        /// </summary>
        [Description("Head Zone 2 Heater Current")]
        HeadZone2HeaterCurrent = 59,

        /// <summary>
        /// (Head Zone 2)
        /// </summary>
        [Description("Head Zone 2")]
        HeadZone2Temperature = 11,

        /// <summary>
        /// (Head Zone 3 Heater Current)
        /// </summary>
        [Description("Head Zone 3 Heater Current")]
        HeadZone3HeaterCurrent = 80,

        /// <summary>
        /// (Head Zone 3)
        /// </summary>
        [Description("Head Zone 3")]
        HeadZone3Temperature = 12,

        /// <summary>
        /// (Head Zone 4 Heater Current)
        /// </summary>
        [Description("Head Zone 4 Heater Current")]
        HeadZone4HeaterCurrent = 81,

        /// <summary>
        /// (Head Zone 4)
        /// </summary>
        [Description("Head Zone 4")]
        HeadZone4Temperature = 36,

        /// <summary>
        /// (Head Zone 5-6 Heater Current)
        /// </summary>
        [Description("Head Zone 5-6 Heater Current")]
        HeadZone5_6HeaterCurrent = 82,

        /// <summary>
        /// (Head Zone 5)
        /// </summary>
        [Description("Head Zone 5")]
        HeadZone5Temperature = 37,

        /// <summary>
        /// (Head Zone 6)
        /// </summary>
        [Description("Head Zone 6")]
        HeadZone6Temperature = 38,

        /// <summary>
        /// (Mid Tank 1 Level)
        /// </summary>
        [Description("Mid Tank 1 Level")]
        MidTank1Level = 48,

        /// <summary>
        /// (Mid Tank 2 Level)
        /// </summary>
        [Description("Mid Tank 2 Level")]
        MidTank2Level = 49,

        /// <summary>
        /// (Mid Tank 3 Level)
        /// </summary>
        [Description("Mid Tank 3 Level")]
        MidTank3Level = 50,

        /// <summary>
        /// (Mid Tank 4 Level)
        /// </summary>
        [Description("Mid Tank 4 Level")]
        MidTank4Level = 51,

        /// <summary>
        /// (Mid Tank 5 Level)
        /// </summary>
        [Description("Mid Tank 5 Level")]
        MidTank5Level = 52,

        /// <summary>
        /// (Mid Tank 6 Level)
        /// </summary>
        [Description("Mid Tank 6 Level")]
        MidTank6Level = 53,

        /// <summary>
        /// (Mid Tank 7 Level)
        /// </summary>
        [Description("Mid Tank 7 Level")]
        MidTank7Level = 54,

        /// <summary>
        /// (Mid Tank 8 Level)
        /// </summary>
        [Description("Mid Tank 8 Level")]
        MidTank8Level = 55,

        /// <summary>
        /// (Mid Tanks Ink Level)
        /// </summary>
        [Description("Mid Tanks Ink Level")]
        MidTanksInkLevel = 101,

        /// <summary>
        /// (Mixer 1 Heater Current)
        /// </summary>
        [Description("Mixer 1 Heater Current")]
        Mixer1HeaterCurrent = 83,

        /// <summary>
        /// (Mixer)
        /// </summary>
        [Description("Mixer")]
        MixerTemperature = 9,

        /// <summary>
        /// (Poller Motor)
        /// </summary>
        [Description("Poller Motor")]
        PollerMotor = 5,

        /// <summary>
        /// (Puller Tension)
        /// </summary>
        [Description("Puller Tension")]
        PullerTension = 15,

        /// <summary>
        /// (Screw Motor)
        /// </summary>
        [Description("Screw Motor")]
        ScrewMotor = 7,

        /// <summary>
        /// (Thread Speed)
        /// </summary>
        [Description("Thread Speed")]
        ThreadSpeed = 8,

        /// <summary>
        /// (Winder Motor)
        /// </summary>
        [Description("Winder Motor")]
        WinderMotor = 6,

        /// <summary>
        /// (Winder Tension)
        /// </summary>
        [Description("Winder Tension")]
        WinderTension = 20,

    }
}