//------------------------------------------------------------------------------
// <auto-generated>
// This#ifndef DATADEF_H
#define DATADEF_H
#include <stdlib.h>
#include <stdint.h>
#include <stdbool.h>
#include <driverlib/gpio.h>
//#define EVALUATION_BOARD // to use the LCD only when using the evaluation board
//#define USE_USB
//#define DEMO_TEMPERATURE 1
#define Stub_Mode 1
#define USE_HIGH_SPEED_GPIO // to use AHB GPIO (A..J) ports A-J APB or AHB, ports K-Q on AHB only
//#define WithTempSensorFiltrer (to use the function Filter_Temparature_Measurement)
//#define DEBUG_TEST_FUNCTIONS
#define HIZ_TIMEOUT 1000
#define MAX_STRING_LEN 255 //Embedded version + filter.c
#define MAX_ERR_SAMPLES 5 //Number of Samples before sending error
#define ERROR_TEMPERATURE_MEASUREMENT 0xFFFF
#define ON 1
#define OFF 0
enum
{
PASSED = 0,
FAILED = 1,
NOT_SUPPORTED = 254,
VERIFIED = 255
};
#define OK 0
#define ERROR 1
#define WARNING 2
#define ENABLE 1
#define DISABLE 0
//Valves Directions:
#define MidTank_Dispenser 0
#define Dispenser_Mixer 1
#define Cartridge_MidTank_ON 1
#define Cartridge_MidTank_OFF 0
#define Atm_MidTank_ON 1
#define Atm_MidTank_OFF 0
#define NEW 0
#define USED 1
#define START 0
#define STOP 1
#define NOSTOP 2
#define CONTINUE 2
#define NOTBUSY 0
#define BUSY 1
//
// motor direction
#define CW 0 // clockwise
#define CCW 1 // counter clockwise
#define TRUE 1
#define FALSE 0
#define INPUT 0x0
#define OUTPUT 0x1
#define PULLDOWN 0
#define PULLUP 1
#define TX 0
#define RX 1
#define TXRX 2
#define ODD 0
#define EVEN 1
#define READY 0
#define NOTREADY 1
#define WAIT 2
#define LOW 0x0
#define HIGH 0x1
#define WR 0
#define RD 1
#define FLAGSTART 1
#define FLAGSET 1
#define FLAGCLEAR 0
#define IN 2
#define OUT 3
#define INIT 1
#define SKIP_INIT 0
#define byte uint8_t//char
#define boolean bool
#define SERIAL 0x0
#define DISPLAY 0x1
#define LSBFIRST 0
#define MSBFIRST 1
#define CHANGE 1
#define FALLING 2
#define RISING 3
#define CLOSE 0
#define OPEN 1
#define DOUBLE_BUFFER 2
//#define FPGA_Reg_Size_Bits 16
#define MIDTANK_DIRECTION 0
#define MIXER_DIRECTION 1
#define MASK_LOW_BYTE_IN_WORD 0x00FF;
#define MASK_HIGH_BYTE_IN_WORD 0xFF00;
#define STATUS_GREEN_LED_ON ROM_GPIOPinWrite(GPIO_PORTN_BASE, GPIO_PIN_1, GPIO_PIN_1) //Turn ON STATUS Green LED
#define STATUS_RED_LED_ON ROM_GPIOPinWrite(GPIO_PORTS_BASE, GPIO_PIN_0, GPIO_PIN_0) //Turn ON STATUS Red LED
#define ACTIVITY_RED_LED_ON ROM_GPIOPinWrite(GPIO_PORTN_BASE, GPIO_PIN_0, GPIO_PIN_0) //Turn ON ACTIVITY Red LED
#define ACTIVITY_GREEN_LED_ON ROM_GPIOPinWrite(GPIO_PORTJ_BASE, GPIO_PIN_0, GPIO_PIN_0) //Turn ON ACTIVITY Green LED
#define COMM_RED_LED_ON ROM_GPIOPinWrite(GPIO_PORTP_BASE, GPIO_PIN_4, GPIO_PIN_4) //Turn ON COMM Red LED
#define COMM_GREEN_LED_ON ROM_GPIOPinWrite(GPIO_PORTJ_BASE, GPIO_PIN_1, GPIO_PIN_1) //Turn ON COMM Green LED
#define STATUS_GREEN_LED_OFF ROM_GPIOPinWrite(GPIO_PORTN_BASE, GPIO_PIN_1, 0) //Turn OFF STATUS Green LED
#define STATUS_RED_LED_OFF ROM_GPIOPinWrite(GPIO_PORTS_BASE, GPIO_PIN_0, 0) //Turn OFF STATUS Red LED
#define ACTIVITY_RED_LED_OFF ROM_GPIOPinWrite(GPIO_PORTN_BASE, GPIO_PIN_0, 0) //Turn OFF ACTIVITY Red LED
#define ACTIVITY_GREEN_LED_OFF ROM_GPIOPinWrite(GPIO_PORTJ_BASE, GPIO_PIN_0, 0) //Turn OFF ACTIVITY Green LED
#define COMM_RED_LED_OFF ROM_GPIOPinWrite(GPIO_PORTP_BASE, GPIO_PIN_4, 0) //Turn OFF Red LED LED
#define COMM_GREEN_LED_OFF ROM_GPIOPinWrite(GPIO_PORTJ_BASE, GPIO_PIN_1, 0) //Turn OFF COMM Green LED
#define STATUS_GREEN_LED_CHANGE_MODE ROM_GPIOPinWrite(GPIO_PORTN_BASE, GPIO_PIN_1, (ROM_GPIOPinRead(GPIO_PORTN_BASE, GPIO_PIN_1) ^ GPIO_PIN_1));
#define ACTIVITY_RED_LED_CHANGE_MODE ROM_GPIOPinWrite(GPIO_PORTN_BASE, GPIO_PIN_0, (ROM_GPIOPinRead(GPIO_PORTN_BASE, GPIO_PIN_0) ^ GPIO_PIN_0));
#define COMM_RED_CHANGE_MODE ROM_GPIOPinWrite(GPIO_PORTP_BASE, GPIO_PIN_4, (ROM_GPIOPinRead(GPIO_PORTP_BASE, GPIO_PIN_4) ^ GPIO_PIN_4));
#define BIT0 0x0001 //0x01 << 0
#define BIT1 0x0002 //0x01 << 1
#define BIT2 0x0004 //0x01 << 2
#define BIT3 0x0008 //0x01 << 3
#define BIT4 0x0010 //0x01 << 4
#define BIT5 0x0020 //0x01 << 5
#define BIT6 0x0040 //0x01 << 6
#define BIT7 0x0080 //0x01 << 7
#define BIT8 0x0100 //0x01 << 8
#define BIT9 0x0200 //0x01 << 9
#define BIT10 0x0400 //0x01 << 10
#define BIT11 0x0800 //0x01 << 11
#define BIT12 0x1000 //0x01 << 12
#define BIT13 0x2000 //0x01 << 13
#define BIT14 0x4000 //0x01 << 14
#define BIT15 0x8000 //0x01 << 15
#define BIT16 0x00010000 //0x01 << 16
#define BIT17 0x00020000 //0x01 << 17
#define BIT18 0x00040000 //0x01 << 18
#define BIT19 0x00080000 //0x01 << 19
#define BIT20 0x00100000 //0x01 << 20
#define BIT21 0x00200000 //0x01 << 21
#define BIT22 0x00400000 //0x01 << 22
#define BIT23 0x00800000 //0x01 << 23
#define BIT24 0x01000000 //0x01 << 24
#define BIT25 0x02000000 //0x01 << 25
#define BIT26 0x04000000 //0x01 << 26
#define BIT27 0x08000000 //0x01 << 27
#define BIT28 0x10000000 //0x01 << 28
#define BIT29 0x20000000 //0x01 << 29
#define BIT30 0x40000000 //0x01 << 30
#define BIT31 0x80000000 //0x01 << 31
//---------------------
#define MaxFlashWords 128 //1K
#define MaxFlashBytes MaxFlashWords*4 //4K Byte
#define MaxBytesForAddress 256 //The addresses to be programmed must not span a 256-byte boundary
typedef union
{
uint32_t DWords[MaxFlashWords];
uint8_t Bytes[MaxFlashBytes];
}Flash_Union;
//----------------------------
#define LIMIT 0 // Limit Switch
#define NO_LIMIT 1
//SPI
typedef struct //S_SPI
{
//unsigned char MotID; //- TODO to remove this field
unsigned int TX_MOSI; //32bit (Master Output Slave Input )
unsigned int RX_MISO; //24bit (Master Input Slave Output)
//unsigned int BUSY; //32bit
unsigned char AMT_OF_Words:3; //The amount of spi words (usually byte sized) per transmission (send 4 to 32bit)
}SPI;//SPI
#define SSI_SPI_TIMEOUT 1000
//---------------------------------------------------------------------
#pragma diag_suppress 169 /* Avoid warnings on VOID * conversions (protobuf issue)
The warning:
#169-D argument of type "size_t (*)(const CalculateResponse *, uint8_t *)" is incompatible with parameter of type "size_t (*)(void *, uint8_t *)" Calculate.c /twine_usblib_demo/PMR/Stubs line 53 C/C++ Problem
//#pragma diag_suppress 190 // Avoid the warning - #190-D enumerated type mixed with another type protobuf-c.c
*
or in the environment add command line:
Project -> properties ->
Press on show advanced settings
CCS Build ->
Advanced Options ->
Diagnistic Options ->
Add the warning number in
Supports diagnostic <id> (--diag_suppress, - pds)
169
190
*/
//Project Properties->Build->Compiler->Include Options
//There may be paths there relative to a build variable, rather than hard-coded paths, that may be triggering the error.
#endif /* DATADEF_H */
